FCC ID TFT-SL8080
850/900/1800/1900/2100 MHz multi-band Module
by MAXID Corp.
Grantee Code: TFT Product Code: SL8080
Latest application date: 2012-02-27
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 824.2-848.8 MHz | Class II permissive change or modification of presently authorized equipment | 2012-02-27 |
| 824.2-848.8 MHz | Change in identification of presently authorized equipment. Original FCC ID: N7NSL8080 Grant Date: 09/22/2010 | 2011-09-09 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Internal Photos | Internal Photos | 2012-04-09 | PDF 1.1 MB |
| SAR Report Internal Photos | Internal Photos | 2012-04-09 | PDF 231.3 KB |
| SAR Report External Photos | External Photos | 2012-04-09 | PDF 452.6 KB |
| External Photos | External Photos | 2011-09-09 | PDF 88.3 KB |
| Label Information | ID Label/Location Info | 2011-09-09 | PDF 257.8 KB |
| SAR Test Setup Photos | Test Setup Photos | 2012-04-09 | PDF 172.4 KB |
| Agency Agreement | Cover Letter(s) | 2012-02-27 | PDF 193.4 KB |
| Confidentiality Request | Cover Letter(s) | 2012-02-27 | PDF 18 KB |
| FCC Correspondence - KDB | Cover Letter(s) | 2012-02-27 | PDF 123.9 KB |
| FCC Cover Letter | Cover Letter(s) | 2012-02-27 | PDF 17.6 KB |
| Change in ID Authorization | Cover Letter(s) | 2011-09-09 | PDF 10.1 KB |
| Change in ID Request | Cover Letter(s) | 2011-09-09 | PDF 157.4 KB |
| SAR Report 1 of 3 | RF Exposure Info | 2012-02-27 | PDF 2.7 MB |
| SAR Report 2 of 3 | RF Exposure Info | 2012-02-27 | PDF 4 MB |
| SAR Report 3 of 3 | RF Exposure Info | 2012-02-27 | PDF 465.7 KB |
Application Information
| Application ID | b5zfm1R+x5ej/VoMUS4KfA== |
|---|---|
| Final Action Date | 2012-02-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0018448183 |
| Model | -SL8080 |
| Frequency Range | 824.2-848.8 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | 850/900/1800/1900/2100 MHz multi-band Module |
| Responsible Party | Steve Bowen, Mr, steve.bowen@maxid.net  , 7572136863 |
| Agent | Sam Sam Sam, Advanced Compliance Solutions, Inc., swismer@acstestlab.com  , 770 831 8048 |
| Test Firm | Randy Abernathy, Advanced Compliance Solutions, Inc., rabernathy@acstestlab.com , 770-831-8048 |
| TCB Email | jwoods@acstestlab.com |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27 |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 04/09/2012 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is Conducted. Antenna gain including cable loss must not exceed 6.0 dBi in Cellular Band and 3.5 dBi in the PCS band, for purposes of 2.1091. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss, must satisfy the MPE categorical exclusion requirements of 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. The final product must include operating instructions and applicable warnings for end-users and installers to satisfy RF exposure compliance requirements. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for 850 and 1900 MHz Licensed operations. Class II Change to address co-location with FCC ID: TFT-IDL300 and FCC ID: TFT-W2CBW003 in the iDL300 portable host. The highest reported extremity (hand) SAR is 0.902 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| b5zfm1R+x5ej/VoMUS4KfA== | 2012-02-27 | Class II permissive change or modification of presently authorized equipment |
| SqgMk82++vkRD9JDnNJALg== | 2011-09-09 | Change in identification of presently authorized equipment. Original FCC ID: N7NSL8080 Grant Date: 09/22/2010 |
Equipment Authorization
Grants
TCB Grant - Application SqgMk82++vkRD9JDnNJALg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 09/09/2011 Application Dated: 09/09/2011 |
| MAXID Corp. |
| 4445 Corporation Lane |
| 2nd floor |
| Virginia Beach, VA 23462 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT-SL8080 |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | 850/900/1800/1900/2100 MHz multi-band Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 22H | 824.2 - 848.8 | 1.74 | 2.5 PM | 244KGXW |
| BC | 22H | 824.2 - 848.8 | 0.92 | 2.5 PM | 244KG7W |
| BC | 22H | 826.4 - 846.6 | 0.37 | 2.5 PM | 4M16F9W |
| BC | 24E | 1850.2 - 1909.8 | 0.83 | 2.5 PM | 244KGXW |
| BC | 24E | 1850.2 - 1909.8 | 0.706 | 2.5 PM | 244KG7W |
| BC | 24E | 1852.4 - 1907.6 | 0.437 | 2.5 PM | 4M16F9W |
| Power Output listed is Conducted. Antenna gain including cable loss must not exceed 6.0 dBi in Cellular Band and 3.5 dBi in the PCS band, for purposes of 2.1091. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss, must satisfy the MPE categorical exclusion requirements of 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. The final product must include operating instructions and applicable warnings for end-users and installers to satisfy RF exposure compliance requirements. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for 850 and 1900 MHz Licensed operations. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
EAS Grant - Application SqgMk82++vkRD9JDnNJALg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MAXID Corp. 4445 Corporation Lane 2nd floor Virginia Beach, VA 23462 United States |
Date of Grant: 09/09/2011 Application Dated: 09/09/2011 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT-SL8080 |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | 850/900/1800/1900/2100 MHz multi-band Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 22H | 824.2 - 848.8 | 1.74 | 2.5 PM | 244KGXW |
| BC | 22H | 824.2 - 848.8 | 0.92 | 2.5 PM | 244KG7W |
| BC | 22H | 826.4 - 846.6 | 0.37 | 2.5 PM | 4M16F9W |
| BC | 24E | 1850.2 - 1909.8 | 0.83 | 2.5 PM | 244KGXW |
| BC | 24E | 1850.2 - 1909.8 | 0.706 | 2.5 PM | 244KG7W |
| BC | 24E | 1852.4 - 1907.6 | 0.437 | 2.5 PM | 4M16F9W |
| Power Output listed is Conducted. Antenna gain including cable loss must not exceed 6.0 dBi in Cellular Band and 3.5 dBi in the PCS band, for purposes of 2.1091. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss, must satisfy the MPE categorical exclusion requirements of 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. The final product must include operating instructions and applicable warnings for end-users and installers to satisfy RF exposure compliance requirements. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for 850 and 1900 MHz Licensed operations. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 02/27/2012 Application Dated: 02/24/2012 |
| MAXID Corp. |
| 4445 Corporation Lane |
| 2nd floor |
| Virginia Beach, VA 23462 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT-SL8080 |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | 850/900/1800/1900/2100 MHz multi-band Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 22H | 824.2 - 848.8 | 1.74 | 2.5 PM | 244KGXW |
| BC | 22H | 824.2 - 848.8 | 0.92 | 2.5 PM | 244KG7W |
| BC | 22H | 826.4 - 846.6 | 0.37 | 2.5 PM | 4M16F9W |
| BC | 24E | 1850.2 - 1909.8 | 0.83 | 2.5 PM | 244KGXW |
| BC | 24E | 1850.2 - 1909.8 | 0.706 | 2.5 PM | 244KG7W |
| BC | 24E | 1852.4 - 1907.6 | 0.437 | 2.5 PM | 4M16F9W |
| Power Output listed is Conducted. Antenna gain including cable loss must not exceed 6.0 dBi in Cellular Band and 3.5 dBi in the PCS band, for purposes of 2.1091. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss, must satisfy the MPE categorical exclusion requirements of 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. The final product must include operating instructions and applicable warnings for end-users and installers to satisfy RF exposure compliance requirements. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for 850 and 1900 MHz Licensed operations. Class II Change to address co-location with FCC ID: TFT-IDL300 and FCC ID: TFT-W2CBW003 in the iDL300 portable host. The highest reported extremity (hand) SAR is 0.902 W/kg. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
EAS Grant - Application b5zfm1R+x5ej/VoMUS4KfA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MAXID Corp. 4445 Corporation Lane 2nd floor Virginia Beach, VA 23462 United States |
Date of Grant: 02/27/2012 Application Dated: 02/24/2012 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT-SL8080 |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | 850/900/1800/1900/2100 MHz multi-band Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 22H | 824.2 - 848.8 | 1.74 | 2.5 PM | 244KGXW |
| BC | 22H | 824.2 - 848.8 | 0.92 | 2.5 PM | 244KG7W |
| BC | 22H | 826.4 - 846.6 | 0.37 | 2.5 PM | 4M16F9W |
| BC | 24E | 1850.2 - 1909.8 | 0.83 | 2.5 PM | 244KGXW |
| BC | 24E | 1850.2 - 1909.8 | 0.706 | 2.5 PM | 244KG7W |
| BC | 24E | 1852.4 - 1907.6 | 0.437 | 2.5 PM | 4M16F9W |
| Power Output listed is Conducted. Antenna gain including cable loss must not exceed 6.0 dBi in Cellular Band and 3.5 dBi in the PCS band, for purposes of 2.1091. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss, must satisfy the MPE categorical exclusion requirements of 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. The final product must include operating instructions and applicable warnings for end-users and installers to satisfy RF exposure compliance requirements. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for 850 and 1900 MHz Licensed operations. Class II Change to address co-location with FCC ID: TFT-IDL300 and FCC ID: TFT-W2CBW003 in the iDL300 portable host. The highest reported extremity (hand) SAR is 0.902 W/kg. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
| Mail To: |