FCC ID TFT-W2CBW003
802.11 b/g + Bluetooth Module
by MAXID Corp.
Grantee Code: TFT Product Code: W2CBW003
Latest application date: 2012-02-27
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2012-02-27 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2012-02-27 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: U9R-W2CBW003 Grant Date: 06/02/2007 | 2011-08-31 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: U9R-W2CBW003 Grant Date: 06/02/2007 | 2011-08-31 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Internal Photos | Internal Photos | 2012-04-09 | PDF 1.1 MB |
| SAR Report Internal Photos | Internal Photos | 2012-04-09 | PDF 231.3 KB |
| SAR Report External Photos | External Photos | 2012-04-09 | PDF 452.6 KB |
| External Photos | External Photos | 2011-08-31 | PDF 50.3 KB |
| Label Information | ID Label/Location Info | 2011-08-31 | PDF 50.3 KB |
| Radiated Test Setup Photos | Test Setup Photos | 2012-04-09 | PDF 3.1 MB |
| SAR Test Setup Photos | Test Setup Photos | 2012-04-09 | PDF 172.4 KB |
| Test Report - DSS | Test Report | 2012-02-27 | PDF 106.2 KB |
| Test Report - DTS | Test Report | 2012-02-27 | PDF 71.6 KB |
| Agency Agreement | Cover Letter(s) | 2012-02-27 | PDF 193.6 KB |
| Confidentaility Request | Cover Letter(s) | 2012-02-27 | PDF 38.3 KB |
| Confidentiality Request | Cover Letter(s) | 2012-02-27 | PDF 38.3 KB |
| FCC Correspondence - KDB | Cover Letter(s) | 2012-02-27 | PDF 123.9 KB |
| FCC Cover Letter | Cover Letter(s) | 2012-02-27 | PDF 17.7 KB |
| Change in ID Authorization | Cover Letter(s) | 2011-08-31 | PDF 24.6 KB |
| Change in ID Authorization Letter | Cover Letter(s) | 2011-08-31 | PDF 24.6 KB |
| Change in ID Request | Cover Letter(s) | 2011-08-31 | PDF 232.3 KB |
| Change in ID Request Letter | Cover Letter(s) | 2011-08-31 | PDF 232.3 KB |
| SAR Report 1 of 3 | RF Exposure Info | 2012-02-27 | PDF 2.7 MB |
| SAR Report 2 of 3 | RF Exposure Info | 2012-02-27 | PDF 4 MB |
| SAR Report 3 of 3 | RF Exposure Info | 2012-02-27 | PDF 465.7 KB |
Application Information
| Application ID | tS8hfF7FfwpqFAUxDURBdw== |
|---|---|
| Final Action Date | 2012-02-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0018448183 |
| Model | -W2CBW003 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | 802.11 b/g + Bluetooth Module |
| Responsible Party | Steve Bowen, Mr, steve.bowen@maxid.net  , 7572136863 |
| Agent | Sam Sam Sam, Advanced Compliance Solutions, Inc., swismer@acstestlab.com  , 770 831 8048 |
| Test Firm | Randy Abernathy, Advanced Compliance Solutions, Inc., rabernathy@acstestlab.com , 770-831-8048 |
| TCB Email | jwoods@acstestlab.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 04/09/2012 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. Class II Change to address co-location with FCC ID: TFT-IDL300 and FCC ID: TFT-SL8080 in the iDL300 portable host. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| tS8hfF7FfwpqFAUxDURBdw== | 2012-02-27 | Class II permissive change or modification of presently authorized equipment |
| YmeBJXX0XdxJ/GbX2hy+JA== | 2012-02-27 | Class II permissive change or modification of presently authorized equipment |
| DDJyIF91l4+R6bal5VaTOw== | 2011-08-31 | Change in identification of presently authorized equipment. Original FCC ID: U9R-W2CBW003 Grant Date: 06/02/2007 |
| 5ZJjl5ZbABn1Dl4Z3x3D7A== | 2011-08-31 | Change in identification of presently authorized equipment. Original FCC ID: U9R-W2CBW003 Grant Date: 06/02/2007 |
Equipment Authorization
Grants
TCB Grant - Application YmeBJXX0XdxJ/GbX2hy+JA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 02/27/2012 Application Dated: 02/24/2012 |
| MAXID Corp. |
| 4445 Corporation Lane |
| 2nd floor |
| Virginia Beach, VA 23462 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT-W2CBW003 |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.03342 | ||
| 15C | 2412.0 - 2462.0 | 0.001928 |
| Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. Class II Change to address co-location with FCC ID: TFT-IDL300 and FCC ID: TFT-SL8080 in the iDL300 portable host. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application YmeBJXX0XdxJ/GbX2hy+JA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MAXID Corp. 4445 Corporation Lane 2nd floor Virginia Beach, VA 23462 United States |
Date of Grant: 02/27/2012 Application Dated: 02/24/2012 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT-W2CBW003 |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.03342 | ||
| 15C | 2412.0 - 2462.0 | 0.001928 |
| Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. Class II Change to address co-location with FCC ID: TFT-IDL300 and FCC ID: TFT-SL8080 in the iDL300 portable host. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 02/27/2012 Application Dated: 02/24/2012 |
| MAXID Corp. |
| 4445 Corporation Lane |
| 2nd floor |
| Virginia Beach, VA 23462 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT-W2CBW003 |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11 b/g + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00336 |
| Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. Class II Change to address co-location with FCC ID: TFT-IDL300 and FCC ID: TFT-SL8080 in the iDL300 portable host. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application tS8hfF7FfwpqFAUxDURBdw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MAXID Corp. 4445 Corporation Lane 2nd floor Virginia Beach, VA 23462 United States |
Date of Grant: 02/27/2012 Application Dated: 02/24/2012 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT-W2CBW003 |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11 b/g + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00336 |
| Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. Class II Change to address co-location with FCC ID: TFT-IDL300 and FCC ID: TFT-SL8080 in the iDL300 portable host. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 08/31/2011 Application Dated: 08/31/2011 |
| MAXID Corp. |
| 4445 Corporation Lane |
| 2nd floor |
| Virginia Beach, VA 23462 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT-W2CBW003 |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.03342 | ||
| 15C | 2412.0 - 2462.0 | 0.001928 |
| Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application DDJyIF91l4+R6bal5VaTOw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MAXID Corp. 4445 Corporation Lane 2nd floor Virginia Beach, VA 23462 United States |
Date of Grant: 08/31/2011 Application Dated: 08/31/2011 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT-W2CBW003 |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.03342 | ||
| 15C | 2412.0 - 2462.0 | 0.001928 |
| Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 08/31/2011 Application Dated: 08/31/2011 |
| MAXID Corp. |
| 4445 Corporation Lane |
| 2nd floor |
| Virginia Beach, VA 23462 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT-W2CBW003 |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11 b/g + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00336 |
| Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 5ZJjl5ZbABn1Dl4Z3x3D7A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MAXID Corp. 4445 Corporation Lane 2nd floor Virginia Beach, VA 23462 United States |
Date of Grant: 08/31/2011 Application Dated: 08/31/2011 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT-W2CBW003 |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11 b/g + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00336 |
| Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |