FCC ID TFT533ANM
Intel Wi-Fi Link 5300 Series
by MAXID Corp.
Grantee Code: TFT Product Code: 533ANM
Latest application date: 2011-10-19
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2011-10-19 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2011-10-19 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9533ANM Grant Date: 07/01/2008 | 2011-09-27 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9533ANM Grant Date: 07/01/2008 | 2011-09-27 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Internal Photos | Internal Photos | 2011-12-03 | PDF 2.1 MB |
| External Photos | External Photos | 2011-09-27 | PDF 423.7 KB |
| Label Information | ID Label/Location Info | 2011-10-19 | PDF 212.4 KB |
| Label Information | ID Label/Location Info | 2011-09-27 | PDF 238.5 KB |
| Labell Information | ID Label/Location Info | 2011-09-27 | PDF 238.5 KB |
| Test Setup Photos | Test Setup Photos | 2011-12-03 | PDF 1.7 MB |
| Agency Agreement | Cover Letter(s) | 2011-10-19 | PDF 193.6 KB |
| FCC Cover Letter | Cover Letter(s) | 2011-10-19 | PDF 39.8 KB |
| Short Term Confidentiality Request | Cover Letter(s) | 2011-10-19 | PDF 42.9 KB |
| Agency Agreement Letter | Cover Letter(s) | 2011-09-27 | PDF 193.6 KB |
| Change in ID Authorization Letter | Cover Letter(s) | 2011-09-27 | PDF 29.6 KB |
| Change in ID Request Letter | Cover Letter(s) | 2011-09-27 | PDF 232.3 KB |
| SAR Report | RF Exposure Info | 2011-10-19 | PDF 4.4 MB |
Application Information
| Application ID | fnQB0bHDdAWA3ThjDBwBGQ== |
|---|---|
| Final Action Date | 2011-10-19 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0018448183 |
| Model | 533ANM |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Intel Wi-Fi Link 5300 Series |
| Responsible Party | Steve Bowen, Mr, steve.bowen@maxid.net  , 7572136863 |
| Agent | Sam Sam Sam, Advanced Compliance Solutions, Inc., swismer@acstestlab.com  , 770 831 8048 |
| Test Firm | Randy Abernathy, Advanced Compliance Solutions, Inc., rabernathy@acstestlab.com , 770-831-8048 |
| TCB Email | jwoods@acstestlab.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 12/03/2011 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Power Output listed is Conducted. Modular approval. This module is approved for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. Single Modular Class II Change to address co-location with FCC ID: TFTWT12 and FCC ID: TFT-MC8795 inside portable host TFT-IDL750 as described in this filing. The highest reported SAR is 0.269 W/kg; the highest summation of 1-g SAR is 0.728 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| fnQB0bHDdAWA3ThjDBwBGQ== | 2011-10-19 | Class II permissive change or modification of presently authorized equipment |
| e1hMHeFgtCwruT7eOTu2gQ== | 2011-10-19 | Class II permissive change or modification of presently authorized equipment |
| rOWZqDAZL+oUA/JR+CnDsg== | 2011-09-27 | Change in identification of presently authorized equipment. Original FCC ID: PD9533ANM Grant Date: 07/01/2008 |
| 7jRz6dioAgglCZuAUwoF5g== | 2011-09-27 | Change in identification of presently authorized equipment. Original FCC ID: PD9533ANM Grant Date: 07/01/2008 |
| 2kQZDEzoKX/T4fSfB7GfPA== | 2011-09-27 | Change in identification of presently authorized equipment. Original FCC ID: PD9533ANM Grant Date: 07/01/2008 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 15B | CC | ||
| 2412-2462 MHz | 0.07 | 15C | CC, MO |
| 2422-2452 MHz | 0.13 | 15C | CC, MO |
| 5180-5240 MHz | 0.045 | 15E | CC, MO |
| 5190-5230 MHz | 0.045 | 15E | CC, MO |
| 5260-5320 MHz | 0.11 | 15E | CC, MO |
| 5270-5310 MHz | 0.087 | 15E | CC, MO |
| 5500-5700 MHz | 0.11 | 15E | CC, MO |
| 5510-5670 MHz | 0.081 | 15E | CC, MO |
| 5745-5825 MHz | 0.063 | 15C | CC, MO |
| 5755-5795 MHz | 0.068 | 15C | CC, MO |
Grants
TCB Grant - Application rOWZqDAZL+oUA/JR+CnDsg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 09/27/2011 Application Dated: 09/27/2011 |
| MAXID Corp. |
| 4445 Corporation Lane |
| 2nd floor |
| Virginia Beach, VA 23462 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT533ANM |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wi-Fi Link 5300 Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.07 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.13 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.063 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.068 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Single Modular |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application rOWZqDAZL+oUA/JR+CnDsg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MAXID Corp. 4445 Corporation Lane 2nd floor Virginia Beach, VA 23462 United States |
Date of Grant: 09/27/2011 Application Dated: 09/27/2011 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT533ANM |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wi-Fi Link 5300 Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.07 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.13 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.063 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.068 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Single Modular |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 10/19/2011 Application Dated: 10/19/2011 |
| MAXID Corp. |
| 4445 Corporation Lane |
| 2nd floor |
| Virginia Beach, VA 23462 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT533ANM |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wi-Fi Link 5300 Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.11 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.11 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.045 | ||
| CC MO | 15E | 5270.0 - 5310.0 | 0.087 | ||
| CC MO | 15E | 5510.0 - 5670.0 | 0.081 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. Single Modular Class II Change to address co-location with FCC ID: TFTWT12 and FCC ID: TFT-MC8795 inside portable host TFT-IDL750 as described in this filing. The highest reported SAR is 0.269 W/kg; the highest summation of 1-g SAR is 0.728 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application fnQB0bHDdAWA3ThjDBwBGQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MAXID Corp. 4445 Corporation Lane 2nd floor Virginia Beach, VA 23462 United States |
Date of Grant: 10/19/2011 Application Dated: 10/19/2011 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT533ANM |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wi-Fi Link 5300 Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.11 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.11 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.045 | ||
| CC MO | 15E | 5270.0 - 5310.0 | 0.087 | ||
| CC MO | 15E | 5510.0 - 5670.0 | 0.081 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. Single Modular Class II Change to address co-location with FCC ID: TFTWT12 and FCC ID: TFT-MC8795 inside portable host TFT-IDL750 as described in this filing. The highest reported SAR is 0.269 W/kg; the highest summation of 1-g SAR is 0.728 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 10/19/2011 Application Dated: 10/19/2011 |
| MAXID Corp. |
| 4445 Corporation Lane |
| 2nd floor |
| Virginia Beach, VA 23462 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT533ANM |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wi-Fi Link 5300 Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.07 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.13 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.063 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.068 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Single Modular Class II Change to address co-location with FCC ID: TFTWT12 and FCC ID: TFT-MC8795 inside portable host TFT-IDL750 as described in this filing. The highest reported SAR is 0.237 W/kg; the highest summation of 1-g SAR is 0.728 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application e1hMHeFgtCwruT7eOTu2gQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MAXID Corp. 4445 Corporation Lane 2nd floor Virginia Beach, VA 23462 United States |
Date of Grant: 10/19/2011 Application Dated: 10/19/2011 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT533ANM |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wi-Fi Link 5300 Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.07 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.13 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.063 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.068 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. Single Modular Class II Change to address co-location with FCC ID: TFTWT12 and FCC ID: TFT-MC8795 inside portable host TFT-IDL750 as described in this filing. The highest reported SAR is 0.237 W/kg; the highest summation of 1-g SAR is 0.728 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 09/27/2011 Application Dated: 09/27/2011 |
| MAXID Corp. |
| 4445 Corporation Lane |
| 2nd floor |
| Virginia Beach, VA 23462 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT533ANM |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Wi-Fi Link 5300 Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 7jRz6dioAgglCZuAUwoF5g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MAXID Corp. 4445 Corporation Lane 2nd floor Virginia Beach, VA 23462 United States |
Date of Grant: 09/27/2011 Application Dated: 09/27/2011 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT533ANM |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Wi-Fi Link 5300 Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 09/27/2011 Application Dated: 09/27/2011 |
| MAXID Corp. |
| 4445 Corporation Lane |
| 2nd floor |
| Virginia Beach, VA 23462 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT533ANM |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wi-Fi Link 5300 Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.11 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.11 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.045 | ||
| CC MO | 15E | 5270.0 - 5310.0 | 0.087 | ||
| CC MO | 15E | 5510.0 - 5670.0 | 0.081 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. Single Modular |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 2kQZDEzoKX/T4fSfB7GfPA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MAXID Corp. 4445 Corporation Lane 2nd floor Virginia Beach, VA 23462 United States |
Date of Grant: 09/27/2011 Application Dated: 09/27/2011 |
| Attention: Steve Bowen , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TFT533ANM |
| Name of Grantee: | MAXID Corp. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wi-Fi Link 5300 Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.045 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.11 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.11 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.045 | ||
| CC MO | 15E | 5270.0 - 5310.0 | 0.087 | ||
| CC MO | 15E | 5510.0 - 5670.0 | 0.081 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 3x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. Single Modular |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |