FCC ID TGUDX80

Automated Meter Reading Transceiver Module

by Sensonix, Inc.

Grantee Code: TGU   Product Code: DX80
Latest application date: 2009-07-28

FCC ID Device Details

FCC IDTGUDX80
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeTGU
Product CodeDX80
Applicant BusinessSensonix, Inc. 🇺🇸
Related Domains sensonix.com
Equipment ClassAutomated Meter Reading Transceiver Module
Test FirmNemko Dallas, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.4-927.6 MHzClass II permissive change or modification of presently authorized equipment2009-07-28
902.5-927.5 MHzClass II permissive change or modification of presently authorized equipment2009-01-16
902.5-927.5 MHzClass II permissive change or modification of presently authorized equipment2007-01-16
902.5-927.5 MHzOriginal Equipment2005-08-09

Exhibits

DocumentTypeAvailableFile
Appendix to manualUsers Manual2005-08-09PDF 78.9 KB
Users manualUsers Manual2005-08-09PDF 1.2 MB
internal photosInternal Photos2009-01-16PDF 1.5 MB
Internal photosInternal Photos2005-08-09PDF 2.2 MB
External photosExternal Photos2005-08-09PDF 137.4 KB
Label formatID Label/Location Info2005-08-09PDF 476.3 KB
Label locationID Label/Location Info2005-08-09PDF 1.1 MB
Antenna 1Operational Description2007-01-16PDF 428.6 KB
Antenna 2Operational Description2007-01-16PDF 1.1 MB
Antenna 3Operational Description2007-01-16PDF 88.7 KB
test setup photosTest Setup Photos2009-01-16PDF 2.8 MB
Setup photosTest Setup Photos2007-01-16PDF 400.1 KB
Test setup photosTest Setup Photos2005-08-09PDF 546 KB
Test ReportTest Report2009-07-28PDF 231.7 KB
test reportTest Report2009-01-16PDF 294.3 KB
Test reportTest Report2007-01-16PDF 512.5 KB
Test reportTest Report2005-08-09PDF 311.8 KB
Authority to act as agentAttestation Statements2005-08-09PDF 58.5 KB
Cover LettersCover Letter(s)2009-07-28PDF 29 KB
agent letterCover Letter(s)2009-01-16PDF 20.5 KB
changes letterCover Letter(s)2009-01-16PDF 70.7 KB
confidential letterCover Letter(s)2009-01-16PDF 15.3 KB
Authority letterCover Letter(s)2007-01-16PDF 134.6 KB
Class II Permissive Changes LetterCover Letter(s)2007-01-16PDF 141.2 KB
Confidentiality requestCover Letter(s)2005-08-09PDF 56.8 KB
Modular approval letterCover Letter(s)2005-08-09PDF 270.1 KB
rf exposure evaluationRF Exposure Info2009-01-16PDF 24.4 KB
MPERF Exposure Info2007-01-16PDF 24.7 KB
MPE CalculationRF Exposure Info2005-08-09PDF 10.7 KB
Block diagram Metadata onlyBlock DiagramPDF 100.3 KB
Schematics Metadata onlySchematicsPDF 540.3 KB
Technical description Metadata onlyOperational DescriptionPDF 626.2 KB

Application Information

Application IDbpuqhMAtiG0POzxxue7R7w==
Final Action Date2009-07-28
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0013728720
ModelDX80
Frequency Range902.4-927.6 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionAutomated Meter Reading Transceiver Module
Responsible PartyMark R. Rue, Engineering Manager Wireless Products, mrue@sensonix.com , 763-637-1149
AgentMichelle Michelle Michelle, Nemko USA, Inc., Michelle.furrow@nemko.com , 972-436-9600
Technical ContactBrent Holm, Sensonix, Inc., bholm@sensonix.com , 63-519-7042
Non-Technical ContactBrent Holm, Sensonix, Inc., bholm@sensonix.com , 763-519-7042
Test FirmMike Cantwell, Nemko Dallas, Inc., mike.cantwell@nemko.com , 972-436-9600
TCB EmailStuart.Beck@nemko.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited single modular approval. Power output is conducted. This device must be installed only by the grantee in their final products with the antennas listed in this filing. This device must not be co-located or operating in conjunction with any other antenna or transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End user and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
bpuqhMAtiG0POzxxue7R7w==2009-07-28Class II permissive change or modification of presently authorized equipment
lBnR0LjbwaFZM1hEFIgOaQ==2009-01-16Class II permissive change or modification of presently authorized equipment
EZjo9ODXwjpbkQIYqxT0mA==2007-01-16Class II permissive change or modification of presently authorized equipment
e0HMpYhywJ7DkyZQrtLouA==2005-08-09Original Equipment

Equipment Authorization

FrequencyOutputRules
902.4-927.6 MHz0.100000015C
902.5-927.5 MHz0.100000015C

Grants

TCB Grant - Application lBnR0LjbwaFZM1hEFIgOaQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko Canada Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 01/16/2009

Application Dated: 01/16/2009
Sensonix, Inc.
15755 32nd Ave. North
Plymouth, MN 55447
 
Attention: Mark Rue , Engineering Manager Wireless Products

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TGUDX80
Name of Grantee:  Sensonix, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Automated Meter Reading Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.5  -  927.5 0.1  

Limited single modular approval. Power output is conducted. This device must be installed only by the grantee in their final products with the antennas listed in this filing. This device must not be co-located or operating in conjunction with any other antenna or transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End user and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application lBnR0LjbwaFZM1hEFIgOaQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sensonix, Inc.
15755 32nd Ave. North
Plymouth, MN 55447
United States
  Date of Grant: 01/16/2009

Application Dated: 01/16/2009
 
Attention: Mark Rue , Engineering Manager Wireless Products

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TGUDX80
Name of Grantee:  Sensonix, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Automated Meter Reading Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.5  -  927.5 0.1  

Limited single modular approval. Power output is conducted. This device must be installed only by the grantee in their final products with the antennas listed in this filing. This device must not be co-located or operating in conjunction with any other antenna or transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End user and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application EZjo9ODXwjpbkQIYqxT0mA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko Canada Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 01/16/2007

Application Dated: 01/16/2007
Sensonix, Inc.
15755 32nd Ave. North
Plymouth, MN 55447
 
Attention: Mark Rue , Engineering Manager Wireless Products

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TGUDX80
Name of Grantee:  Sensonix, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Automated Meter Reading Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.5  -  927.5 0.1  

Limited Modular Approval. Power output is conducted. This device must be installed only by the grantee in their final products with the antennas listed in this filing. This device must not be co-located or operating in conjunction with any other antenna or transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End user and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application EZjo9ODXwjpbkQIYqxT0mA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sensonix, Inc.
15755 32nd Ave. North
Plymouth, MN 55447
United States
  Date of Grant: 01/16/2007

Application Dated: 01/16/2007
 
Attention: Mark Rue , Engineering Manager Wireless Products

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TGUDX80
Name of Grantee:  Sensonix, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Automated Meter Reading Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.5  -  927.5 0.1  

Limited Modular Approval. Power output is conducted. This device must be installed only by the grantee in their final products with the antennas listed in this filing. This device must not be co-located or operating in conjunction with any other antenna or transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End user and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To:


EA205887

TCB Grant - Application e0HMpYhywJ7DkyZQrtLouA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 08/09/2005

Application Dated: 08/09/2005
Sensonix, Inc.
15755 32nd Ave. North
Plymouth, MN 55447
 
Attention: Mark Rue , Engineering Manager Wireless Products

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TGUDX80
Name of Grantee:  Sensonix, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Automated Meter Reading Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.5  -  927.5 0.1  

Limited Modular Approval.

Power output is conducted. This device must be installed only by the grantee in their final products with the antennas listed in this filing. This device must not be co-located or operating in conjunction with any other antenna or transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End user and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


EAS Grant - Application e0HMpYhywJ7DkyZQrtLouA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sensonix, Inc.
15755 32nd Ave. North
Plymouth, MN 55447
United States
  Date of Grant: 08/09/2005

Application Dated: 08/09/2005
 
Attention: Mark Rue , Engineering Manager Wireless Products

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TGUDX80
Name of Grantee:  Sensonix, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Automated Meter Reading Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.5  -  927.5 0.1  

Limited Modular Approval.

Power output is conducted. This device must be installed only by the grantee in their final products with the antennas listed in this filing. This device must not be co-located or operating in conjunction with any other antenna or transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End user and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application bpuqhMAtiG0POzxxue7R7w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko Canada Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 07/28/2009

Application Dated: 07/27/2009
Sensonix, Inc.
15755 32nd Ave. North
Plymouth, MN 55447
 
Attention: Mark Rue , Engineering Manager Wireless Products

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TGUDX80
Name of Grantee:  Sensonix, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Automated Meter Reading Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.4  -  927.6 0.1  

Limited single modular approval. Power output is conducted. This device must be installed only by the grantee in their final products with the antennas listed in this filing. This device must not be co-located or operating in conjunction with any other antenna or transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End user and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application bpuqhMAtiG0POzxxue7R7w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sensonix, Inc.
15755 32nd Ave. North
Plymouth, MN 55447
United States
  Date of Grant: 07/28/2009

Application Dated: 07/27/2009
 
Attention: Mark Rue , Engineering Manager Wireless Products

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TGUDX80
Name of Grantee:  Sensonix, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Automated Meter Reading Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.4  -  927.6 0.1  

Limited single modular approval. Power output is conducted. This device must be installed only by the grantee in their final products with the antennas listed in this filing. This device must not be co-located or operating in conjunction with any other antenna or transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End user and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: