FCC ID TIGR5000-O-49

TIG-R5000-O-49, TIG R5000O49, TIGR5000-0-49, TIGR5OOO-O-49, TIGR5000-O-49, TIGRS000-O-49, T1GR5000-O-49

Continental Wireless, Inc. Broadband Wireless Router R5000-O-49

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: TIGR5000-O-49 is TIG. The remaining characters of the FCC ID, R5000-O-49, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: Broadband Wireless Router

Application: Broadband Wireless Router
Equipment Class: TNB - Licensed Non-Broadcast Station Transmitter
Short Link: fcc.id/TIGR5000-O-49
Sources: FCC.gov | FCC.report
Registered By: Continental Wireless, Inc. - TIG (United States)

App #	Purpose	Date	Unique ID
1	Original Equipment	2005-09-20	hwy5Kr13OgG0wNN12FX2nw==

Operating Frequencies

Frequency Range	Power Output	Tolerance	Emission Designator	Rule Parts	Line Entry
4.95-4.98 GHz	7 mW	17300.0000000000Hz	20M0G7D	90	1

Exhibits

Document	Type	Submitted Available
Users Manual	Users Manual Adobe Acrobat PDF (1454 kB)	2005-09-20 2005-09-20
Test Setup Photographs	Test Setup Photos Adobe Acrobat PDF (530 kB)	2005-09-20 2005-09-20
MPE Calculation	Operational Description Adobe Acrobat PDF (33 kB)	2005-09-20 2005-09-20
Label Information	ID Label/Location Info Adobe Acrobat PDF (386 kB)	2005-09-20 2005-09-20
Tuning Procedure	Parts List/Tune Up Info Adobe Acrobat PDF (16 kB)	2005-09-20 2005-09-20
External Photographs	External Photos Adobe Acrobat PDF (770 kB)	2005-09-20 2005-09-20
Test Report	Test Report Adobe Acrobat PDF (1040 kB)	2005-09-20 2005-09-20
Confidentiality Letter	Cover Letter(s) Adobe Acrobat PDF (16 kB)	2005-09-20 2005-09-20
Agent Authorization Letter	Cover Letter(s) Adobe Acrobat PDF (18 kB)	2005-09-20 2005-09-20
Block Diagram of RF Card	Block Diagram Adobe Acrobat PDF (26 kB)	2005-09-20
R5000 Bill of Materials	Parts List/Tune Up Info Adobe Acrobat PDF (23 kB)	2005-09-20
R5000 Schematics 2	Schematics Adobe Acrobat PDF (1045 kB)	2005-09-20
Internal Photographs	Internal Photos Adobe Acrobat PDF (2308 kB)	2005-09-20
Block Diagram	Block Diagram Adobe Acrobat PDF (158 kB)	2005-09-20
Operational Description	Operational Description Adobe Acrobat PDF (20 kB)	2005-09-20
CardBus Bill Of Materials	Parts List/Tune Up Info Adobe Acrobat PDF (17 kB)	2005-09-20
R5000 Schematics	Schematics Adobe Acrobat PDF (81 kB)	2005-09-20
Internal Photographs CardBuse	Internal Photos Adobe Acrobat PDF (59 kB)	2005-09-20

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version

Applicant Information

Applicant's complete, legal business name:	Continental Wireless, Inc.
FCC Registration Number (FRN):	0013802830
Alphanumeric FCC ID:	TIGR5000O49
Unique Application Identifier:	hwy5Kr13OgG0wNN12FX2nw==
Line one:	2355 Merritt Drive
Line two:	Suite #200
City:	arland
State:	Texas
Country:	United States
Zip Code:	75041

TCB Information

TCB Application Email Address:	tcbinfo@metlabs.com
TCB Scope:	B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97

FCC ID

Grantee Code:	TIG
Product Code:	R5000-O-49

Person at the applicant's address to receive grant or for contact

Name:	Gary Weber
Title:	Chief Technical Officer

Telephone Number:

972.926.7443

Extension:

Fax Number:	972.926.0624
Email:	Gary.Weber@CntlWire.com

Long-Term Confidentiality

Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes

Short-Term Confidentiality

Does short-term confidentiality apply to this application?: No

If so, specify the short-term confidentiality release date (MM/DD/YYYY format):
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio

Is this application for software defined/cognitive radio authorization? No

Equipment Class

Equipment Class: TNB - Licensed Non-Broadcast Station Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant):	Broadband Wireless Router

Related OET KnowledgeDataBase Inquiry

Is there a KDB inquiry associated with this application? No

Modular Equipment

Modular Type: Does not apply

Application Purpose

Application is for: Original Equipment

Composite/Related Equipment

Is the equipment in this application a composite device subject to an additional equipment authorization? No

Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? No

Test Firm Information

Name of test firm and contact person on file with the FCC:

Firm Name: MET Laboratories, Inc.

First Name: Robert

Last Name: Frier

Telephone Number:

4087483585

Extension:

Fax Number: 5104896372

E-mail: rfrier@metlabs.com

Grant Comments

Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power Output Listed is RMS Conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 1 meter from all persons during normal operation. Operation is for use in the 4.9 GHz licensed band for point to point or point to multi point operation. The maximum antenna gain must not exceed 26dBi. This device must not be co-located or operating in conjunction with any other antenna or transmitter. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of section 1.1307(b)(3). End Users and Installers must be provided with antenna installation instructions and transmitter operation conditions for satisfying RF exposure compliance.

Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver

Is there an equipment authorization waiver associated with this application? No

If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?: No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify? Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing: MArie Ann Confroy

Title of authorized signature: TCB Administrator

Grants

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

MET Laboratories, Inc.
914 W. Patapsco Avenue
Baltimore, MD 21230-3432

Date of Grant: 09/20/2005

Application Dated: 09/20/2005

Continental Wireless, Inc.

2355 Merritt Drive

Suite #200

arland, TX 75041

Attention: Gary Weber , Chief Technical Officer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TIGR5000-O-49

Name of Grantee:	Continental Wireless, Inc.

Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	Broadband Wireless Router

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	4950.0 - 4980.0	0.007	17300.0 Hz	20M0G7D

Power Output Listed is RMS Conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 1 meter from all persons during normal operation. Operation is for use in the 4.9 GHz licensed band for point to point or point to multi point operation. The maximum antenna gain must not exceed 26dBi. This device must not be co-located or operating in conjunction with any other antenna or transmitter. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of section 1.1307(b)(3). End Users and Installers must be provided with antenna installation instructions and transmitter operation conditions for satisfying RF exposure compliance.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Continental Wireless, Inc.
2355 Merritt Drive Suite #200
arland, TX 75041
United States