FCC ID TK4WL7002E56

WiFi 7 (802.11be) 2x2 Dual Band Dual Concurrent Wireless Module

by Compex Systems Pte Ltd

Grantee Code: TK4   Product Code: WL7002E56
Latest application date: 2025-02-19

FCC ID Device Details

FCC IDTK4WL7002E56
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeTK4
Product CodeWL7002E56
Applicant BusinessCompex Systems Pte Ltd 🇸🇬
Related Domains compex.com.sg
Equipment ClassWiFi 7 (802.11be) 2x2 Dual Band Dual Concurrent Wireless Module
Test FirmDEKRA Testing and Certification (Suzhou) Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5955-6415 MHzOriginal Equipment2025-02-19
5955-6415 MHzOriginal Equipment2025-02-19
5180-5240 MHzOriginal Equipment2025-02-19
5955-6415 MHzOriginal Equipment2025-02-19

Exhibits

DocumentTypeAvailableFile
User Manual Model 1Users Manual2025-08-18PDF 1.5 MB
User Manual Model 2Users Manual2025-08-18PDF 1.2 MB
User Manual Model 3Users Manual2025-08-18PDF 1.2 MB
Users Manual 1Users Manual2025-08-18PDF 1.5 MB
Users Manual 2Users Manual2025-08-18PDF 1.2 MB
Users Manual 3Users Manual2025-08-18PDF 1.2 MB
Users Manual Model 1Users Manual2025-08-18PDF 1.5 MB
Users Manual Model 2Users Manual2025-08-18PDF 1.2 MB
Users Manual Model 3Users Manual2025-08-18PDF 1.2 MB
Internal PhotosInternal Photos2025-08-18PDF 2 MB
External PhotosExternal Photos2025-08-18PDF 2 MB
LabelID Label/Location Info2025-02-19PDF 176.5 KB
Label LocationID Label/Location Info2025-02-19PDF 30.5 KB
Test Setup PhotosTest Setup Photos2025-08-18PDF 1,013.3 KB
Test Setup photosTest Setup Photos2025-08-18PDF 1,013.3 KB
Antenna Specification 1Test Report2025-02-19PDF 214 KB
Antenna Specification 10Test Report2025-02-19PDF 871.7 KB
Antenna Specification 11Test Report2025-02-19PDF 1.1 MB
Antenna Specification 12Test Report2025-02-19PDF 2.2 MB
Antenna Specification 2Test Report2025-02-19PDF 2.1 MB
Antenna Specification 3Test Report2025-02-19PDF 2.1 MB
Antenna Specification 4Test Report2025-02-19PDF 1.4 MB
Antenna Specification 4Test Report2025-02-19PDF 1.9 MB
Antenna Specification 5Test Report2025-02-19PDF 1.5 MB
Antenna Specification 5Test Report2025-02-19PDF 1.9 MB
Antenna Specification 6Test Report2025-02-19PDF 1.4 MB
Antenna Specification 7Test Report2025-02-19PDF 963.2 KB
Antenna Specification 8Test Report2025-02-19PDF 1.5 MB
Antenna Specification 9Test Report2025-02-19PDF 963.5 KB
Test Report DFS Part 1Test Report2025-02-19PDF 4.3 MB
Test Report DFS Part 2Test Report2025-02-19PDF 821.4 KB
Test Report Part 1Test Report2025-02-19PDF 5.4 MB
Test Report Part 1Test Report2025-02-19PDF 5.5 MB
Test Report Part 1Test Report2025-02-19PDF 5.4 MB
Test Report Part 2Test Report2025-02-19PDF 5.4 MB
Test Report Part 2Test Report2025-02-19PDF 5.4 MB
Test Report Part 2Test Report2025-02-19PDF 5.4 MB
Test Report Part 3Test Report2025-02-19PDF 5.5 MB
Test Report Part 3Test Report2025-02-19PDF 5.5 MB
Test Report Part 3Test Report2025-02-19PDF 5.5 MB
Test Report Part 4Test Report2025-02-19PDF 5.4 MB
Test Report Part 4Test Report2025-02-19PDF 5.4 MB
Test Report Part 4Test Report2025-02-19PDF 5.4 MB
Test Report Part 5Test Report2025-02-19PDF 5.5 MB
Test Report Part 5Test Report2025-02-19PDF 5.5 MB
Test Report Part 5Test Report2025-02-19PDF 5.5 MB
Test Report Part 6Test Report2025-02-19PDF 4.6 MB
Test Report Part 6Test Report2025-02-19PDF 5.5 MB
Test Report Part 6Test Report2025-02-19PDF 4.2 MB
Test Report Part 7Test Report2025-02-19PDF 5.5 MB
Test Report Part 8Test Report2025-02-19PDF 4.3 MB
Software Security InformationCover Letter(s)2025-02-19PDF 167.2 KB
Covered Equipment AttestationAttestation Statements2025-02-19PDF 313.6 KB
Device Security AttestationAttestation Statements2025-02-19PDF 140.7 KB
U.S. Agent Designation AttestationAttestation Statements2025-02-19PDF 420.8 KB
Confidentiality LetterCover Letter(s)2025-02-19PDF 315.2 KB
Model Difference LetterCover Letter(s)2025-02-19PDF 2.4 MB
Modular Approval LetterCover Letter(s)2025-02-19PDF 478.4 KB
RF Exposure EvaluationRF Exposure Info2025-02-19PDF 595.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 106.7 KB
Schematics Metadata onlySchematicsPDF 4.3 MB
Operational Description Metadata onlyOperational DescriptionPDF 351.4 KB

Application Information

Application IDmc5TihgJ7pGby8aqzo6y/A==
Final Action Date2025-02-19
Application PurposeOriginal Equipment
Applicant FRN0013908165
ModelWL7002E56
Frequency Range5955-6415 MHz
Equipment Class6XD - 15E 6 GHz Low Power Indoor Client
Device DescriptionWiFi 7 (802.11be) 2x2 Dual Band Dual Concurrent Wireless Module
Responsible PartyJune Ng, R&D; Software Manager, june_ng@compex.com.sg , (65)62862086
Test FirmJanet Xu, DEKRA Testing and Certification (Suzhou) Co., Ltd., janet.xu@dekra.com , 86-512-6251-50885113
TCB EmailTCB@nemko.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date08/18/2025
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval for Mobile RF exposure conditions. Output Power listed is maximum EIRP. This device supports 20, 40, 80, 160 and 320 MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Applications

Application IDDatePurpose
mc5TihgJ7pGby8aqzo6y/A==2025-02-19Original Equipment
L8rnwcA8zejNd1llFfHH1w==2025-02-19Original Equipment
G5xnpEog/lWEWTO2ZAnUmQ==2025-02-19Original Equipment
21Rm80x9RD7UTnzvtK4/dg==2025-02-19Original Equipment

Equipment Authorization

FrequencyOutputGrant Notes
5180-5240 MHz0.091MO
5260-5320 MHz0.094MO, ND
5500-5720 MHz0.091MO, ND
5745-5825 MHz0.107MO
5955-6415 MHz0.096EP, MO
5955-6415 MHz0.211EP, MO
6435-6515 MHz0.105EP, MO
6435-6515 MHz0.205EP, MO
6535-6875 MHz0.107EP, MO
6535-6875 MHz0.211EP, MO
6895-7115 MHz0.103EP, MO
6895-7115 MHz0.198EP, MO

Grants

TCB Grant - Application mc5TihgJ7pGby8aqzo6y/A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 02/19/2025

Application Dated: 02/19/2025
Compex Systems Pte Ltd
178 Paya Lebar Road
#05-05
Singapore, 409030
Singapore
 
Attention: June Ng , Certificate compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TK4WL7002E56
Name of Grantee:  Compex Systems Pte Ltd
Equipment Class: 15E 6 GHz Low Power Indoor Client
Notes: WiFi 7 (802.11be) 2x2 Dual Band Dual Concurrent Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EP MO 15E 5955.0  -  6415.0 0.096  
EP MO 15E 6435.0  -  6515.0 0.105  
EP MO 15E 6535.0  -  6875.0 0.107  
EP MO 15E 6895.0  -  7115.0 0.103  

Single Modular Approval for Mobile RF exposure conditions. Output Power listed is maximum EIRP. This device supports 20, 40, 80, 160 and 320 MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application L8rnwcA8zejNd1llFfHH1w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 02/19/2025

Application Dated: 02/19/2025
Compex Systems Pte Ltd
178 Paya Lebar Road
#05-05
Singapore, 409030
Singapore
 
Attention: June Ng , Certificate compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TK4WL7002E56
Name of Grantee:  Compex Systems Pte Ltd
Equipment Class: 15E 6 GHz Low Power Indoor Access Point
Notes: WiFi 7 (802.11be) 2x2 Dual Band Dual Concurrent Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EP MO 15E 5955.0  -  6415.0 0.211  
EP MO 15E 6435.0  -  6515.0 0.205  
EP MO 15E 6535.0  -  6875.0 0.211  
EP MO 15E 6895.0  -  7115.0 0.198  

Single Modular Approval for Mobile RF exposure conditions. Output Power listed is maximum EIRP. This device supports 20, 40, 80, 160 and 320 MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application G5xnpEog/lWEWTO2ZAnUmQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 02/19/2025

Application Dated: 02/19/2025
Compex Systems Pte Ltd
178 Paya Lebar Road
#05-05
Singapore, 409030
Singapore
 
Attention: June Ng , Certificate compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TK4WL7002E56
Name of Grantee:  Compex Systems Pte Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi 7 (802.11be) 2x2 Dual Band Dual Concurrent Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15E 5180.0  -  5240.0 0.091  
MO ND 15E 5260.0  -  5320.0 0.094  
MO ND 15E 5500.0  -  5720.0 0.091  
MO 15E 5745.0  -  5825.0 0.107  

Single Modular Approval for Mobile RF exposure conditions. Output power listed is conducted. This device supports 20, 40, 80 and 160 MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 21Rm80x9RD7UTnzvtK4/dg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 02/19/2025

Application Dated: 02/19/2025
Compex Systems Pte Ltd
178 Paya Lebar Road
#05-05
Singapore, 409030
Singapore
 
Attention: June Ng , Certificate compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TK4WL7002E56
Name of Grantee:  Compex Systems Pte Ltd
Equipment Class: 15E 6 GHz Low Power Dual Client
Notes: WiFi 7 (802.11be) 2x2 Dual Band Dual Concurrent Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EP MO 15E 5955.0  -  6415.0 0.096  
EP MO 15E 6435.0  -  6515.0 0.105  
EP MO 15E 6535.0  -  6875.0 0.107  
EP MO 15E 6895.0  -  7115.0 0.103  

Single Modular Approval for Mobile RF exposure conditions. Output Power listed is maximum EIRP. This device supports 20, 40, 80, 160 and 320 MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.