FCC ID TK4WPJ428

Wireless Access Point

by Compex Systems Pte Ltd

Grantee Code: TK4   Product Code: WPJ428
Latest application date: 2017-09-11

FCC ID Device Details

FCC IDTK4WPJ428
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeTK4
Product CodeWPJ428
Applicant BusinessCompex Systems Pte Ltd 🇸🇬
Related Domains compex.com.sg mrt-cert.com
Equipment ClassWireless Access Point
Test FirmMRT Technology (Suzhou) Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2017-09-11
5180-5240 MHzOriginal Equipment2017-07-20
2412-2462 MHzOriginal Equipment2017-07-20

Exhibits

DocumentTypeAvailableFile
WPJ428-User Manual Metadata onlyUsers Manual2017-09-11PDF 2.7 MB
WPJ428_User Manual rev1Users Manual2017-09-11PDF 2.7 MB
WPJ428-User Manual v2 2017-07-18Users Manual2017-07-20PDF 2.4 MB
1704RSU002-Internal PhotoInternal Photos2017-09-11PDF 132.9 KB
1704RSU002-External PhotoExternal Photos2017-09-11PDF 1 MB
1704RSU002-External PhotoExternal Photos2017-07-20PDF 1.2 MB
WPJ428_Label Location and LabelID Label/Location Info2017-09-11PDF 297.6 KB
1704RSU002_Test Setup PhotoTest Setup Photos2017-09-11PDF 565.2 KB
1704RSU002_Test Setup PhotoTest Setup Photos2017-07-20PDF 550.6 KB
1704RSU00205-FCC-UNII Test Report_Part1 Metadata onlyTest Report2017-09-11PDF 4.9 MB
1704RSU00205-FCC-UNII Test Report_Part2 Metadata onlyTest Report2017-09-11PDF 4.8 MB
1704RSU00205-FCC-UNII Test Report_Part3 Metadata onlyTest Report2017-09-11PDF 5 MB
1704RSU00205-FCC-UNII Test Report_Part4 Metadata onlyTest Report2017-09-11PDF 4.5 MB
1704RSU00206-FCC-DFS Test Report Part1Test Report2017-09-11PDF 2 MB
1704RSU00206-FCC-DFS Test Report Part2Test Report2017-09-11PDF 1.4 MB
1704rsu00205-fcc-unii test report-Part1Test Report2017-09-11PDF 5 MB
1704rsu00205-fcc-unii test report-Part2Test Report2017-09-11PDF 5.2 MB
1704rsu00205-fcc-unii test report-Part3Test Report2017-09-11PDF 5.3 MB
1704rsu00205-fcc-unii test report-Part4Test Report2017-09-11PDF 3.7 MB
1704RSU00201-FCC-DTS Test Report Part1Test Report2017-07-20PDF 5.4 MB
1704RSU00201-FCC-DTS Test Report Part2Test Report2017-07-20PDF 4.9 MB
1704RSU00202-FCC-UNII Test Report Part1Test Report2017-07-20PDF 5.5 MB
1704RSU00202-FCC-UNII Test Report Part2Test Report2017-07-20PDF 5.6 MB
1704RSU00202-FCC-UNII Test Report Part3Test Report2017-07-20PDF 4.4 MB
1704RSU00203-Co-location Test ReportTest Report2017-07-20PDF 280.7 KB
WPJ428_Attestation_signedCover Letter(s)2017-07-20PDF 272.1 KB
WPJ428_FCC 15B Attestation_signedCover Letter(s)2017-07-20PDF 246.5 KB
WPJ428_ACB-Authority LettersCover Letter(s)2017-09-11PDF 180 KB
WPJ428_ACB-Confidentiality LettersCover Letter(s)2017-09-11PDF 180 KB
WPJ428_C2PC Statement LetterCover Letter(s)2017-09-11PDF 23.5 KB
WPJ428_Model Declaration LetterCover Letter(s)2017-09-11PDF 146.1 KB
WPJ428_SDR Cover LetterCover Letter(s)2017-09-11PDF 12 KB
WPJ428_ACB-Form-FCC-Authority Letters_signedCover Letter(s)2017-07-20PDF 822.1 KB
WPJ428_ACB-Form-FCC-Confidential Letters_signedCover Letter(s)2017-07-20PDF 822.1 KB
WPJ428_Model Declaration LetterCover Letter(s)2017-07-20PDF 146.2 KB
WPJ428_Model Declaration Letter - v1Cover Letter(s)2017-07-20PDF 146.2 KB
WPJ428_SDR Cover Letter_signedCover Letter(s)2017-07-20PDF 502.6 KB
1704RSU00207-RF Exposure ReportRF Exposure Info2017-09-11PDF 172.8 KB
1704RSU00204-RF Exposure ReportRF Exposure Info2017-07-20PDF 207.5 KB
Confidential_WPJ428_Block diagram Metadata onlyBlock DiagramPDF 41.2 KB
Confidential_WPJ428-Schematic Metadata onlySchematicsPDF 209.8 KB
Confidential_WPJ428_Operation Description Metadata onlyOperational DescriptionPDF 490.8 KB
Confidential_WPJ428_Operation Description - 2017-07-18 Metadata onlyOperational DescriptionPDF 576.2 KB
Confidential_WPJ428_Operation Description rev1 Metadata onlyOperational DescriptionPDF 490.5 KB
Panel 1 SPEC Metadata onlyOperational DescriptionPDF 326.8 KB
Panel 2 SPEC Metadata onlyOperational DescriptionPDF 657 KB
WPJ428_Antenna SPEC Metadata onlyOperational DescriptionPDF 528.5 KB

Application Information

Application ID5dIiPI5GS7M0n31MzO8sfg==
Final Action Date2017-09-11
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0013908165
ModelWPJ428
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWireless Access Point
Responsible PartyYaw Thiam Teng, R&D; Software Manager, tt_yaw@compex.com.sg , (65)62862086
AgentRobin Robin Robin, MRT Technology (Suzhou) Co., Ltd, robinwu@mrt-cert.com , 86-512-66308358
Technical ContactRobin Wu, MRT Technology (Suzhou) Co., Ltd, robinwu@mrt-cert.com , 86-512-66308358
Non-Technical ContactRobin Wu, MRT Technology (Suzhou) Co., Ltd, robinwu@mrt-cert.com , 86-512-66308358
Test FirmMr. Marlin Chen, MRT Technology (Suzhou) Co., Ltd., marlinchen@mrt-cert.com , +86-512-66308358
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsClass II Permissive Change to add UNII Band 2-A and 2-C. Power Output listed is conducted. Device is an 802.11a/n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This point-to-point application is subject to the professional installation instruction requirements. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Antenna Installation - The antennas used for this transmitter must be installed to provide a separation distance of at least 70 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter not described in this application. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode.

Applications

Application IDDatePurpose
5dIiPI5GS7M0n31MzO8sfg==2017-09-11Class II permissive change or modification of presently authorized equipment
Ni0zS+fcDQ8hLHJRMzkprA==2017-07-20Original Equipment
8XTMLLnxsh1SMOd9f9zozg==2017-07-20Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.196800015CCC, MO
5180-5240 MHz0.030815E38, CC, MO
5260-5320 MHz0.088715E38, CC, MO, ND
5500-5720 MHz0.089515E38, CC, MO, ND
5745-5825 MHz0.085515E38, CC, MO

Grants

TCB Grant - Application Ni0zS+fcDQ8hLHJRMzkprA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 07/20/2017

Application Dated: 07/18/2017
Compex Systems Pte Ltd
No 9 Harrison Road, Harrison Industrial Building
#05-01
Singapore, 369651
Singapore
 
Attention: Yaw Thiam Teng , R&D Software Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TK4WPJ428
Name of Grantee:  Compex Systems Pte Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.0308  
38 CC MO 15E 5745.0  -  5825.0 0.0855  

Power Output listed is conducted. Device is an 802.11a/n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This point-to-point application is subject to the professional installation instruction requirements. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Antenna Installation - The antennas used for this transmitter must be installed to provide a separation distance of at least 70 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter not described in this application.

This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Ni0zS+fcDQ8hLHJRMzkprA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Compex Systems Pte Ltd
No 9 Harrison Road, Harrison Industrial Building #05-01
Singapore, 369651
Singapore
  Date of Grant: 07/20/2017

Application Dated: 07/18/2017
 
Attention: Yaw Thiam Teng , R&D Software Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TK4WPJ428
Name of Grantee:  Compex Systems Pte Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.0308  
38 CC MO 15E 5745.0  -  5825.0 0.0855  

Power Output listed is conducted. Device is an 802.11a/n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This point-to-point application is subject to the professional installation instruction requirements. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Antenna Installation - The antennas used for this transmitter must be installed to provide a separation distance of at least 70 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter not described in this application.

This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 8XTMLLnxsh1SMOd9f9zozg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 07/20/2017

Application Dated: 07/18/2017
Compex Systems Pte Ltd
No 9 Harrison Road, Harrison Industrial Building
#05-01
Singapore, 369651
Singapore
 
Attention: Yaw Thiam Teng , R&D Software Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TK4WPJ428
Name of Grantee:  Compex Systems Pte Ltd
Equipment Class: Digital Transmission System
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.1968  

Power Output listed is conducted. Device is an 802.11b/g/n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This point-to-point application is subject to the professional installation instruction requirements. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Antenna Installation - The antennas used for this transmitter must be installed to provide a separation distance of at least 70 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter not described in this application.

This device has a 20 MHz and 40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 8XTMLLnxsh1SMOd9f9zozg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Compex Systems Pte Ltd
No 9 Harrison Road, Harrison Industrial Building #05-01
Singapore, 369651
Singapore
  Date of Grant: 07/20/2017

Application Dated: 07/18/2017
 
Attention: Yaw Thiam Teng , R&D Software Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TK4WPJ428
Name of Grantee:  Compex Systems Pte Ltd
Equipment Class: Digital Transmission System
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.1968  

Power Output listed is conducted. Device is an 802.11b/g/n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This point-to-point application is subject to the professional installation instruction requirements. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Antenna Installation - The antennas used for this transmitter must be installed to provide a separation distance of at least 70 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter not described in this application.

This device has a 20 MHz and 40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 5dIiPI5GS7M0n31MzO8sfg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 09/11/2017

Application Dated: 07/26/2017
Compex Systems Pte Ltd
No 9 Harrison Road, Harrison Industrial Building
#05-01
Singapore, 369651
Singapore
 
Attention: Yaw Thiam Teng , R&D Software Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TK4WPJ428
Name of Grantee:  Compex Systems Pte Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.0308  
38 CC MO ND 15E 5260.0  -  5320.0 0.0887  
38 CC MO ND 15E 5500.0  -  5720.0 0.0895  
38 CC MO 15E 5745.0  -  5825.0 0.0855  

Class II Permissive Change to add UNII Band 2-A and 2-C.

Power Output listed is conducted. Device is an 802.11a/n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This point-to-point application is subject to the professional installation instruction requirements. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Antenna Installation - The antennas used for this transmitter must be installed to provide a separation distance of at least 70 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter not described in this application.

This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application 5dIiPI5GS7M0n31MzO8sfg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Compex Systems Pte Ltd
No 9 Harrison Road, Harrison Industrial Building #05-01
Singapore, 369651
Singapore
  Date of Grant: 09/11/2017

Application Dated: 07/26/2017
 
Attention: Yaw Thiam Teng , R&D Software Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TK4WPJ428
Name of Grantee:  Compex Systems Pte Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.0308  
38 CC MO ND 15E 5260.0  -  5320.0 0.0887  
38 CC MO ND 15E 5500.0  -  5720.0 0.0895  
38 CC MO 15E 5745.0  -  5825.0 0.0855  

Class II Permissive Change to add UNII Band 2-A and 2-C.

Power Output listed is conducted. Device is an 802.11a/n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This point-to-point application is subject to the professional installation instruction requirements. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Antenna Installation - The antennas used for this transmitter must be installed to provide a separation distance of at least 70 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter not described in this application.

This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: