FS2-D Face Station2 Test Report Suprema Inc.

Suprema Inc. Face Station2

FCC ID Filing: TKWFS2-D
Purchase on Amazon: Face Station2

Trouble Viewing? See the or view the HTML Version or PDF in frame
Page 1 of FS2-D Face Station2 Test Report  Suprema Inc.
Page 2 of FS2-D Face Station2 Test Report  Suprema Inc.
Page 3 of FS2-D Face Station2 Test Report  Suprema Inc.
Page 4 of FS2-D Face Station2 Test Report  Suprema Inc.
Page 5 of FS2-D Face Station2 Test Report  Suprema Inc.
Page 6 of FS2-D Face Station2 Test Report  Suprema Inc.
Page 7 of FS2-D Face Station2 Test Report  Suprema Inc.
Page 8 of FS2-D Face Station2 Test Report  Suprema Inc.
Page 9 of FS2-D Face Station2 Test Report  Suprema Inc.
Page 10 of FS2-D Face Station2 Test Report  Suprema Inc.
Page 11 of FS2-D Face Station2 Test Report  Suprema Inc.
Page 12 of FS2-D Face Station2 Test Report  Suprema Inc.
Page 13 of FS2-D Face Station2 Test Report  Suprema Inc.
Page 14 of FS2-D Face Station2 Test Report  Suprema Inc.
Page 15 of FS2-D Face Station2 Test Report  Suprema Inc.
Page 16 of FS2-D Face Station2 Test Report  Suprema Inc.
Page 17 of FS2-D Face Station2 Test Report  Suprema Inc.
Page 18 of FS2-D Face Station2 Test Report  Suprema Inc.

Test Report for FCC
FCC ID :TKWFS2-D
Report Number
ESTRFC1706-007
Company name
Applicant
16F Parkview office Tower, Jeongja-dong Bundang-gu, Seongnam,
Gyeonggi
Address
+82-31-710-4908
Telephone
Bongseop Song
Contact person
Product name
Product
Suprema Inc
Face Station2
Model No.
FS2-D
Manufacturer
Suprema Inc
Serial No.
None
Country of origin
KOREA
Date of issue
19-Jun-17
31-May-17
Test date
Testing
location
347-69, Jungbu-daero 147beon-gil, Majang-myeon, Icheon-si,
Gyeonggi-do 467-811, R. O. Korea
Standard
FCC PART 15 Subpart C(15.225), ANSI C 63.10(2013)
Result
Complied
Measurement facility registration number
659627
Tested by
Senior Engineer H.K. Lee
(Signature)
Reviewed by
Engineering Manager I.k. Hong
(Signature)
Abbreviation
OK, Pass = Complied,
Fail = Failed, N/A = not applicable
* Note
- This test report is not permitted to copy partly without our permission
- This test result is dependent on only equipment to be used
- This test result based on a single evaluation of one sample of the above mentioned
Report Number : ESTRFC1706-007
EST-P25-IO2-F04 (2016.01.01)
Page 1 of 18
Contents
1. Laboratory Information
2. Description of EUT
3. Test Standards
…………………………………………………………………………
………………………………………………………………………………
…………………………………………………………………………………… 5
4. Measurement condition
5. 20dBm Bandwidth
………………………………………………………………………… 6
………………………………………………………………………………
5.1 Procedure ……………………………………………………………………………………… 8
5.2 20dBm Bandwidth Set up ……………………………………………………………………
5.3 Measurement Data ……………………………………………………………………………
6. Frequency Tolerance
6.1 Procedure
……………………………………………………………………………
10
……………………………………………………………………………………… 10
6.2 Test Equipments
6.3 Measurement Data
……………………………………………………………………………… 10
…………………………………………………………………………… 11
7. Measurement of radiated emission
…………………………………………………………… 13
7.1 Radiated emission limits, general requirements
………………………………………… 13
7.2 Measurement equipment
…………………………………………………………………… 13
7.3 Environmental conditions
…………………………………………………………………… 13
7.4 Test data(9 kHz ~30 MHz)
………………………………………………………………… 14
7.5 Test data(30 MHz ~ 1 GHz)
7.6 Test data(Above 1 GHz)
………………………………………………………………
…………………………………………………………………… 16
8. Measurement of conducted emission
8.1 Measurement equipment
15
………………………………………………………… 17
…………………………………………………………………… 17
8.2 Environmental conditions …………………………………………………………………… 17
8.3 Test data
……………………………………………………………………………………… 18
Appendix 1. Special diagram(Adapter Mode)
Appendix 2. Antenna Requirement
Report Number : ESTRFC1706-007
EST-P25-IO2-F04 (2016.01.01)
Page 2 of 18
1. Laboratory Information
1.1 General
This EUT (Equipment Under Test) has been shown to be capable of compliance with the applicable
technical standards and is tested in accordance with the measurement procedures as indicated in
this report.ESTECH Lab attests to accuracy of test data. All measurement reported herein were
performed by ESTECH Co., Ltd.
ESTECH Lab assume full responsibility for the completeness of these measurements and vouch for
the qualifications of all persons taking them.
1.2 Test Lab.
Corporation Name : ESTECH Co., Ltd.
Head Office : Suite 1015 World Meridian II, 123 Gasan Digital 2-ro, Geumcheon-gu,
Seoul 153-759, R. O. Korea
EMC/Telecom/Safety Test Lab : 347-69, Jungbu-daero 147beon-gil, Majang-myeon, Icheon-si,
Gyeonggi-do 467-811, R. O. Korea
1.3 Official Qualification(s)
MSIP : Granted Accreditation from Ministry of Information & Communication for EMC, Safety
and Telecommunication
KOLAS : Accredited Lab By Korea Laboratory Accreditation Schema base on CENELEC
requirements
FCC : Conformity Assessment Body(CAB) with registration number 659627 under
APEC TEL MRA between the RRA and the FCC
VCCI : Granted Accreditation from Voluntary Control Council for Interference from ITE
Report Number : ESTRFC1706-007
EST-P25-IO2-F04 (2016.01.01)
Page 3 of 18
2. Description of EUT
2.1 Summary of Equipment Under Test
Product
Model Number
Serial Number
Manufacturer
Country of origin
Operating Frequency
Antenna Type
Modulation Type
Channel
Face Station2
FS2-D
NONE
Suprema Inc
KOREA
13.56 MHz
PCB Patten Antenna
ASK
1 ch
Power Rating
INPUT : (100 - 240) Va.c., (50 - 60) Hz, 1.0 A
OUTPUT : 24 Vd.c., 2.5 A
Receipt Date
: 5-Dec-16
X-tal list(s) or
: The highest operating frequency is CPU 1.4 GHz
Frequencies generated
2.2 General descriptions of EUT
CPU 1.4 GHz Quad Core
Memory 8GB Flash + 1GB RAM
LCD 4” color TFT LCD (Resolution: 480 x 800)
Sound 24 bit/Voice DSP (echo cancel)
Operating temperature -20 °C ~ 50 °C
Storage temperature -40 °C ~ 70 °C
Operating humidity 0 % ~ 80 %, non-condensing
Storage humidity 0 % ~ 90 %, non-condensing
Camera CMOS VGA (720 x 480) pixels
Camera angle Visual : Diagonal 92.7° , IR : Diagonal 58°
Dimension (W x H x D) 141 mm x 125 mm x 164 mm (h)
Weight Device: 610 g (With Wall-Bracket)
RF Option RFID : 13.56 MHz / 117 kHz
Report Number : ESTRFC1706-007
EST-P25-IO2-F04 (2016.01.01)
Page 4 of 18
3. Test Standards
Test Standard : FCC PART 15 Subpart C(15.225)
This Standard sets out the regulations under which an intentional, unintentional, or incidental
radiator may be operated without an individual license. It also contains the technical
specifications, administrative requirements and other conditions relating to the marketing of Part
15 devices.
Test Method : ANSI C 63.10 (2013)
This standard sets forth uniform methods of measurement of radio-frequency (RF) signals and
noise emitted from both unintentional and intentional emitters of RF energy in the frequency range
9 kHz to 40 GHz. Methods for the measurement of radiated and AC power-line conducted radio
noise are covered and may be applied to any such equipment unless otherwise specified by
individual equipment requirements. These methods cover measurement of certain decides that
deliberately radiate energy, such as intentional emitters, but does not cover licensed transmitters.
This standard is not intended for certification/approval of avionic equipment or for industrial,
scientific, and medical (ISM) equipment These method apply to the measurement of individual
units or systems comprised of multiple units
Summary of Test Results
Applied Satandard : 47 CFR Part 15, Subpart C
Standard
Test Type
Result
Remark
15.203
Antenna Requirement
Pass
Meet the requirement
15.207
AC Power Conducted Emission
Pass
Meet the requirement
15.225(a)
Radiated Emission
(13.553 ~13.567) MHz
Pass
Meet the requirement
15,848 uV/m
at 30 m
15.225(b)
Radiated Emission
(13.410 ~13.553 ,
13.567 ~ 13.710) MHz
Pass
Meet the requirement
334 uV/m
at 30 m
15.225(c)
Radiated Emission
(13.110 ~13.410 ,
13.710 ~ 14.010) MHz
Pass
Meet the requirement
106 uV/m
at 30 m
15.225(d)
Apply section 15.209
(out side band of the 13.110
~14.010) MHz
Pass
Meet the requirement
15.225(e)
Frequency stability
Pass
Meet the requirement
15.215(c)
20dB Bandwidth
Pass
Meet the requirement
Report Number : ESTRFC1706-007
EST-P25-IO2-F04 (2016.01.01)
Limit
Page 5 of 18
4. Measurement Condition
4.1 EUT Operation.
-The EUT was tested, under transmission / receiving
1. Normal communication with RF OUT Frequeny(13.56 MHz).
2. Monitoring the operation status of frequency by using RF CARD.
4.2 Configuration and Peripherals
Report Number : ESTRFC1706-007
EST-P25-IO2-F04 (2016.01.01)
Page 6 of 18
4.3 EUT and Support equipment
Equipment Name
Model Name
S/N
Manufacturer
Remark
(FCC ID)
Face Station2
FS2-D
NONE
Suprema Inc
EUT
Adapter
JPW128KA1200N05
NONE
BridgePower Corp.
RF CARD
NONE
NONE
NONE
4.4 Cable Connecting
Start Equipment
End Equipment
Cable Standard
Remark
Name
I/O port
Name
I/O port
Length
Shielded
Face Station2
Power
Adapter
2.0
Unshielded
Face Station2
Wireless
(13.56 MHz)
RF CARD
Wireless
(13.56 MHz)
Report Number : ESTRFC1706-007
EST-P25-IO2-F04 (2016.01.01)
Page 7 of 18
5. 20 dB Bandwidth
5.1 Procedure
The transmitter output was connected to the spectrum analyzer. The bandwidth of the fundamental
frequency was measured by spectrum analyzer. The 20 dB bandwidth is defined as the bandwidth at 20 dB
below from peak power point.
5.2 20dB Bandwidth setup
The spectrum analyzer is set to as following
RBW: 30 Hz
VBW: 300 Hz
Span: 5 kHz
Sweep:suitable duration based on the EUT specification
20dB Bandwidth Test Instruments
Decription
Model
Serial Number
Cal. Due Data
Signal Analyzer
FSV40
100939
4-Jan-18
5.3 Measurement Data
Report Number : ESTRFC1706-007
EST-P25-IO2-F04 (2016.01.01)
Page 8 of 18
6. Frequency Tolerance
6.1 Procedure
The frequency stability of the transmitter is measured by:
a) Temperature: The temperature is varied from -20 ℃ to +50 ℃ using an environmental chamber.
b) Primary Supply Voltage: The primary supply voltage is varied from 85 % to 115 % of the voltage normally at the
input to the device or at the power supply terminals if cables are not normally supplied.
The frequency tolerance of the carrier shall be maintained within ±0.01 % of the operating frequency.
6.2 Equipment lists
The following test equipments are used during test
Decription
Model
Serial Number
Cal. Due Data
Signal Analyzer
FSV40
100939
4-Jan-18
Temp./Humidity Chamber
SM-150-2
04-TH24
4-Jan-18
Report Number : ESTRFC1706-007
EST-P25-IO2-F04 (2016.01.01)
Page 10 of 18
6.3 Measurement Data (Adapter)
Operting Frequency :
Reference Voltage :
Deviatin Limit :
13,560,361 Hz
12.00 Vd.c.
± 0.01 %
Voltage
Power
Temperature
Frequency
Deviation
(%)
(Vdc)
(℃)
(Hz)
(%)
100
+20 ℃(Ref)
13,560,242
-0.000878
100
-20
13,560,250
-0.000819
100
-10
13,560,268
-0.000686
100
13,560,269
-0.000678
10
13,560,465
0.000767
100
20
13,560,230
-0.000966
100
30
13,560,382
0.000155
100
40
13,560,118
-0.001792
100
50
13,560,261
-0.000737
100
24.00
85
20.40
20
13,560,359
-0.000015
115
31.68
20
13,560,459
0.000723
Report Number : ESTRFC1706-007
EST-P25-IO2-F04 (2016.01.01)
Page 11 of 18
7. Measurement of radiated disturbance
The EUT was placed on the top of a rotating table 0.8 m above the ground at a 10 m semi-anechoic chamber . The
table was rotated 360° to determine the position of the highest radiation.Then antenna is a loop antenna is fixed at 1 m
above the ground to determine the maximum value of the field strength. Both parallel and perpendicular of the antenna
are set to make the measurement. For each suspected emission, the EUT was arranged to its worst case and then the
table was turned from 0° to 360° to find the maximum reading. The test receiver system was set to Peak Detect
Function and Specified Bandwidth with Maximum Hold Mode.
7.1 Radiated emission limits, general requirements
Except as provided elsewhere in this Subpart, the emissions from an intentional radiator
shall not exceed the field strength levels specified in the following table:
Field strength @30 m
Frequency
Field strength @30 m
(dBuV/m)
(MHz)
(uV/m)
29.5
Below 13.110
30
40.5
13.110 ~13.410
106
50.5
Field strength @3m
(dBuV/m)
69.5
80.5
13.410~13.553
334
13.553~13.567
15,848
84
124
13.567~13.710
334
50.5
90.5
13.710~14.010
106
40.5
80.5
Above 14.010
30
29.5
69.5
* dBuV/m=20*log(uV/m)
90.5
* Distance factor=40dB / decade(15.31(f))
7.2 Measurement equipments
Equipment Name
Type
Manufacturer
Serial No.
Next
Calibration date
TEST Receiver
ESCI7
ROHDE & SCHWARZ
100916
5-Nov-17
Logbicon Antenna
VULB 9168
SCHWARZBECK
193
12-Oct-18
Turn Table
DT3000-2t
Innco System GmbH
N/A
Antenna Mast
MA4000-EP
Innco System GmbH
N/A
22-Aug-17
Antenna Master &
Turn table controller
CO2000-P
Innco System GmbH
CO2000/641
/28051111/L
Loop Antenna
HFH2-Z2
ROHDE & SCHWARZ
100188
7.3 Environmental Condition
Test Place
Below 1 GHz
Temperature (°C)
Humidity (% R.H.)
: 10 m Semi-anechoic chamber
Test Place
Above 1 GHz-N/A
Temperature (°C)
Humidity (% R.H.)
: 3 m Semi-anechoic chamber(3 m)
: 22.1 ℃
: 48.5 % R.H.
Report Number : ESTRFC1706-007
EST-P25-IO2-F04 (2016.01.01)
Page 13 of 18
7.4 Test data(9 kHz ~ 30 MHz)
Test Date : 9-Feb-17
Frequency
(MHz)
Reading
(dB㎶)
Measurement Distance :
Correction Factor
Vertical
EUT Height
Position
Cable
Ant Factor
Position (m)
[Angle]
(dB)
(dB)
3m
Result Value(Quasi-Peak)
Limit
Result
(dB㎶/m) (dB㎶/m)
Margin
(dB)
Below 13.110 MHz
Noise Floor
19.30
0.5
69.5
0.5
80.5
0.5
90.5
0.4
124.0
62.72
61.28
0.5
90.5
0.5
80.5
0.8
69.5
13.110 MHz to 13.410 MHz
Noise Floor
19.30
13.410 MHz to 13.553 MHz
Noise Floor
19.30
13.553 MHz to 13.567 MHz
13.5600
42.98
180 °
0.8
19.30
13.567 MHz to 13.710 MHz
Noise Floor
19.30
13.710 MHz to 14.010 MHz
Noise Floor
14.010 MHz to 30 MHz
Noise Floor
Remark
19.20
*The 30 m limit was converted to 3 m Limit using square factor(x) as it was found by
measurements as follows;
*3 m Limit(dBuV/m) = 20log(X)+40log(30/3)= 20log(15848)+40log(30/3) = 124 dBuV
*3 m Limit(dBuV/m) = 20log(X)+40log(30/3)= 20log(30)+40log(30/3) = 69.5 dBuV
* The EUT was measured for the worst case by rotating of antenna angle.
* The EUT performed at X,Y,Z and recorded the worst data in the report.
Report Number : ESTRFC1706-007
EST-P25-IO2-F04 (2016.01.01)
Page 14 of 18
7.5 Test data(30 MHz ~ 1 000 MHz)
Measurement Distance :
Test Date :
31-May-17
Frequency
(MHz)
Reading
(dB㎶)
140.80
23.47
162.70
21.69
217.60
Position Height
(V/H)
(m)
Correction Factor
3m
Result Value(Quasi-peak)
Ant Factor
(dB)
Cable
(dB)
Limit
(dB㎶/m)
Result
(dB㎶/m)
Margin
(dB)
1.0
12.68
1.79
43.50
37.93
5.57
1.0
13.10
1.93
43.50
36.72
6.78
23.68
1.8
10.65
2.26
46.00
36.59
9.41
230.40
24.81
1.8
11.10
2.34
46.00
38.25
7.75
243.10
27.93
1.6
11.55
2.41
46.00
41.89
4.11
332.80
18.63
1.4
14.21
2.85
46.00
35.69
10.31
351.00
18.52
1.3
14.80
2.93
46.00
36.25
9.75
400.00
24.70
1.2
15.63
3.16
46.00
43.49
2.51
Remark
H : Horizontal, V : Vertical
*Result Value = Reading + Antenna + Cable loss
*Correction Factor = Ant Factor + Cable
*The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120 kHz for
Quasi-peak detection
Report Number : ESTRFC1706-007
EST-P25-IO2-F04 (2016.01.01)
Page 15 of 18
7.6 Test data (Above 1 GHz) - N / A
Measurement Distance :
Test Date :
Frequency
(MHz)
Reading
(dB㎶)
Position Height
(V/H)
(m)
Correction Factor
Ant Factor
(dB)
Cable
(dB)
3m
Result Value
Limit
(dB㎶/m)
Result
(dB㎶/m)
Margin
(dB)
Peak(RBW:1 MHz VBW:1 MHz)
Average(RBW:1 MHz VBW:10 Hz)
Remark
H : Horizontal, V : Vertical
*Reading = receiver reading + Amplifier Gain
*CL = Cable Loss-Amplifier Gain
*The resolution bandwidth and video bandwidth of spectrum analyzer is 1 MHz and 10 Hz for average detection at
frequency above 1 GHz.
*This test does not require because the highest operating frequency of the EUT is less than 108 MHz.
*Application method of the highest frequency is in the following
*Highest frequency of the EUT is less than 108 MHz, the measurement shall only be made up to 1 GHz.
*Highest frequency of the EUT is between 108 MHz and 500 MHz, the measurement shall only be made up to 2 GHz.
*Highest frequency of the EUT is between 500 MHz and 1 GHz, the measurement shall only be made up to 5 GHz.
*Highest frequency of the EUT is above 1 GHz, the measurement shall be made up to 10 times the highest frequency
or 40 GHz,
Report Number : ESTRFC1706-007
EST-P25-IO2-F04 (2016.01.01)
Page 16 of 18
8. Measurement of conducted disturbance
The continuous disturbance voltage of AC Mains in the frequency from 0.15 MHz to 30 MHz was
measured in accordance to FCC Part 15 & ANSI C 63.10 (2013) The test setup was made
according to FCC Part 15 & ANSI C 63.10 (2013) in a shielded Room. The EUT was placed on a
non-conductive table at least 0.8 m above the ground plan. A grounded vertical reference plane
was positioned in a distance of 0.4 m from the EUT. The distance from the EUT to other metal
surfaces was at least 0.8 m. The EUT was only earthen by its power cord through the line
impedance stabilizing network. The power cord has been bundled to a length of 1.0 m. The test
receiver with Quasi Peak detector complies with CISPR 16.
8.1 Measurement equipments
Equipment Name
Type
Manufacturer
Serial No.
Next Calibration
date
TEST RECEIVER
ESPI
Rohde & Schwarz
100005
4-Nov-17
LISN
ESH3-Z5
Rohde & Schwarz
836679/025
4-Nov-17
Pulse Limiter
ESH3Z2
Rohde & Schwarz
NONE
4-Nov-17
8.2 Environmental Condition
Test Place
: Shielded Room
Temperature (°C)
: 22.4 ℃
Humidity (% R.H.) : 49.6 % R.H.
Report Number : ESTRFC1706-007
EST-P25-IO2-F04 (2016.01.01)
Page 17 of 18
8.3 Test data
Test Date :
31-May-17
Correction Factor
Frequency
(MHz)
Lisn
(dB)
Cable
(dB)
0.15
0.16
0.12
0.16
0.09
0.17
Quasi-peak Value
Line
(H/N)
Average Value
Limit
(dB㎶)
Reading
(dB㎶)
Result
(dB㎶)
Limit
(dB㎶)
Reading
(dB㎶)
Result
(dB)
66.00
41.46
41.74
56.00
24.31
24.59
0.14
65.46
41.74
41.97
55.46
24.47
24.70
0.09
0.15
64.96
38.95
39.19
54.96
55.22
55.46
0.18
0.16
0.17
64.49
37.59
37.92
54.49
23.68
24.01
0.20
0.09
0.20
63.61
33.67
33.96
53.61
27.36
27.65
0.41
0.16
0.21
57.65
33.67
34.04
47.65
27.36
27.73
13.41
0.57
0.36
60.00
26.39
27.32
50.00
9.99
10.92
27.00
0.75
0.54
60.00
41.19
42.47
50.00
38.11
39.39
Remark
H : Hot Line, N : Neutral Line
*Correction Factor = Lisn + Cable
*Result = Correction Factor + Reading
Report Number : ESTRFC1706-007
EST-P25-IO2-F04 (2016.01.01)
Page 18 of 18
Appendix 1. Special diagram
* HOT LINE
Att 10 dB AUTO
dBµV
80
RBW
9 kHz
MT
1 s
PREAMP OFF
1 MHz
10 MHz
SGL
70
1 PK
CLRWR
2 AV
CLRWR
Quasi-PK
60
TDF
CISPR-AV
50
PRN
40
6DB
30
20
10
150 kHz
30 MHz
Comment: 05016_13.56M_HOT
Date:
31.MAY.2017
13:35:00
* NEUTRAL LINE
Att 10 dB AUTO
dBµV
80
1 MHz
RBW
9 kHz
MT
1 s
PREAMP OFF
10 MHz
SGL
70
1 PK
CLRWR
2 AV
CLRWR
Quasi-PK
60
TDF
CISPR-AV
50
PRN
40
6DB
30
20
10
150 kHz
Comment: 05016_13.56M_NEUTRAL
Date:
31.MAY.2017
13:50:10
30 MHz
Appendix 1. Antenna Requirement
Requlation
According to §15.203, an intentional radiator shall be designed to ensure that no
antenna other than that furnished by the responsible party shall be used with the
device. The use of a permanently attached antenna or of an antenna that uses a
unique coupling to the intentional radiator shall be considered sufficient to comply
with the provisions of this Section. The manufacturer may design the unit so that
a broken antenna can be replaced by the user, but the use of a standard antenna
jack or electrical connector is prohibited.
Result
-Complied
The transmitter has an PCB Patten Antenna.
Download: FS2-D Face Station2 Test Report  Suprema Inc.
Mirror Download [FCC.gov]FS2-D Face Station2 Test Report  Suprema Inc.
Document ID3461771
Application IDoYi0L6QByKVGVfSr1cByWw==
Document DescriptionTest Report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize30.25kB (378080 bits)
Date Submitted2017-07-12 00:00:00
Date Available2017-07-12 00:00:00
Creation Date2017-07-04 13:18:31
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2017-07-04 13:18:31
Document TitleTest Report
Document CreatorPScript5.dll Version 5.2.2
Document Author:

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : 
Create Date                     : 2017:07:04 13:18:31+09:00
Modify Date                     : 2017:07:04 13:18:31+09:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : 
Title                           : ESTRFC1706-007- Suprema Inc-FS2-D_13.56MHz_Report.xls
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:cd64c15a-5480-430c-be43-0a950ea14dd9
Instance ID                     : uuid:4febb22d-54fe-4dae-ade6-2cd89de9086d
Page Count                      : 18
EXIF Metadata provided by EXIF.tools

Facebook Twitter Google+ RSS © FCCID.io 2017