FCC ID TLZ-CM2XXNF

IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module

by AzureWave Technologies, Inc.

Grantee Code: TLZ   Product Code: CM2XXNF
Latest application date: 2018-11-12

Device Images

FCC ID Device Details

FCC IDTLZ-CM2XXNF
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeTLZ
Product CodeCM2XXNF
Applicant BusinessAzureWave Technologies, Inc. 🇹🇼
Related Domains azurewave.com
Equipment ClassIEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Test FirmBureau Veritas CPS (H.K.) Ltd., Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-11-12
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-11-12
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-11-12
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-11-12
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-11-12
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2015-11-12
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-10-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-10-02
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2015-10-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-09-29
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2015-09-29
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-09-29
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-08-10
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2015-08-10
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-08-10
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-04-20
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2015-04-19
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2015-04-16
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-04-16
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2015-04-16
2402-2480 MHzOriginal Equipment2015-03-02
5180-5240 MHzOriginal Equipment2015-03-02
2402-2480 MHzOriginal Equipment2015-03-02

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2016-03-25PDF 563.5 KB
Users ManualUsers Manual2015-11-12PDF 1.9 MB
User ManualUsers Manual2015-10-12PDF 4.3 MB
notebook user manualUsers Manual2015-04-20PDF 1.6 MB
User Manual (AW-CM195NF)_rev.pdfUsers Manual2015-03-02PDF 580.8 KB
User Manual (AW-CM217NF)_rev.pdfUsers Manual2015-03-02PDF 2.2 MB
User Manual (AW-CM235NF)_rev.pdfUsers Manual2015-03-02PDF 580.8 KB
Internal Photos.pdfInternal Photos2018-11-12PDF 1.4 MB
Internal PhotosInternal Photos2016-03-25PDF 921.6 KB
Internal PhotosInternal Photos2015-11-12PDF 1 MB
Internal PhotosInternal Photos2015-10-12PDF 682 KB
Internal Photos.pdfInternal Photos2015-08-10PDF 1.3 MB
Internal Photos_rev.pdfInternal Photos2015-03-02PDF 1.5 MB
External Photos.pdfExternal Photos2018-11-12PDF 3.8 MB
External PhotosExternal Photos2016-03-25PDF 405.9 KB
External PhotosExternal Photos2015-11-12PDF 846.8 KB
External PhotosExternal Photos2015-10-12PDF 2.5 MB
External Photos.pdfExternal Photos2015-08-10PDF 1.3 MB
1520310R- Host Photo-2015-04-16External Photos2015-04-20PDF 2.6 MB
1520310R-Module External Photo-2015-04-15External Photos2015-04-20PDF 758.1 KB
External Photos_rev.pdfExternal Photos2015-03-02PDF 754.9 KB
Label LocationID Label/Location Info2015-11-12PDF 76.6 KB
Label sampleID Label/Location Info2015-11-12PDF 22.6 KB
LabelID Label/Location Info2015-09-29PDF 332.1 KB
Label LocationID Label/Location Info2015-04-16PDF 43.8 KB
Label SampleID Label/Location Info2015-04-16PDF 40.6 KB
Label Location.pdfID Label/Location Info2015-03-02PDF 21.3 KB
Label Sample_rev.pdfID Label/Location Info2015-03-02PDF 144.9 KB
Software Operating Description rev.pdf Metadata onlyOperational Description2015-08-10PDF 96 KB
Test Setup Photo (for DFS).pdfTest Setup Photos2018-11-12PDF 89.2 KB
Test Setup Photo.pdfTest Setup Photos2018-11-12PDF 1.2 MB
Test Setup Photos (SAR).pdfTest Setup Photos2016-03-30PDF 1.1 MB
SAR Setup PhotosTest Setup Photos2016-03-25PDF 779.3 KB
Test Setup Photos for SARTest Setup Photos2015-11-12PDF 351.1 KB
Test Setup Photos RFTest Setup Photos2015-10-12PDF 86.9 KB
Test Setup Photos RF ExpTest Setup Photos2015-10-12PDF 86.9 KB
Test Setup Photos (SAR) rev 2.pdfTest Setup Photos2015-08-10PDF 740.5 KB
Test Set up photo-DFS_rev.pdfTest Setup Photos2015-03-02PDF 115.5 KB
Test Set up photo.pdfTest Setup Photos2015-03-02PDF 955.7 KB
Test Report (DFS).pdfTest Report2018-11-12PDF 978.2 KB
Test Report (DSS).pdfTest Report2018-11-12PDF 1.5 MB
Test Report (DTS-BT LE).pdfTest Report2018-11-12PDF 1.2 MB
Test Report (DTS-WLAN).pdfTest Report2018-11-12PDF 2.4 MB
Test Report (NII).pdfTest Report2018-11-12PDF 3.4 MB
Test Report (DFS)_rev 2.pdfTest Report2015-03-02PDF 700.2 KB
Test Report (DSS)_rev 2.pdfTest Report2015-03-02PDF 1.7 MB
Test Report (DTS-BT LE)_rev 2.pdfTest Report2015-03-02PDF 816.5 KB
Test Report (DTS-WLAN)_rev 2.pdfTest Report2015-03-02PDF 1.4 MB
Test Report (NII)_rev 2.pdfTest Report2015-03-02PDF 1 MB
AttestationAttestation Statements2015-11-12PDF 24.9 KB
Attestation - Power declaration rev2.pdfAttestation Statements2015-10-02PDF 54.7 KB
FCC attestation letter.pdfAttestation Statements2015-08-10PDF 290.6 KB
Attestation (BCM declaration letter)_rev.pdfAttestation Statements2015-03-02PDF 633.1 KB
Attestation (Channel and Mode Declaration).pdfAttestation Statements2015-03-02PDF 107.4 KB
Attestation (DFS Client Declaration).pdfAttestation Statements2015-03-02PDF 507.8 KB
Cover Letter (Agent Authorization).PDFCover Letter(s)2018-11-12PDF 304.3 KB
Cover Letter (Description of Change).pdfCover Letter(s)2018-11-12PDF 260.7 KB
Authorization LetterCover Letter(s)2015-11-12PDF 30.4 KB
Declaration of Class II ChangeCover Letter(s)2015-11-12PDF 36.6 KB
Cover Letter - Agent Authorization.pdfCover Letter(s)2015-10-02PDF 273.8 KB
Cover Letter - Confidentiality Request - Short Term.pdfCover Letter(s)2015-10-02PDF 97.2 KB
Cover Letter - Description of Change rev.pdfCover Letter(s)2015-10-02PDF 221.2 KB
Agent Authorization LetterCover Letter(s)2015-09-29PDF 155.2 KB
C2PC LetterCover Letter(s)2015-09-29PDF 132.1 KB
Confidentiality LetterCover Letter(s)2015-09-29PDF 239.2 KB
RSE Justification LetterCover Letter(s)2015-09-29PDF 221.2 KB
Cover Letter - Agent Authorization.pdfCover Letter(s)2015-08-10PDF 268 KB
Cover Letter - Confidentiality Request - Long Term.pdfCover Letter(s)2015-08-10PDF 133.2 KB
Cover Letter - Description of Change.pdfCover Letter(s)2015-08-10PDF 66.2 KB
1520310R- Cover Letter-Modular Approval--FCC-2015-04-16Cover Letter(s)2015-04-20PDF 97.6 KB
1520310R-Declaration of authorizationCover Letter(s)2015-04-20PDF 196.1 KB
1520310R-PCII Change Letter-2015-04-15Cover Letter(s)2015-04-20PDF 195.8 KB
C2PC RequestCover Letter(s)2015-04-16PDF 242.4 KB
Class II Change LetterCover Letter(s)2015-04-16PDF 242.4 KB
Confidential LetterCover Letter(s)2015-04-16PDF 93.9 KB
Confidentiality LetterCover Letter(s)2015-04-16PDF 93.9 KB
POACover Letter(s)2015-04-16PDF 286.3 KB
Confidentiality Request Letter.pdfCover Letter(s)2015-03-02PDF 256.1 KB
Cover Letter (Agent Authorization)_rev.pdfCover Letter(s)2015-03-02PDF 264.5 KB
Cover Letter (Modular Approval Request).pdfCover Letter(s)2015-03-02PDF 44.5 KB
RF Exposure Info (MPE).pdfRF Exposure Info2018-11-12PDF 396 KB
Sar Report-1RF Exposure Info2015-11-12PDF 4.5 MB
Sar Report-2RF Exposure Info2015-11-12PDF 5.8 MB
RF Exposure Information (SAR).pdfRF Exposure Info2015-10-02PDF 5.5 MB
19.1_System performance check plotsRF Exposure Info2015-09-29PDF 455.8 KB
19.2_SAR Test Data PlotsRF Exposure Info2015-09-29PDF 382.1 KB
19.3_Calibration Data ReportRF Exposure Info2015-09-29PDF 5.8 MB
SAR Appendix F Metadata onlyRF Exposure Info2015-09-29PDF 1.2 MB
SAR ReportRF Exposure Info2015-09-29PDF 1.2 MB
SAR ReportRF Exposure Info2015-09-29PDF 1.4 MB
RF Exposure Information (SAR) rev 3.pdfRF Exposure Info2015-08-10PDF 3.7 MB
1520310R-statement for SAR not required FOR FCC-2015-04-15 Metadata onlyRF Exposure Info2015-04-20PDF 75.9 KB
statement for SAR not required FOR FCC-2015-04-20RF Exposure Info2015-04-20PDF 84.7 KB
statement for SAR not required FOR FCC-2015-04-20 Metadata onlyParts List/Tune Up Info2015-04-19PDF 84.7 KB
RF ExposureRF Exposure Info2015-04-16PDF 1.1 MB
RF Exposure Appendix ARF Exposure Info2015-04-16PDF 250.3 KB
RF Exposure Appendix BRF Exposure Info2015-04-16PDF 201.7 KB
RF Exposure Appendix CRF Exposure Info2015-04-16PDF 797.6 KB
RF Exposure InfoRF Exposure Info2015-04-16PDF 1.1 MB
RF Exposure Info (MPE).pdfRF Exposure Info2015-03-02PDF 353.6 KB
Antenna Specification Metadata onlyOperational DescriptionPDF 2 MB
Operational Description Antenna Report AUX Metadata onlyOperational DescriptionPDF 392 KB
Operational Description Antenna Report Aux Metadata onlyOperational DescriptionPDF 392 KB
Operational Description Antenna Report Main Metadata onlyOperational DescriptionPDF 390.9 KB
Operational Description Host Antenna Report AUX Metadata onlyOperational DescriptionPDF 392 KB
Operational Description Host Antenna Report MAIN Metadata onlyOperational DescriptionPDF 390.9 KB
Software Security Description Metadata onlyOperational DescriptionPDF 132.2 KB
Tune up Procedure Metadata onlyParts List/Tune Up InfoPDF 152.5 KB

Application Information

Application IDo+Is5ciy5P6iOLF3jZE0YQ==
Final Action Date2018-11-12
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0013946611
ModelCM2XXNF
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionIEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Responsible PartyPatrick Lin, Director, patrick.lin@azurewave.com , 02-55995599
AgentAmanda Amanda Amanda, Bureau Veritas Consumer Products Services (H.K.) L, amanda.wu@tw.bureauveritas.com , 88633183232
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@bureauveritas.com , +886-3-2600884
TCB Emailtcb@us.bureauveritas.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change as described in this filing. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth mode.

Applications

Application IDDatePurpose
o+Is5ciy5P6iOLF3jZE0YQ==2018-11-12Class II permissive change or modification of presently authorized equipment
l1CHtVkRRyNRqiAyKrRupA==2018-11-12Class II permissive change or modification of presently authorized equipment
8UUZL8iszrFvM0zUrF9Gyg==2018-11-12Class II permissive change or modification of presently authorized equipment
bnQlMwQAy2diNb3II8iIYw==2015-11-12Class II permissive change or modification of presently authorized equipment
VhSSMoXYWAZ2LempgXQ2kA==2015-11-12Class II permissive change or modification of presently authorized equipment
EIoYra0g6yYUZlP0dbTLmg==2015-11-12Class II permissive change or modification of presently authorized equipment
pHNlS0kxrz2tyX0T6zGrqA==2015-10-02Class II permissive change or modification of presently authorized equipment
h5ZRDow6Lg4r6v4w53WU+w==2015-10-02Class II permissive change or modification of presently authorized equipment
G3OI/Xryb6Oej7Xx23nhqw==2015-10-02Class II permissive change or modification of presently authorized equipment
yDc/9htfRhcjQRl/NS9Q4w==2015-09-29Class II permissive change or modification of presently authorized equipment
bYXbYGNAN6Ydd/hMb9lsaQ==2015-09-29Class II permissive change or modification of presently authorized equipment
Fg4pB+4yChFIknghxqNf6w==2015-09-29Class II permissive change or modification of presently authorized equipment
yY1fX+0R0Qp/GfS0D9q+MQ==2015-08-10Class II permissive change or modification of presently authorized equipment
MTJ/zj1vGVfQgZPAJUHoYg==2015-08-10Class II permissive change or modification of presently authorized equipment
FtiFZy2XGLQyZfeQyZf6ug==2015-08-10Class II permissive change or modification of presently authorized equipment
EG2ZyZ6zFK83p/VVegx+cQ==2015-04-20Class II permissive change or modification of presently authorized equipment
12IYU9hN26tMYkYNQjfw2Q==2015-04-19Class II permissive change or modification of presently authorized equipment
iGjIOF4oWvCJgU24h/HgMw==2015-04-16Class II permissive change or modification of presently authorized equipment
QAmJLhCoWlz27xSdB7nlWg==2015-04-16Class II permissive change or modification of presently authorized equipment
CFPsyy/Y6jwSlPBpwp1F+Q==2015-04-16Class II permissive change or modification of presently authorized equipment
n4dyEnvpAhmSmgTf8p/H6w==2015-03-02Original Equipment
aQZjXkS6rX8xXe7j1J7UMg==2015-03-02Original Equipment
CdNpbHrmF8kYm+yP9Lo4cg==2015-03-02Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.010000015CCC
2402-2480 MHz0.00715CCC, MO
2402-2480 MHz0.010000015C36, CC
2402-2480 MHz0.00715C36, CC, MO
2402-2480 MHz0.00715CCC
2412-2462 MHz0.46715CCC
2412-2462 MHz0.46715CCC, MO
2412-2462 MHz0.46715C36, CC, MO
5180-5240 MHz0.17715E38, CC, MO
5180-5240 MHz0.17715E36, 38, CC, MO
5180-5240 MHz0.177000015ECC
5180-5240 MHz0.17715ECC, MO
5260-5320 MHz0.17815E38, CC, MO
5260-5320 MHz0.17815E36, 38, CC, MO
5260-5320 MHz0.17815E38, CC, MO, ND
5260-5320 MHz0.17815ECC, MO, ND
5500-5700 MHz0.17815E38, CC, MO
5500-5700 MHz0.17815E36, 38, CC, MO
5500-5700 MHz0.17815E38, CC, MO, ND
5500-5700 MHz0.17815ECC, MO, ND
5745-5825 MHz0.17815E38, CC, MO
5745-5825 MHz0.17815E36, 38, CC, MO
5745-5825 MHz0.17815ECC, MO

Grants

TCB Grant - Application yY1fX+0R0Qp/GfS0D9q+MQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 08/10/2015

Application Dated: 08/10/2015
AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Class II Permissive Change as description in this filing for adding NB/Tablet host platform and can be used in a NB/Tablet which the certified antenna can be installed to keep at least 0.5cm away from end user. The highest reported SAR value for body worn condition is <0.1 W/kg.

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application yY1fX+0R0Qp/GfS0D9q+MQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
  Date of Grant: 08/10/2015

Application Dated: 08/10/2015
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Class II Permissive Change as description in this filing for adding NB/Tablet host platform and can be used in a NB/Tablet which the certified antenna can be installed to keep at least 0.5cm away from end user. The highest reported SAR value for body worn condition is <0.1 W/kg.

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application yDc/9htfRhcjQRl/NS9Q4w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 09/29/2015

Application Dated: 09/27/2015
AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC MO 15C 2402.0  -  2480.0 0.007  
36 CC MO 15C 2412.0  -  2462.0 0.467  

Class II permissive change to add the specific portable tablet configuration and antenna with power reduction as described in this filing. The highest reported SAR value under this filing is 0.22 W/Kg.

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth mode. The highest reported SAR value across all filings under this FCC ID is 1.14 W/kg.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application yDc/9htfRhcjQRl/NS9Q4w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
  Date of Grant: 09/29/2015

Application Dated: 09/27/2015
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC MO 15C 2402.0  -  2480.0 0.007  
36 CC MO 15C 2412.0  -  2462.0 0.467  

Class II permissive change to add the specific portable tablet configuration and antenna with power reduction as described in this filing. The highest reported SAR value under this filing is 0.22 W/Kg.

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth mode. The highest reported SAR value across all filings under this FCC ID is 1.14 W/kg.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application VhSSMoXYWAZ2LempgXQ2kA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 11/12/2015

Application Dated: 11/12/2015
AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Class II permissive : This change is to implement this module into Tablet (Product name : notebook, model numbers : EG20BA2 and EG20BI2) and Disable the frequency band from 5250-5350MHz and 5470-5825MHz by software. All other hardware are identical with original granted.

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application VhSSMoXYWAZ2LempgXQ2kA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
  Date of Grant: 11/12/2015

Application Dated: 11/12/2015
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Class II permissive : This change is to implement this module into Tablet (Product name : notebook, model numbers : EG20BA2 and EG20BI2) and Disable the frequency band from 5250-5350MHz and 5470-5825MHz by software. All other hardware are identical with original granted.

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application QAmJLhCoWlz27xSdB7nlWg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 04/16/2015

Application Dated: 04/15/2015
AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Output power listed is conducted. Limited Single Modular Approval. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. (Date of Grant: 03/02/2015)

Class II Permissive Change: This Class II Permissive Change is to integrate this module into ASUS Notebook PC, Model: C100P. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.16 W/kg and 1.08 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application QAmJLhCoWlz27xSdB7nlWg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
  Date of Grant: 04/16/2015

Application Dated: 04/15/2015
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Output power listed is conducted. Limited Single Modular Approval. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. (Date of Grant: 03/02/2015)

Class II Permissive Change: This Class II Permissive Change is to integrate this module into ASUS Notebook PC, Model: C100P. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.16 W/kg and 1.08 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application pHNlS0kxrz2tyX0T6zGrqA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 10/02/2015

Application Dated: 10/02/2015
AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Class II Permissive Change as described in this filing.

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application pHNlS0kxrz2tyX0T6zGrqA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
  Date of Grant: 10/02/2015

Application Dated: 10/02/2015
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Class II Permissive Change as described in this filing.

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application o+Is5ciy5P6iOLF3jZE0YQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 11/12/2018

Application Dated: 11/12/2018
AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.467  
CC 15C 2402.0  -  2480.0 0.007  

Class II Permissive Change as described in this filing. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth mode.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application o+Is5ciy5P6iOLF3jZE0YQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
  Date of Grant: 11/12/2018

Application Dated: 11/12/2018
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.467  
CC 15C 2402.0  -  2480.0 0.007  

Class II Permissive Change as described in this filing. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application n4dyEnvpAhmSmgTf8p/H6w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 03/02/2015

Application Dated: 03/02/2015
AzureWave Technologies, Inc.
8F, No. 94, Baozhong Rd.,
Xindian,, 231
Taiwan
 
Attention: Ivan Chen

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application n4dyEnvpAhmSmgTf8p/H6w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

AzureWave Technologies, Inc.
8F, No. 94, Baozhong Rd.,
Xindian,, 231
Taiwan
  Date of Grant: 03/02/2015

Application Dated: 03/02/2015
 
Attention: Ivan Chen

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application MTJ/zj1vGVfQgZPAJUHoYg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 08/10/2015

Application Dated: 08/10/2015
AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.177  
38 CC MO ND 15E 5260.0  -  5320.0 0.178  
38 CC MO ND 15E 5500.0  -  5700.0 0.178  
38 CC MO 15E 5745.0  -  5825.0 0.178  

Class II Permissive Change as description in this filing for adding NB/Tablet host platform and can be used in a NB/Tablet which the certified antenna can be installed to keep at least 0.5cm away from end user. The highest reported SAR value for body worn condition is 0.77 W/kg.

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application MTJ/zj1vGVfQgZPAJUHoYg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
  Date of Grant: 08/10/2015

Application Dated: 08/10/2015
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.177  
38 CC MO ND 15E 5260.0  -  5320.0 0.178  
38 CC MO ND 15E 5500.0  -  5700.0 0.178  
38 CC MO 15E 5745.0  -  5825.0 0.178  

Class II Permissive Change as description in this filing for adding NB/Tablet host platform and can be used in a NB/Tablet which the certified antenna can be installed to keep at least 0.5cm away from end user. The highest reported SAR value for body worn condition is 0.77 W/kg.

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application l1CHtVkRRyNRqiAyKrRupA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 11/12/2018

Application Dated: 11/12/2018
AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.177  
CC MO ND 15E 5260.0  -  5320.0 0.178  
CC MO ND 15E 5500.0  -  5700.0 0.178  
CC MO 15E 5745.0  -  5825.0 0.178  

Class II Permissive Change as described in this filing. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application l1CHtVkRRyNRqiAyKrRupA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
  Date of Grant: 11/12/2018

Application Dated: 11/12/2018
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.177  
CC MO ND 15E 5260.0  -  5320.0 0.178  
CC MO ND 15E 5500.0  -  5700.0 0.178  
CC MO 15E 5745.0  -  5825.0 0.178  

Class II Permissive Change as described in this filing. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application iGjIOF4oWvCJgU24h/HgMw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 04/16/2015

Application Dated: 04/15/2015
AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.177  
38 CC MO 15E 5260.0  -  5320.0 0.178  
38 CC MO 15E 5500.0  -  5700.0 0.178  
38 CC MO 15E 5745.0  -  5825.0 0.178  

Power listed is the maximum combined conducted output power. Limited Single Modular Approval. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode. (Date of Grant: 03/02/2015)

Class II Permissive Change: This Class II Permissive Change is to integrate this module into ASUS Notebook PC, Model: C100P. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.19 W/kg and 1.59 W/kg, respectively.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application iGjIOF4oWvCJgU24h/HgMw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
  Date of Grant: 04/16/2015

Application Dated: 04/15/2015
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.177  
38 CC MO 15E 5260.0  -  5320.0 0.178  
38 CC MO 15E 5500.0  -  5700.0 0.178  
38 CC MO 15E 5745.0  -  5825.0 0.178  

Power listed is the maximum combined conducted output power. Limited Single Modular Approval. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode. (Date of Grant: 03/02/2015)

Class II Permissive Change: This Class II Permissive Change is to integrate this module into ASUS Notebook PC, Model: C100P. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.19 W/kg and 1.59 W/kg, respectively.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application h5ZRDow6Lg4r6v4w53WU+w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 10/02/2015

Application Dated: 10/02/2015
AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.467  
CC 15C 2402.0  -  2480.0 0.007  

Class II Permissive Change as described in this filing. The highest reported SAR value for body-worn use condition is 0.63 W/kg.

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application h5ZRDow6Lg4r6v4w53WU+w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
  Date of Grant: 10/02/2015

Application Dated: 10/02/2015
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.467  
CC 15C 2402.0  -  2480.0 0.007  

Class II Permissive Change as described in this filing. The highest reported SAR value for body-worn use condition is 0.63 W/kg.

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application G3OI/Xryb6Oej7Xx23nhqw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 10/02/2015

Application Dated: 10/02/2015
AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.177  
38 CC MO ND 15E 5260.0  -  5320.0 0.178  
38 CC MO ND 15E 5500.0  -  5700.0 0.178  
38 CC MO 15E 5745.0  -  5825.0 0.178  

Class II Permissive Change as described in this filing. The highest reported SAR value for body-worn use condition is 0.64 W/kg.

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application G3OI/Xryb6Oej7Xx23nhqw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
  Date of Grant: 10/02/2015

Application Dated: 10/02/2015
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.177  
38 CC MO ND 15E 5260.0  -  5320.0 0.178  
38 CC MO ND 15E 5500.0  -  5700.0 0.178  
38 CC MO 15E 5745.0  -  5825.0 0.178  

Class II Permissive Change as described in this filing. The highest reported SAR value for body-worn use condition is 0.64 W/kg.

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application FtiFZy2XGLQyZfeQyZf6ug==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 08/10/2015

Application Dated: 08/10/2015
AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.467  
CC 15C 2402.0  -  2480.0 0.007  

Class II Permissive Change as description in this filing for adding NB/Tablet host platform and can be used in a NB/Tablet which the certified antenna can be installed to keep at least 0.5cm away from end user. The highest reported SAR value for body worn condition is 0.41 W/kg.

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application FtiFZy2XGLQyZfeQyZf6ug==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
  Date of Grant: 08/10/2015

Application Dated: 08/10/2015
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.467  
CC 15C 2402.0  -  2480.0 0.007  

Class II Permissive Change as description in this filing for adding NB/Tablet host platform and can be used in a NB/Tablet which the certified antenna can be installed to keep at least 0.5cm away from end user. The highest reported SAR value for body worn condition is 0.41 W/kg.

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application Fg4pB+4yChFIknghxqNf6w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 09/29/2015

Application Dated: 09/27/2015
AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC 15C 2402.0  -  2480.0 0.01  

Class II permissive change to add the specific portable tablet configuration and antenna with power reduction as described in this filing.

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The highest reported SAR value across all filings under this FCC ID is 0.16 W/kg


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Fg4pB+4yChFIknghxqNf6w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
  Date of Grant: 09/29/2015

Application Dated: 09/27/2015
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC 15C 2402.0  -  2480.0 0.01  

Class II permissive change to add the specific portable tablet configuration and antenna with power reduction as described in this filing.

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The highest reported SAR value across all filings under this FCC ID is 0.16 W/kg


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application EIoYra0g6yYUZlP0dbTLmg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 11/12/2015

Application Dated: 11/12/2015
AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.177  

Class II permissive : This change is to implement this module into Tablet (Product name : notebook, model numbers : EG20BA2 and EG20BI2) and Disable the frequency band from 5250-5350MHz and 5470-5825MHz by software. All other hardware are identical with original granted. The highest reported SAR value is 1.237 W/kg(Body).

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210 MHz.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application EIoYra0g6yYUZlP0dbTLmg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
  Date of Grant: 11/12/2015

Application Dated: 11/12/2015
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.177  

Class II permissive : This change is to implement this module into Tablet (Product name : notebook, model numbers : EG20BA2 and EG20BI2) and Disable the frequency band from 5250-5350MHz and 5470-5825MHz by software. All other hardware are identical with original granted. The highest reported SAR value is 1.237 W/kg(Body).

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210 MHz.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application EG2ZyZ6zFK83p/VVegx+cQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/20/2015

Application Dated: 04/19/2015
AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.467  
CC 15C 2402.0  -  2480.0 0.007  

Power listed is the maximum combined conducted output power. Single Modular Approval. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth mode.

This change is to establish conditions based on module standalone SAR test exclusion to establish minimum 88mm antenna to user separation distance for mixed mobile/portable conditions according to KDB 447498 D01 General RF exposure guidance v05.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application EG2ZyZ6zFK83p/VVegx+cQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
  Date of Grant: 04/20/2015

Application Dated: 04/19/2015
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.467  
CC 15C 2402.0  -  2480.0 0.007  

Power listed is the maximum combined conducted output power. Single Modular Approval. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth mode.

This change is to establish conditions based on module standalone SAR test exclusion to establish minimum 88mm antenna to user separation distance for mixed mobile/portable conditions according to KDB 447498 D01 General RF exposure guidance v05.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application CFPsyy/Y6jwSlPBpwp1F+Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 04/16/2015

Application Dated: 04/15/2015
AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2402.0  -  2480.0 0.007  
CC MO 15C 2412.0  -  2462.0 0.467  

Power listed is the maximum combined conducted output power. Limited Single Modular Approval. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth mode. (Date of Grant: 03/02/2015)

Class II Permissive Change: This Class II Permissive Change is to integrate this module into ASUS Notebook PC, Model: C100P. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.14 W/kg and 1.53 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application CFPsyy/Y6jwSlPBpwp1F+Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
  Date of Grant: 04/16/2015

Application Dated: 04/15/2015
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2402.0  -  2480.0 0.007  
CC MO 15C 2412.0  -  2462.0 0.467  

Power listed is the maximum combined conducted output power. Limited Single Modular Approval. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth mode. (Date of Grant: 03/02/2015)

Class II Permissive Change: This Class II Permissive Change is to integrate this module into ASUS Notebook PC, Model: C100P. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.14 W/kg and 1.53 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application CdNpbHrmF8kYm+yP9Lo4cg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 03/02/2015

Application Dated: 03/02/2015
AzureWave Technologies, Inc.
8F, No. 94, Baozhong Rd.,
Xindian,, 231
Taiwan
 
Attention: Ivan Chen

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.467  
CC 15C 2402.0  -  2480.0 0.007  

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth mode.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application CdNpbHrmF8kYm+yP9Lo4cg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

AzureWave Technologies, Inc.
8F, No. 94, Baozhong Rd.,
Xindian,, 231
Taiwan
  Date of Grant: 03/02/2015

Application Dated: 03/02/2015
 
Attention: Ivan Chen

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.467  
CC 15C 2402.0  -  2480.0 0.007  

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application bYXbYGNAN6Ydd/hMb9lsaQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 09/29/2015

Application Dated: 09/27/2015
AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 38 CC MO 15E 5180.0  -  5240.0 0.177  
36 38 CC MO 15E 5260.0  -  5320.0 0.178  
36 38 CC MO 15E 5500.0  -  5700.0 0.178  
36 38 CC MO 15E 5745.0  -  5825.0 0.178  

Class II permissive change to add the specific portable tablet configuration and antenna with power reduction as described in this filing. The highest reported SAR value under this filing is 0.90 W/Kg.

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode. The highest reported SAR value across all filings under this FCC ID is 1.19 W/kg.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application bYXbYGNAN6Ydd/hMb9lsaQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
  Date of Grant: 09/29/2015

Application Dated: 09/27/2015
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 38 CC MO 15E 5180.0  -  5240.0 0.177  
36 38 CC MO 15E 5260.0  -  5320.0 0.178  
36 38 CC MO 15E 5500.0  -  5700.0 0.178  
36 38 CC MO 15E 5745.0  -  5825.0 0.178  

Class II permissive change to add the specific portable tablet configuration and antenna with power reduction as described in this filing. The highest reported SAR value under this filing is 0.90 W/Kg.

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode. The highest reported SAR value across all filings under this FCC ID is 1.19 W/kg.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application bnQlMwQAy2diNb3II8iIYw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 11/12/2015

Application Dated: 11/12/2015
AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.467  
CC 15C 2402.0  -  2480.0 0.007  

Class II permissive : This change is to implement this module into Tablet (Product name : notebook, model numbers : EG20BA2 and EG20BI2) and Disable the frequency band from 5250-5350MHz and 5470-5825MHz by software. All other hardware are identical with original granted. The highest reported SAR value is 1.259 W/kg(Body).

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application bnQlMwQAy2diNb3II8iIYw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
  Date of Grant: 11/12/2015

Application Dated: 11/12/2015
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CM2XXNF
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth M.2 Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.467  
CC 15C 2402.0  -  2480.0 0.007  

Class II permissive : This change is to implement this module into Tablet (Product name : notebook, model numbers : EG20BA2 and EG20BI2) and Disable the frequency band from 5250-5350MHz and 5470-5825MHz by software. All other hardware are identical with original granted. The highest reported SAR value is 1.259 W/kg(Body).

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: