FCC ID TLZ-CU442

IEEE 802.11 b/g/n 1T1R WLAN and Bluetooth Low Energy Microcontroller Module

by AzureWave Technologies, Inc.

Grantee Code: TLZ   Product Code: CU442
Latest application date: 2022-12-21

FCC ID Device Details

FCC IDTLZ-CU442
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeTLZ
Product CodeCU442
Applicant BusinessAzureWave Technologies, Inc. 🇹🇼
Related Domains azurewave.com
Equipment ClassIEEE 802.11 b/g/n 1T1R WLAN and Bluetooth Low Energy Microcontroller Module
Test FirmSporton International Inc. Hsinchu Laboratory

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-12-21
2402-2480 MHzOriginal Equipment2020-07-30

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2020-10-28PDF 590.4 KB
Internal PhotosInternal Photos2022-12-21PDF 733.3 KB
Internal PhotosInternal Photos2020-10-28PDF 336.2 KB
External PhotosExternal Photos2022-12-21PDF 2.2 MB
External PhotosExternal Photos2020-10-28PDF 280 KB
Label InfoID Label/Location Info2020-07-30PDF 30.3 KB
TSUP 2.4GTest Setup Photos2022-12-21PDF 707.6 KB
TSUP BT 4.0Test Setup Photos2022-12-21PDF 706.4 KB
Tsup 2.4GTest Setup Photos2020-10-28PDF 428.5 KB
Tsup BTLETest Setup Photos2020-10-28PDF 428.5 KB
Test Report 2.4GTest Report2022-12-21PDF 1.4 MB
Test Report Antenna 1Test Report2022-12-21PDF 3.8 MB
Test Report Antenna 2Test Report2022-12-21PDF 338.4 KB
Test Report BT 4.0Test Report2022-12-21PDF 1.1 MB
Test Rpt 2.4GTest Report2020-07-30PDF 1.7 MB
Test Rpt BTLETest Report2020-07-30PDF 1.1 MB
SDoc Attestation LetterAttestation Statements2020-07-30PDF 99.2 KB
C2PC LetterCover Letter(s)2022-12-21PDF 573 KB
Modular Approval LetterCover Letter(s)2022-12-21PDF 91.3 KB
POA LetterCover Letter(s)2022-12-21PDF 507.4 KB
Confidentiality LetterCover Letter(s)2020-07-30PDF 125.4 KB
Module Approval RequestCover Letter(s)2020-07-30PDF 23.8 KB
POA LetterCover Letter(s)2020-07-30PDF 99.3 KB
RF Exposure MPERF Exposure Info2022-12-21PDF 386.5 KB
MPE ReportRF Exposure Info2020-07-30PDF 286.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 47.5 KB
Schematics Metadata onlySchematicsPDF 90.9 KB
Operational Description Metadata onlyOperational DescriptionPDF 48.3 KB

Application Information

Application ID7pGd3ZVouyCHsu8xjyXi+w==
Final Action Date2022-12-21
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0013946611
ModelCU442
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionIEEE 802.11 b/g/n 1T1R WLAN and Bluetooth Low Energy Microcontroller Module
Responsible PartyPatrick Lin, Director, patrick.lin@azurewave.com , 02-55995599
Test FirmAlex Chen, Sporton International Inc. Hsinchu Laboratory, alex@sporton.com.tw , +886-3-327-3456
TCB Emailtei@timcoengr.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsC2PC: Add a new model name AW-CU442-B1 and two Dipole antennas. Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

Applications

Application IDDatePurpose
7pGd3ZVouyCHsu8xjyXi+w==2022-12-21Class II permissive change or modification of presently authorized equipment
1nb4YOTZEo9EjaAzQRrfCA==2020-07-30Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.05315C
2412-2462 MHz0.24215C

Grants

TCB Grant - Application 7pGd3ZVouyCHsu8xjyXi+w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/21/2022

Application Dated: 12/21/2022
AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CU442
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 b/g/n 1T1R WLAN and Bluetooth Low Energy Microcontroller Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.242  
15C 2402.0  -  2480.0 0.053  

C2PC: Add a new model name AW-CU442-B1 and two Dipole antennas. Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

EAS Grant - Application 7pGd3ZVouyCHsu8xjyXi+w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
  Date of Grant: 12/21/2022

Application Dated: 12/21/2022
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CU442
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 b/g/n 1T1R WLAN and Bluetooth Low Energy Microcontroller Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.242  
15C 2402.0  -  2480.0 0.053  

C2PC: Add a new model name AW-CU442-B1 and two Dipole antennas. Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.



TCB Grant - Application 1nb4YOTZEo9EjaAzQRrfCA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 07/30/2020

Application Dated: 07/30/2020
AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CU442
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 b/g/n 1T1R WLAN and Bluetooth Low Energy Microcontroller Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.242  
15C 2402.0  -  2480.0 0.053  

Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

EAS Grant - Application 1nb4YOTZEo9EjaAzQRrfCA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

AzureWave Technologies, Inc.
8F., No. 94, Baozhong Rd.,
Xindian Dist., New Taipei City, 23144
Taiwan
  Date of Grant: 07/30/2020

Application Dated: 07/30/2020
 
Attention: Patrick Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TLZ-CU442
Name of Grantee:  AzureWave Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11 b/g/n 1T1R WLAN and Bluetooth Low Energy Microcontroller Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.242  
15C 2402.0  -  2480.0 0.053  

Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.



Mail To: