1. FCC ID
  2. TOU
  3. TOUC1004W2

FCC ID TOUC1004W2

10G GEPON ONU

by CommScope, Inc. of North Carolina

Grantee Code: TOU   Product Code: C1004W2
Latest application date: 2015-09-14

FCC ID Device Details

FCC IDTOUC1004W2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeTOU
Product CodeC1004W2
Applicant BusinessCommScope, Inc. of North Carolina 🇺🇸
Related Domains commscope.com
Equipment Class10G GEPON ONU
Test FirmGSTL Co.,Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2015-09-14
5180-5240 MHzOriginal Equipment2015-09-14

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2015-09-14PDF 3.2 MB
Internal PhotoInternal Photos2015-09-14PDF 127.7 KB
External PhotoExternal Photos2015-09-14PDF 79 KB
Lab & LocationID Label/Location Info2015-09-14PDF 113.5 KB
Label & LocationID Label/Location Info2015-09-14PDF 113.5 KB
Test Setup PhotoTest Setup Photos2015-09-14PDF 125.9 KB
Test Setup PhotoTest Setup Photos2015-09-14PDF 263.4 KB
Test ReportTest Report2015-09-14PDF 3.1 MB
Test ReportTest Report2015-09-14PDF 2.7 MB
Confidentiality Request LetterCover Letter(s)2015-09-14PDF 56.1 KB
Declaration LetterCover Letter(s)2015-09-14PDF 63.6 KB
Letter for understanding different FCC ID on DTS reportCover Letter(s)2015-09-14PDF 29.5 KB
POACover Letter(s)2015-09-14PDF 27.7 KB
Product Certification Representative Auth LetterCover Letter(s)2015-09-14PDF 77.2 KB
RF ExposureRF Exposure Info2015-09-14PDF 152.8 KB
Block Diagram Metadata onlyBlock DiagramPDF 220.1 KB
Schematics Metadata onlySchematicsPDF 621.4 KB
FCC Software Security Metadata onlyOperational DescriptionPDF 67.3 KB
Operational Description Metadata onlyOperational DescriptionPDF 547.2 KB

Application Information

Application IDjeDOxyiibkK7WQexlgHg0A==
Final Action Date2015-09-14
Application PurposeOriginal Equipment
Applicant FRN0014060362
ModelC1004W2
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description10G GEPON ONU
Responsible PartyIan Dancel, Applications Engineer, idancel@commscope.com , 828 323 4820
Test FirmUi-hyun Ryu, GSTL Co.,Ltd., rf@gstl.co.kr , 82-31-634-1800
TCB Emailtcb@siemic.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is the maximum combined conducted output power. Device is 3x3 MIMO configuration. This device has 20MHz & 40MHz signal bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-Users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
jeDOxyiibkK7WQexlgHg0A==2015-09-14Original Equipment
bbiVrKhPzdVrzAswlk7q3w==2015-09-14Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.152000015CCC, MO
5180-5240 MHz0.04815E38, CC, MO
5745-5825 MHz0.04915E38, CC, MO

Grants

TCB Grant - Application jeDOxyiibkK7WQexlgHg0A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
 Date of Grant: 09/14/2015

Application Dated: 09/11/2015
CommScope, Inc. of North Carolina
1100 CommScope Place, SE
Hickory, NC 28603
 
Attention: Ian Dancel , Applications Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TOUC1004W2
Name of Grantee:  CommScope, Inc. of North Carolina
Equipment Class: Digital Transmission System
Notes: 10G GEPON ONU
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.152  

Power listed is the maximum combined conducted output power.

Device is 3x3 MIMO configuration.

This device has 20MHz & 40MHz signal bandwidth mode.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-Users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application jeDOxyiibkK7WQexlgHg0A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CommScope, Inc. of North Carolina
1100 CommScope Place, SE
Hickory, NC 28603
United States 		  Date of Grant: 09/14/2015

Application Dated: 09/11/2015
 
Attention: Ian Dancel , Applications Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TOUC1004W2
Name of Grantee:  CommScope, Inc. of North Carolina
Equipment Class: Digital Transmission System
Notes: 10G GEPON ONU
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.152  

Power listed is the maximum combined conducted output power.

Device is 3x3 MIMO configuration.

This device has 20MHz & 40MHz signal bandwidth mode.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-Users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application bbiVrKhPzdVrzAswlk7q3w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
 Date of Grant: 09/14/2015

Application Dated: 09/11/2015
CommScope, Inc. of North Carolina
1100 CommScope Place, SE
Hickory, NC 28603
 
Attention: Ian Dancel , Applications Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TOUC1004W2
Name of Grantee:  CommScope, Inc. of North Carolina
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 10G GEPON ONU
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.048  
38 CC MO 15E 5745.0  -  5825.0 0.049  

Power listed is the maximum combined conducted output power.

Device is 3x3 MIMO configuration.

This device has 20MHz, 40MHz, & 80MHz signal bandwidth mode.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-Users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application bbiVrKhPzdVrzAswlk7q3w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CommScope, Inc. of North Carolina
1100 CommScope Place, SE
Hickory, NC 28603
United States 		  Date of Grant: 09/14/2015

Application Dated: 09/11/2015
 
Attention: Ian Dancel , Applications Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TOUC1004W2
Name of Grantee:  CommScope, Inc. of North Carolina
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 10G GEPON ONU
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.048  
38 CC MO 15E 5745.0  -  5825.0 0.049  

Power listed is the maximum combined conducted output power.

Device is 3x3 MIMO configuration.

This device has 20MHz, 40MHz, & 80MHz signal bandwidth mode.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-Users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: