FCC ID TTUCR870-2Q
JukeBlox Networked Media Module
by Bang & Olufsen a/s
Grantee Code: TTU Product Code: CR8702Q
Latest application date: 2013-12-27
FCC ID Device Details
| FCC ID | TTUCR870-2Q |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | TTU |
| Product Code | CR8702Q |
| Applicant Business | Bang & Olufsen a/s 🇩🇰 |
| Related Domains | |
| Equipment Class | JukeBlox Networked Media Module |
| Test Firm | Quietek Corporation |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2013-12-27 |
| 2412-2462 MHz | Original Equipment | 2011-11-14 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Revised user manual | Users Manual | 2011-11-14 | PDF 671.8 KB |
| user manual | Users Manual | 2011-11-14 | PDF 677.9 KB |
| Internal photo | Internal Photos | 2013-12-27 | PDF 1.8 MB |
| internal photo | Internal Photos | 2011-11-14 | PDF 943.1 KB |
| external photo | External Photos | 2011-11-14 | PDF 179.6 KB |
| ID label | ID Label/Location Info | 2011-11-14 | PDF 80.4 KB |
| Labe location info | ID Label/Location Info | 2011-11-14 | PDF 94 KB |
| Test setup photo | Test Setup Photos | 2013-12-27 | PDF 189.2 KB |
| test setup photo | Test Setup Photos | 2011-11-14 | PDF 259.7 KB |
| Test report | Test Report | 2013-12-27 | PDF 481.2 KB |
| test report rev | Test Report | 2011-11-14 | PDF 3.7 MB |
| ATTESTATION | Cover Letter(s) | 2013-12-27 | PDF 276.5 KB |
| attestation letter | Attestation Statements | 2011-11-14 | PDF 341.6 KB |
| About WiFi Channels 12 & 13 Declaration letter | Cover Letter(s) | 2013-12-27 | PDF 269.1 KB |
| Declaration of authorization | Cover Letter(s) | 2013-12-27 | PDF 312.2 KB |
| FCC Declaration of Class II Change | Cover Letter(s) | 2013-12-27 | PDF 340 KB |
| POA letter | Cover Letter(s) | 2011-11-14 | PDF 189.5 KB |
| cover letter_TTUCR870-2Q | Cover Letter(s) | 2011-11-14 | PDF 39.1 KB |
| declaration of authorization | Cover Letter(s) | 2011-11-14 | PDF 371.8 KB |
| long term confidentiality | Cover Letter(s) | 2011-11-14 | PDF 25.1 KB |
| modular approval request | Cover Letter(s) | 2011-11-14 | PDF 121.6 KB |
| RF Exposure | RF Exposure Info | 2013-12-27 | PDF 36.8 KB |
| revised RF exposure report | RF Exposure Info | 2011-11-14 | PDF 38.3 KB |
Application Information
| Application ID | pMOW5hq4cP7txbFriBLFAg== |
|---|---|
| Final Action Date | 2013-12-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0014285340 |
| Model | CR870-2Q |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | JukeBlox Networked Media Module |
| Responsible Party | Jesper Gregersen, Safety Manager, JEG@bang-olufsen.dk |
| Agent | Gene Gene Gene, QuieTek Corporation, gene@quietek.com |
| Technical Contact | Maggie Chen, QuieTek Corporation, maggiechen@quietek.com |
| Non-Technical Contact | Maggie Chen, QuieTek Corporation, maggiechen@quietek.com |
| Test Firm | Vincent Lin, Quietek Corporation, Vincent@quietek.com |
| TCB Email | certification@telefication.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| pMOW5hq4cP7txbFriBLFAg== | 2013-12-27 | Class II permissive change or modification of presently authorized equipment |
| zagTXmDpvT3v64zcnbcpGA== | 2011-11-14 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.1500000 | 15C |
Grants
TCB Grant - Application zagTXmDpvT3v64zcnbcpGA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Edisonstraat 12a Zevenaar, NL-6902 PK Netherlands |
Date of Grant: 11/14/2011 Application Dated: 11/11/2011 |
| Bang & Olufsen a/s |
| Peter Bangs Vej 15 |
| P.O. Box 40, |
| Struer, 7600 Denmark |
| Attention: Jesper Gregersen , Safety Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TTUCR870-2Q |
| Name of Grantee: | Bang & Olufsen a/s |
| Equipment Class: | Digital Transmission System |
| Notes: | JukeBlox Networked Media |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.15 |
| Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application zagTXmDpvT3v64zcnbcpGA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Bang & Olufsen a/s Peter Bangs Vej 15 P.O. Box 40, Struer, 7600 Denmark |
Date of Grant: 11/14/2011 Application Dated: 11/11/2011 |
| Attention: Jesper Gregersen , Safety Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TTUCR870-2Q |
| Name of Grantee: | Bang & Olufsen a/s |
| Equipment Class: | Digital Transmission System |
| Notes: | JukeBlox Networked Media |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.15 |
| Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Edisonstraat 12a Zevenaar, NL-6902 PK Netherlands |
Date of Grant: 12/27/2013 Application Dated: 12/18/2013 |
| Bang & Olufsen a/s |
| Peter Bangs Vej 15 |
| P.O. Box 40, |
| Struer, 7600 Denmark |
| Attention: Jesper Gregersen , Safety Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TTUCR870-2Q |
| Name of Grantee: | Bang & Olufsen a/s |
| Equipment Class: | Digital Transmission System |
| Notes: | JukeBlox Networked Media Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.15 |
| Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application pMOW5hq4cP7txbFriBLFAg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Bang & Olufsen a/s Peter Bangs Vej 15 P.O. Box 40, Struer, 7600 Denmark |
Date of Grant: 12/27/2013 Application Dated: 12/18/2013 |
| Attention: Jesper Gregersen , Safety Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TTUCR870-2Q |
| Name of Grantee: | Bang & Olufsen a/s |
| Equipment Class: | Digital Transmission System |
| Notes: | JukeBlox Networked Media Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.15 |
| Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |