FCC ID TV7R52

MINI PCI ADAPTER, ROUTER BOARD R52

by Mikrotikls SIA

Grantee Code: TV7   Product Code: R52
Latest application date: 2007-11-07

FCC ID Device Details

FCC IDTV7R52
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeTV7
Product CodeR52
Applicant BusinessMikrotikls SIA 🇱🇻
Related Domains mikrotik.com
Equipment ClassMINI PCI ADAPTER, ROUTER BOARD R52
Test FirmRogers Labs, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2007-11-07
5180-5320 MHzChange in identification of presently authorized equipment. Original FCC ID: TK4-05-WLM54AG Grant Date: 10/12/20052006-01-19
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: TK4-05-WLM54AG Grant Date: 10/12/20052006-01-19

Exhibits

DocumentTypeAvailableFile
USERS MANUALUsers Manual2007-11-07PDF 556.5 KB
users manualUsers Manual2006-01-19PDF 502.9 KB
internal photosInternal Photos2006-01-19PDF 170.9 KB
external photosExternal Photos2006-01-19PDF 170.9 KB
label sample and locationID Label/Location Info2006-01-19PDF 75.5 KB
block diagramBlock Diagram2006-01-19PDF 10.9 KB
scheamaticsSchematics2006-01-19PDF 1.2 MB
schematicsSchematics2006-01-19PDF 1.2 MB
TEST SETUP PHOTOSTest Setup Photos2007-11-07PDF 1.9 MB
TEST REPORTTest Report2007-11-07PDF 166.9 KB
test reportTest Report2006-01-19PDF 1.6 MB
COVER LETTERCover Letter(s)2007-11-07PDF 16.7 KB
permission letterCover Letter(s)2006-01-19PDF 87 KB
permission letterCover Letter(s)2006-01-19PDF 87 KB
RF EXPOSURERF Exposure Info2007-11-07PDF 27.1 KB
mpe infoRF Exposure Info2006-01-19PDF 36.7 KB

Application Information

Application IDSM1tiuGV0IHwZuNVzyvlgQ==
Final Action Date2007-11-07
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0014431100
ModelR52
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionMINI PCI ADAPTER, ROUTER BOARD R52
Responsible PartyEdmunds Zvegincevs, engineer, R&D;, edmundsz@mikrotik.com , +371 67317700
Test FirmScot Rogers, Rogers Labs, Inc., rogers@micoks.net , 913-837-3214
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited modular approval. Power listed is conducted. Approval is limited to OEM installation only for mobile operating configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this filing. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. +CC CLASS II CHANGE: This Class II Change adds additional antennas. This device, with these additional antenna(s), must be Professionally Installed, in a point-to-point application, as specified in this Class II Change for meeting RF exposure compliance requirements. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 65 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
SM1tiuGV0IHwZuNVzyvlgQ==2007-11-07Class II permissive change or modification of presently authorized equipment
iUHCCdEIu20KYZZeoa5ctA==2006-01-19Change in identification of presently authorized equipment. Original FCC ID: TK4-05-WLM54AG Grant Date: 10/12/2005
4ZCJaerD3K67CXfmn8LVDw==2006-01-19Change in identification of presently authorized equipment. Original FCC ID: TK4-05-WLM54AG Grant Date: 10/12/2005

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.03815CCC
2412-2462 MHz0.03815C
5180-5320 MHz0.027000015ECC
5740-5840 MHz0.03615C

Grants

TCB Grant - Application SM1tiuGV0IHwZuNVzyvlgQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 11/07/2007

Application Dated: 11/07/2007
Mikrotikls SIA
Pernavas 46
Riga, LV-1009
Latvia
 
Attention: Edmunds Zvegincevs , engineer, R&D

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TV7R52
Name of Grantee:  Mikrotikls SIA
Equipment Class: Digital Transmission System
Notes: MINI PCI ADAPTER, ROUTER BOARD R52
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.038  
15C 5740.0  -  5840.0 0.036  

Limited modular approval. Power listed is conducted. Approval is limited to OEM installation only for mobile operating configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this filing. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

+CC

CLASS II CHANGE: This Class II Change adds additional antennas. This device, with these additional antenna(s), must be Professionally Installed, in a point-to-point application, as specified in this Class II Change for meeting RF exposure compliance requirements. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 65 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


EAS Grant - Application SM1tiuGV0IHwZuNVzyvlgQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mikrotikls SIA
Pernavas 46
Riga, LV-1009
Latvia
  Date of Grant: 11/07/2007

Application Dated: 11/07/2007
 
Attention: Edmunds Zvegincevs , engineer, R&D

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TV7R52
Name of Grantee:  Mikrotikls SIA
Equipment Class: Digital Transmission System
Notes: MINI PCI ADAPTER, ROUTER BOARD R52
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.038  
15C 5740.0  -  5840.0 0.036  

Limited modular approval. Power listed is conducted. Approval is limited to OEM installation only for mobile operating configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this filing. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

+CC

CLASS II CHANGE: This Class II Change adds additional antennas. This device, with these additional antenna(s), must be Professionally Installed, in a point-to-point application, as specified in this Class II Change for meeting RF exposure compliance requirements. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 65 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application iUHCCdEIu20KYZZeoa5ctA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 01/19/2006

Application Dated: 01/19/2006
Mikrotikls SIA
Brivibas gatve 214i
Riga, LV-1039
Latvia
 
Attention: Edmunds Zvegincevs , engineer, R&D

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TV7R52
Name of Grantee:  Mikrotikls SIA
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: MPCI WIRELESS MODULE
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5320.0 0.027  

Limited modular approval. Power listed is conducted. Approval is limited to OEM installation only for mobile operating configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this filing. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operations in the band 5.15-5.25GHz are restricted to indoor usage only.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application iUHCCdEIu20KYZZeoa5ctA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mikrotikls SIA
Brivibas gatve 214i
Riga, LV-1039
Latvia
  Date of Grant: 01/19/2006

Application Dated: 01/19/2006
 
Attention: Edmunds Zvegincevs , engineer, R&D

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TV7R52
Name of Grantee:  Mikrotikls SIA
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: MPCI WIRELESS MODULE
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5320.0 0.027  

Limited modular approval. Power listed is conducted. Approval is limited to OEM installation only for mobile operating configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this filing. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Operations in the band 5.15-5.25GHz are restricted to indoor usage only.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 4ZCJaerD3K67CXfmn8LVDw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 01/19/2006

Application Dated: 01/19/2006
Mikrotikls SIA
Brivibas gatve 214i
Riga, LV-1039
Latvia
 
Attention: Edmunds Zvegincevs , engineer, R&D

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TV7R52
Name of Grantee:  Mikrotikls SIA
Equipment Class: Digital Transmission System
Notes: MPCI WIRELESS MODULE
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.038  
15C 5740.0  -  5840.0 0.036  

Limited modular approval. Power listed is conducted. Approval is limited to OEM installation only for mobile operating configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this filing. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 4ZCJaerD3K67CXfmn8LVDw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mikrotikls SIA
Brivibas gatve 214i
Riga, LV-1039
Latvia
  Date of Grant: 01/19/2006

Application Dated: 01/19/2006
 
Attention: Edmunds Zvegincevs , engineer, R&D

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TV7R52
Name of Grantee:  Mikrotikls SIA
Equipment Class: Digital Transmission System
Notes: MPCI WIRELESS MODULE
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.038  
15C 5740.0  -  5840.0 0.036  

Limited modular approval. Power listed is conducted. Approval is limited to OEM installation only for mobile operating configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this filing. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: