FCC ID TVV-PIAP

Pronto Intelligent Access Point

by Pronto Networks, Inc

Grantee Code: TVV   Product Code: PIAP
Latest application date: 2015-10-06

FCC ID Device Details

FCC IDTVV-PIAP
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeTVV
Product CodePIAP
Applicant BusinessPronto Networks, Inc 🇺🇸
Related Domains prontonetworks.com
Equipment ClassPronto Intelligent Access Point
Test FirmShenzhen WST Testing Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2015-10-06

Exhibits

DocumentTypeAvailableFile
AddendumUsers Manual2015-10-06PDF 21.3 KB
Manual r1Users Manual2015-10-06PDF 1.1 MB
IntInternal Photos2015-10-06PDF 2.7 MB
ExtExternal Photos2015-10-06PDF 1.3 MB
LabelID Label/Location Info2015-10-06PDF 220.7 KB
SetupTest Setup Photos2015-10-06PDF 649.7 KB
NII 1 r1Test Report2015-10-06PDF 3.8 MB
NII 2 r1Test Report2015-10-06PDF 1.4 MB
NII 3 r1Test Report2015-10-06PDF 2.7 MB
AuthorizationCover Letter(s)2015-10-06PDF 68.8 KB
DofCCover Letter(s)2015-10-06PDF 602.1 KB
Software Control DeclarationCover Letter(s)2015-10-06PDF 121.7 KB
RFxRF Exposure Info2015-10-06PDF 122.1 KB
Block Metadata onlyBlock DiagramPDF 55.2 KB
Schema Metadata onlySchematicsPDF 272.5 KB
Chipset Metadata onlyOperational DescriptionPDF 3.6 MB
Ops Metadata onlyOperational DescriptionPDF 201 KB
Software Security Info Metadata onlySDR Software/Security InfPDF 295.4 KB

Application Information

Application IDpzCHnZHb/TfX7PBRadmhGQ==
Final Action Date2015-10-06
Application PurposeOriginal Equipment
Applicant FRN0018069708
ModelPIAP
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionPronto Intelligent Access Point
Responsible PartyJasbir Singh, CEO, Jas@prontonetworks.com , 925-860-6203
Technical ContactMark Koop, Teleconformity, mark.koop@teleconformity.com , (31)848395876
Test FirmLong Zhou, Shenzhen WST Testing Technology Co., Ltd., Alan@wstlab.com , 86-755-33916437
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device transmits on 20MHz and 40MHz bandwidths.

Applications

Application IDDatePurpose
pzCHnZHb/TfX7PBRadmhGQ==2015-10-06Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
5180-5240 MHz0.0487515E20, 38
5745-5825 MHz0.0164115E20, 38

Grants

TCB Grant - Application pzCHnZHb/TfX7PBRadmhGQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 10/06/2015

Application Dated: 08/29/2015
Pronto Networks, Inc
1966 Tice Valley Boulevard #411
Walnut Creek, CA 94595
 
Attention: Jasbir Singh , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TVV-PIAP
Name of Grantee:  Pronto Networks, Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Pronto Intelligent Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 38 15E 5180.0  -  5240.0 0.04875  
20 38 15E 5745.0  -  5825.0 0.01641  

Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device transmits on 20MHz and 40MHz bandwidths.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.

EAS Grant - Application pzCHnZHb/TfX7PBRadmhGQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Pronto Networks, Inc
1966 Tice Valley Boulevard #411
Walnut Creek, CA 94595
United States
  Date of Grant: 10/06/2015

Application Dated: 08/29/2015
 
Attention: Jasbir Singh , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TVV-PIAP
Name of Grantee:  Pronto Networks, Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Pronto Intelligent Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 38 15E 5180.0  -  5240.0 0.04875  
20 38 15E 5745.0  -  5825.0 0.01641  

Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device transmits on 20MHz and 40MHz bandwidths.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.

Mail To: