FCC ID TWYIPJR1000
RFID Reader
by Impinj, Inc.
Grantee Code: TWY Product Code: IPJR1000
Latest application date: 2009-04-15
FCC ID Device Details
| FCC ID | TWYIPJR1000 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | TWY |
| Product Code | IPJR1000 |
| Applicant Business | Impinj, Inc. 🇺🇸 |
| Equipment Class | RFID Reader |
| Test Firm | CKC Laboratories, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902-928 MHz | Class II permissive change or modification of presently authorized equipment | 2009-04-15 |
| 902-928 MHz | Class II permissive change or modification of presently authorized equipment | 2008-06-12 |
| 902-928 MHz | Class II permissive change or modification of presently authorized equipment | 2008-01-24 |
| 902-928 MHz | Class II permissive change or modification of presently authorized equipment | 2007-05-02 |
| 902-928 MHz | Class II permissive change or modification of presently authorized equipment | 2007-03-22 |
| 902-928 MHz | Class II permissive change or modification of presently authorized equipment | 2006-06-26 |
| 902-928 MHz | Original Equipment | 2006-02-14 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2009-04-15 | PDF 1.9 MB |
| Users Manual | Users Manual | 2008-06-12 | PDF 1.9 MB |
| Users Manual | Users Manual | 2007-05-02 | PDF 1.2 MB |
| Users Manual | Users Manual | 2007-03-22 | PDF 1.1 MB |
| Users Manual | Users Manual | 2006-02-14 | PDF 659.7 KB |
| Internal Photos 1 | Internal Photos | 2006-06-26 | PDF 234.8 KB |
| Internal Photos 2 | Internal Photos | 2006-06-26 | PDF 297.5 KB |
| Internal Photos | Internal Photos | 2006-02-14 | PDF 335 KB |
| Antenna Photos | External Photos | 2009-04-15 | PDF 106.5 KB |
| External Photos | External Photos | 2009-04-15 | PDF 553.3 KB |
| Antenna Photos | External Photos | 2008-06-12 | PDF 106.5 KB |
| External Photos | External Photos | 2007-03-22 | PDF 260 KB |
| External Photos | External Photos | 2006-02-14 | PDF 131.5 KB |
| ID Label Location | ID Label/Location Info | 2009-04-15 | PDF 410.1 KB |
| Id Label Location | ID Label/Location Info | 2008-06-12 | PDF 410.1 KB |
| ID Label | ID Label/Location Info | 2006-02-14 | PDF 96.2 KB |
| Operational Description | Operational Description | 2008-06-12 | PDF 18.9 KB |
| Operational Description 1 | Operational Description | 2006-02-14 | PDF 27.2 KB |
| Test Setup Photos | Test Setup Photos | 2009-04-15 | PDF 66.2 KB |
| New Test Setup Photos | Test Setup Photos | 2008-06-12 | PDF 66.2 KB |
| Test Setup Photos | Test Setup Photos | 2008-01-24 | PDF 83 KB |
| Test Setup Photos | Test Setup Photos | 2007-05-02 | PDF 571 KB |
| Test Setup Photos | Test Setup Photos | 2007-03-22 | PDF 192.9 KB |
| Test Setup Photos | Test Setup Photos | 2006-06-26 | PDF 470.2 KB |
| Test Setup Photos | Test Setup Photos | 2006-02-14 | PDF 1 MB |
| Test Report 1 | Test Report | 2009-04-15 | PDF 893.3 KB |
| Test Report 2 | Test Report | 2009-04-15 | PDF 372.7 KB |
| Updated Test Report | Test Report | 2008-06-12 | PDF 1.2 MB |
| Test Measurements | Test Report | 2008-01-24 | PDF 748.6 KB |
| Test Report | Test Report | 2008-01-24 | PDF 774 KB |
| Test Report | Test Report | 2007-05-02 | PDF 1.5 MB |
| Test Report | Test Report | 2007-03-22 | PDF 682.4 KB |
| Test Report 1 | Test Report | 2006-06-26 | PDF 923.5 KB |
| Test Report 2 | Test Report | 2006-06-26 | PDF 977.4 KB |
| Test Report | Test Report | 2006-02-14 | PDF 1.8 MB |
| Authorization Letter | Cover Letter(s) | 2009-04-15 | PDF 163.2 KB |
| PC II Letter | Cover Letter(s) | 2009-04-15 | PDF 112.1 KB |
| TCB Correspondance | Cover Letter(s) | 2009-04-15 | PDF 52.9 KB |
| PC II Letter | Cover Letter(s) | 2008-06-12 | PDF 18.5 KB |
| Confidentiality Letter | Cover Letter(s) | 2008-01-24 | PDF 17.6 KB |
| Cover letter | Cover Letter(s) | 2008-01-24 | PDF 19 KB |
| Permissive Change Letter | Cover Letter(s) | 2008-01-24 | PDF 30.7 KB |
| Response to Correspendence 34436 | Cover Letter(s) | 2008-01-24 | PDF 59.7 KB |
| FCC Correspondance | Cover Letter(s) | 2007-05-02 | PDF 6.9 KB |
| Permissive Change Letter | Cover Letter(s) | 2007-05-02 | PDF 21.6 KB |
| Professional Installation | Cover Letter(s) | 2007-05-02 | PDF 937.5 KB |
| TCB Correspondance | Cover Letter(s) | 2007-05-02 | PDF 12.5 KB |
| Permissive Change Letter | Cover Letter(s) | 2007-03-22 | PDF 15.9 KB |
| Read Me First Letter | Cover Letter(s) | 2007-03-22 | PDF 38.2 KB |
| TCB Correspondance | Cover Letter(s) | 2007-03-22 | PDF 46.7 KB |
| Confidentiality Letter | Cover Letter(s) | 2006-06-26 | PDF 19.9 KB |
| Permissive change | Cover Letter(s) | 2006-06-26 | PDF 933 KB |
| TCB Response | Cover Letter(s) | 2006-06-26 | PDF 33.6 KB |
| Confidentiality Letter | Cover Letter(s) | 2006-02-14 | PDF 19.1 KB |
| Response | Cover Letter(s) | 2006-02-14 | PDF 34 KB |
| TCB Correspondence | Cover Letter(s) | 2006-02-14 | PDF 16.6 KB |
| Block Diagram Metadata only | Block Diagram | PDF 638 KB | |
| Block diagram Metadata only | Block Diagram | PDF 1.6 MB | |
| Schematics Metadata only | Schematics | PDF 739.2 KB | |
| Schematics Metadata only | Schematics | PDF 811.4 KB | |
| Design Change Description Metadata only | Operational Description | PDF 50.2 KB | |
| Operational Description 1 Metadata only | Operational Description | PDF 55.9 KB | |
| Operational Description 2 Metadata only | Operational Description | PDF 55.5 KB | |
| Operational Description 2 Metadata only | Operational Description | PDF 53.3 KB | |
| Operational Description 3 Metadata only | Operational Description | PDF 58.1 KB | |
| Operational Description 3 Metadata only | Operational Description | PDF 53.1 KB | |
| Operational Description 4 Metadata only | Operational Description | PDF 57.6 KB | |
| Parts List BOM Metadata only | Parts List/Tune Up Info | PDF 79.8 KB |
Application Information
| Application ID | TkKHG5ddhHJIXseXGgHgvg== |
|---|---|
| Final Action Date | 2009-04-15 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0014497192 |
| Model | IPJR1000 |
| Frequency Range | 902-928 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | RFID Reader |
| Responsible Party | Bill Ashley, bill.ashley@gmail.com  , 206-834-1116 |
| Agent | Jessina Jessina Jessina, CKC Certification Services, LLC, TCBAdmin@ckccertification.com  , 209-966-5240 |
| Technical Contact | Jessina Hunter, CKC Certification Services, LLC, TCBAdmin@ckccertificaiton.com  , 209-966-5240 |
| Test Firm | Steve Behm, CKC Laboratories, Inc., reports@ckc.com  , 425-402-1717 |
| TCB Email | TCB@ckccertification.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC to add Antenna. Power listed is conducted. Professional Installation Required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| TkKHG5ddhHJIXseXGgHgvg== | 2009-04-15 | Class II permissive change or modification of presently authorized equipment |
| oNel09kk3WW6VSr2kS0fog== | 2008-06-12 | Class II permissive change or modification of presently authorized equipment |
| RRHFqmiRLgSfweNEynUDWw== | 2008-01-24 | Class II permissive change or modification of presently authorized equipment |
| JDfz73koGrHXtmlHVfVAww== | 2007-05-02 | Class II permissive change or modification of presently authorized equipment |
| xPVmfdSKcGdmNEe2hSoPXw== | 2007-03-22 | Class II permissive change or modification of presently authorized equipment |
| C0M9hkB/u4mhBtJIDh7bMA== | 2006-06-26 | Class II permissive change or modification of presently authorized equipment |
| Mh3ZczF7mEIXNdV9QzEDXw== | 2006-02-14 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application xPVmfdSKcGdmNEe2hSoPXw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 | Date of Grant: 03/22/2007 Application Dated: 03/12/2007 |
| Impinj, Inc. |
| 701 N. 34th St. |
| Suite 300 |
| Seattle, WA 98103 |
| Attention: Bill Ashley |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TWYIPJR1000 |
| Name of Grantee: | Impinj, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.0 - 928.0 | 0.9772 |
| C2PC to add antennas. Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
EAS Grant - Application xPVmfdSKcGdmNEe2hSoPXw==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Impinj, Inc. 701 N. 34th St. Suite 300 Seattle, WA 98103 United States | Date of Grant: 03/22/2007 Application Dated: 03/12/2007 |
| Attention: Bill Ashley |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TWYIPJR1000 |
| Name of Grantee: | Impinj, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.0 - 928.0 | 0.9772 |
| C2PC to add antennas. Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing.
|
| Mail To: |
| EA607320 |
TCB Grant - Application TkKHG5ddhHJIXseXGgHgvg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 04/15/2009 Application Dated: 04/10/2009 |
| Impinj, Inc. |
| 701 N. 34th St. |
| Suite 300 |
| Seattle, WA 98103 |
| Attention: Bill Ashley |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TWYIPJR1000 |
| Name of Grantee: | Impinj, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 | 15C | 902.0 - 928.0 | 1.0 |
| C2PC to add Antenna. Power listed is conducted. Professional Installation Required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
EAS Grant - Application TkKHG5ddhHJIXseXGgHgvg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Impinj, Inc. 701 N. 34th St. Suite 300 Seattle, WA 98103 United States |
Date of Grant: 04/15/2009 Application Dated: 04/10/2009 |
| Attention: Bill Ashley |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TWYIPJR1000 |
| Name of Grantee: | Impinj, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 | 15C | 902.0 - 928.0 | 1.0 |
| C2PC to add Antenna. Power listed is conducted. Professional Installation Required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Impinj, Inc. 400 Fairview Ave N. Suite 1200 Seattle, WA 98109 United States |
Date of Grant: 01/24/2008 Application Dated: 10/17/2007 |
| Attention: Bill Ashley |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TWYIPJR1000 |
| Name of Grantee: | Impinj, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 | 15C | 902.0 - 928.0 | 1.0 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing.
|
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mary Ellen Clayton, Report Writer | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| CKC Laboratories | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5046 Sierra Pines Drive | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mariposa, CA 95338 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 06/12/2008 Application Dated: 06/05/2008 |
| Impinj, Inc. |
| 701 N. 34th St. |
| Suite 300 |
| Seattle, WA 98103 |
| Attention: Bill Ashley |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TWYIPJR1000 |
| Name of Grantee: | Impinj, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 | 15C | 902.0 - 928.0 | 1.0 |
| C2PC to add Antenna. Power listed is conducted. Professional Installation Required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
EAS Grant - Application oNel09kk3WW6VSr2kS0fog==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Impinj, Inc. 701 N. 34th St. Suite 300 Seattle, WA 98103 United States |
Date of Grant: 06/12/2008 Application Dated: 06/05/2008 |
| Attention: Bill Ashley |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TWYIPJR1000 |
| Name of Grantee: | Impinj, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 | 15C | 902.0 - 928.0 | 1.0 |
| C2PC to add Antenna. Power listed is conducted. Professional Installation Required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 02/14/2006 Application Dated: 02/13/2006 |
| Impinj, Inc. |
| 400 Fairview Ave N. |
| Suite 1200 |
| Seattle, WA 98109 |
| Attention: Bill Ashley |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TWYIPJR1000 |
| Name of Grantee: | Impinj, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Speedway Reader |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.0 - 928.0 | 0.9772 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing.
|
EAS Grant - Application Mh3ZczF7mEIXNdV9QzEDXw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Impinj, Inc. 400 Fairview Ave N. Suite 1200 Seattle, WA 98109 United States |
Date of Grant: 02/14/2006 Application Dated: 02/13/2006 |
| Attention: Bill Ashley |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TWYIPJR1000 |
| Name of Grantee: | Impinj, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Speedway Reader |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.0 - 928.0 | 0.9772 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing.
|
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 | Date of Grant: 05/02/2007 Application Dated: 04/27/2007 |
| Impinj, Inc. |
| 701 N. 34th St. |
| Suite 300 |
| Seattle, WA 98103 |
| Attention: Bill Ashley |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TWYIPJR1000 |
| Name of Grantee: | Impinj, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 | 15C | 902.0 - 928.0 | 1.0 |
| C2PC to add specified cable. Power listed is conducted. Professional Installation Required. Equipment authorization valid when professionally installed and using specified cable of substantially similar type and characteristics as listed in this filing. Minimum cable loss 2.5dB. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
EAS Grant - Application JDfz73koGrHXtmlHVfVAww==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Impinj, Inc. 701 N. 34th St. Suite 300 Seattle, WA 98103 United States | Date of Grant: 05/02/2007 Application Dated: 04/27/2007 |
| Attention: Bill Ashley |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TWYIPJR1000 |
| Name of Grantee: | Impinj, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 | 15C | 902.0 - 928.0 | 1.0 |
| C2PC to add specified cable. Power listed is conducted. Professional Installation Required. Equipment authorization valid when professionally installed and using specified cable of substantially similar type and characteristics as listed in this filing. Minimum cable loss 2.5dB. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing.
|
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| Mail To: |
| EA794565 |
TCB Grant - Application C0M9hkB/u4mhBtJIDh7bMA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 06/26/2006 Application Dated: 06/26/2006 |
| Impinj, Inc. |
| 400 Fairview Ave N. |
| Suite 1200 |
| Seattle, WA 98109 |
| Attention: Bill Ashley |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TWYIPJR1000 |
| Name of Grantee: | Impinj, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Speedway Reader |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.0 - 928.0 | 0.9332 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
EAS Grant - Application C0M9hkB/u4mhBtJIDh7bMA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Impinj, Inc. 400 Fairview Ave N. Suite 1200 Seattle, WA 98109 United States |
Date of Grant: 06/26/2006 Application Dated: 06/26/2006 |
| Attention: Bill Ashley |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TWYIPJR1000 |
| Name of Grantee: | Impinj, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Speedway Reader |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.0 - 928.0 | 0.9332 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for use with antenna(s) as listed in this filing. |
| Mail To: |