FCC ID TX2-RTL8187

802.11b/g RTL8187 miniCard

by Realtek Semiconductor Corp.

Grantee Code: TX2   Product Code: RTL8187
Latest application date: 2006-08-08

FCC ID Device Details

FCC IDTX2-RTL8187
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeTX2
Product CodeRTL8187
Applicant BusinessRealtek Semiconductor Corp. 🇹🇼
Related Domains realtek.com
Equipment Class802.11b/g RTL8187 miniCard
Test FirmSporton International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2006-08-08

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2006-08-08PDF 1.4 MB
Internal PhotoInternal Photos2006-08-08PDF 251.3 KB
External PhotoExternal Photos2006-08-08PDF 288.7 KB
Label InfoID Label/Location Info2006-08-08PDF 115.4 KB
Test Setup PhotoTest Setup Photos2006-08-08PDF 487.6 KB
Test ReportTest Report2006-08-08PDF 2.7 MB
Confidentiality Request LetterCover Letter(s)2006-08-08PDF 211.4 KB
LMA LetterCover Letter(s)2006-08-08PDF 47.5 KB
MPERF Exposure Info2006-08-08PDF 57.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 558.2 KB
Schematics Metadata onlySchematicsPDF 65.9 KB
Operational Description Metadata onlyOperational DescriptionPDF 82 KB

Application Information

Application IDfSIdEOjyH1cNshmBUTGJgA==
Final Action Date2006-08-08
Application PurposeOriginal Equipment
Applicant FRN0020109807
ModelRTL8187
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11b/g RTL8187 miniCard
Responsible PartyDana Liaw, Project Manager, danaliaw@realtek.com , 886-3-5780211
Technical ContactWayne Hsu, Sporton International Inc., wayne@sporton.com.tw
Test FirmKathy Lin, Sporton International Inc., Kathy@sporton.com.tw , 886-2-2696-2468
TCB Emailholger.bentje@phoenix-testlab.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Applications

Application IDDatePurpose
fSIdEOjyH1cNshmBUTGJgA==2006-08-08Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.111000015C

Grants

TCB Grant - Application fSIdEOjyH1cNshmBUTGJgA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 08/08/2006

Application Dated: 08/08/2006
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8187
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Digital Transmission System
Notes: 802.11b/g RTL8187 miniCard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.111  

Limited Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

EAS Grant - Application fSIdEOjyH1cNshmBUTGJgA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 08/08/2006

Application Dated: 08/08/2006
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8187
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Digital Transmission System
Notes: 802.11b/g RTL8187 miniCard
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.111  

Limited Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.



Mail To: