FCC ID TX2-RTL8197D-11AC

802.11a/b/g/n/ac RTL8197D+RTL8192CE+RTL8812AR AP Router

by Realtek Semiconductor Corp.

Grantee Code: TX2   Product Code: RTL8197D11AC
Latest application date: 2013-01-04

FCC ID Device Details

FCC IDTX2-RTL8197D-11AC
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeTX2
Product CodeRTL8197D11AC
Applicant BusinessRealtek Semiconductor Corp. 🇹🇼
Related Domains realtek.com sporton.com.tw
Equipment Class802.11a/b/g/n/ac RTL8197D+RTL8192CE+RTL8812AR AP Router
Test FirmSporton International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2013-01-04
2412-2462 MHzOriginal Equipment2013-01-04

Exhibits

DocumentTypeAvailableFile
user manualUsers Manual2013-07-03PDF 333.7 KB
internal photoInternal Photos2013-07-03PDF 585.2 KB
external photoExternal Photos2013-07-03PDF 547.7 KB
ID label/Location infoID Label/Location Info2013-01-04PDF 40.2 KB
test setup photoTest Setup Photos2013-07-03PDF 344.3 KB
Co-location Test ReportTest Report2013-01-04PDF 100.7 KB
Test ReportTest Report2013-01-04PDF 1.4 MB
Test ReportTest Report2013-01-04PDF 2.2 MB
DoC letterCover Letter(s)2013-01-04PDF 58.7 KB
confidentialityCover Letter(s)2013-01-04PDF 76.3 KB
declaration of authorizationCover Letter(s)2013-01-04PDF 59.6 KB
RF exposure infoRF Exposure Info2013-01-04PDF 90.6 KB

Application Information

Application IDqFflPnIcttd0L71gUippNQ==
Final Action Date2013-01-04
Application PurposeOriginal Equipment
Applicant FRN0020109807
Model-RTL8197D-11AC
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description802.11a/b/g/n/ac RTL8197D+RTL8192CE+RTL8812AR AP Router
Responsible PartyDana Liaw, Project Manager, danaliaw@realtek.com , 886-3-5780211
AgentLeo Leo Leo, Sporton International Inc, leohuang@sporton.com.tw
Technical ContactSharon Jiang, Sporton International Inc, sharonjiang@Sporton.com.tw , 886-3-656-9065
Non-Technical ContactSharon Jiang, Sporton International Inc, sharonjiang@Sporton.com.tw
Test FirmAlex Chen, Sporton International Inc., alex@sporton.com.tw , 886-3-327-3456
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date07/03/2013
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20/40 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210 MHz. Operations in 5150-5250 MHz band is for indoor use only.

Applications

Application IDDatePurpose
qFflPnIcttd0L71gUippNQ==2013-01-04Original Equipment
C76BMR0NaFmrxMVVWkwQRg==2013-01-04Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.2515CCC, MO
5180-5240 MHz0.050000015ECC, MO
5745-5825 MHz0.2715CCC, MO

Grants

TCB Grant - Application qFflPnIcttd0L71gUippNQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Edisonstraat 12a
Zevenaar, NL-6902 PK
Netherlands
Date of Grant: 01/04/2013

Application Dated: 01/03/2013
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8197D-11AC
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n/ac RTL8197D+RTL8192CE+RTL8812AR AP Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.05  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20/40 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210 MHz.

Operations in 5150-5250 MHz band is for indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application qFflPnIcttd0L71gUippNQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 01/04/2013

Application Dated: 01/03/2013
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8197D-11AC
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n/ac RTL8197D+RTL8192CE+RTL8812AR AP Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.05  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20/40 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210 MHz.

Operations in 5150-5250 MHz band is for indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application C76BMR0NaFmrxMVVWkwQRg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Edisonstraat 12a
Zevenaar, NL-6902 PK
Netherlands
Date of Grant: 01/04/2013

Application Dated: 01/03/2013
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8197D-11AC
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n/ac RTL8197D+RTL8192CE+RTL8812AR AP Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.25  
CC MO 15C 5745.0  -  5825.0 0.27  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20/40 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5775 MHz.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application C76BMR0NaFmrxMVVWkwQRg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 01/04/2013

Application Dated: 01/03/2013
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8197D-11AC
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n/ac RTL8197D+RTL8192CE+RTL8812AR AP Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.25  
CC MO 15C 5745.0  -  5825.0 0.27  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20/40 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5775 MHz.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: