FCC ID TX2-RTL8822C

The highest reported SAR values for body, simultaneous transmission and extremity (hand), use conditions < 0.1 W/kg, 1.06 W/kg and < 0.1 W/kg (10g) respectively.

Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

The highest reported SAR values for body, simultaneous transmission and extremity (hand), use conditions < 0.1 W/kg, 1.06 W/kg and < 0.1 W/kg (10g) respectively.

Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Class II Permissive Change to request approval for Portable category Configuration. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 0.82W/kg, respectively.

This module is approved in portable configurations with antenna REALTEK reference Antenna and Type PIFA at 5mm minimum test separation distance.

Class II Permissive Change to request approval for Portable category Configuration. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 0.82W/kg, respectively.

This module is approved in portable configurations with antenna REALTEK reference Antenna and Type PIFA at 5mm minimum test separation distance.

This C2PC filing establishes portable category for Dynabook platform with models: SATELLITE C50D-B and SATELLITE PRO C50D-B, along with the antennas (main and aux) that are of the similar type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.14 W/kg and 1.16 W/kg, respectively.

This C2PC filing establishes portable category for Dynabook platform with models: SATELLITE C50D-B and SATELLITE PRO C50D-B, along with the antennas (main and aux) that are of the similar type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.14 W/kg and 1.16 W/kg, respectively.

Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS CM5500FD,CL5500FD, CM5500FDA and CL5500FDA with antenna AWAN, part no. AYF6Y-100048 andAYF6Y-100049.

The highest reported reported Body and Simultaneous SAR values are 0.97 W/kg and1.34 W/kg.

Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS CM5500FD,CL5500FD, CM5500FDA and CL5500FDA with antenna AWAN, part no. AYF6Y-100048 andAYF6Y-100049.

The highest reported reported Body and Simultaneous SAR values are 0.97 W/kg and1.34 W/kg.

Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: CM1400FX and CL1400FX, with antenna AWAN, part no. AYP6Y-100178 and AYP6Y-100179.

The highest reported Body and Simultaneous SAR values are 1.14W/kg and 1.22W/kg respectively.

Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: CM1400FX and CL1400FX, with antenna AWAN, part no. AYP6Y-100178 and AYP6Y-100179.

The highest reported Body and Simultaneous SAR values are 1.14W/kg and 1.22W/kg respectively.

Class II Permissive Change to request approval for Portable category Configuration. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are <0.10W/kg and 0.88W/kg, respectively.

This module is approved in portable configurations with antenna REALTEK reference Antenna and Type PIFA at 5mm minimum test separation distance.

Class II Permissive Change to request approval for Portable category Configuration. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are <0.10W/kg and 0.88W/kg, respectively.

This module is approved in portable configurations with antenna REALTEK reference Antenna and Type PIFA at 5mm minimum test separation distance.

Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS CM5500FD,CL5500FD, CM5500FDA and CL5500FDA with antenna AWAN, part no. AYF6Y-100048 andAYF6Y-100049.

The highest reported reported Body and Simultaneous SAR values are 1.19 W/kg and 1.33 W/kg.

Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS CM5500FD,CL5500FD, CM5500FDA and CL5500FDA with antenna AWAN, part no. AYF6Y-100048 andAYF6Y-100049.

The highest reported reported Body and Simultaneous SAR values are 1.19 W/kg and 1.33 W/kg.

Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: CM1400FX and CL1400FX, with antenna AWAN, part no. AYP6Y-100178 and AYP6Y-100179.

The highest reported Body and Simultaneous SAR values are 0.99W/kg and 1.58W/kg respectively.

Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: CM1400FX and CL1400FX, with antenna AWAN, part no. AYP6Y-100178 and AYP6Y-100179.

The highest reported Body and Simultaneous SAR values are 0.99W/kg and 1.58W/kg respectively.

The highest reported SAR values for body, simultaneous transmission and extremity (hand), use conditions < 0.1 W/kg, 0.88 W/kg and < 0.1 W/kg (10g) respectively.

Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

The highest reported SAR values for body, simultaneous transmission and extremity (hand), use conditions < 0.1 W/kg, 0.88 W/kg and < 0.1 W/kg (10g) respectively.

Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

This C2PC filing establishes portable category for Dynabook platform with models: SATELLITE C50D-B and SATELLITE PRO C50D-B, along with the antennas (main and aux) that are of the similar type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03 W/kg and 1.16 W/kg, respectively.

This C2PC filing establishes portable category for Dynabook platform with models: SATELLITE C50D-B and SATELLITE PRO C50D-B, along with the antennas (main and aux) that are of the similar type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03 W/kg and 1.16 W/kg, respectively.

Class II Permissive Change to request approval for Portable category Configuration. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 0.88W/kg, respectively.

This module is approved in portable configurations with antenna REALTEK reference Antenna and Type PIFA at 5mm minimum test separation distance.

Class II Permissive Change to request approval for Portable category Configuration. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 0.88W/kg, respectively.

This module is approved in portable configurations with antenna REALTEK reference Antenna and Type PIFA at 5mm minimum test separation distance.

The highest reported SAR values for body, simultaneous transmission and extremity (hand), use conditions 1.06 W/kg, 1.06 W/kg and 0.98 W/kg (10g) respectively.

Power listed is maximum combined conducted output power. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

The highest reported SAR values for body, simultaneous transmission and extremity (hand), use conditions 1.06 W/kg, 1.06 W/kg and 0.98 W/kg (10g) respectively.

Power listed is maximum combined conducted output power. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

The highest reported SAR values for body, simultaneous transmission and extremity (hand), use conditions 0.93 W/kg, 0.93 W/kg and 0.83 W/kg (10g) respectively.

Power listed is maximum combined conducted output power. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

The highest reported SAR values for body, simultaneous transmission and extremity (hand), use conditions 0.93 W/kg, 0.93 W/kg and 0.83 W/kg (10g) respectively.

Power listed is maximum combined conducted output power. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

The highest reported SAR values for body, simultaneous transmission and extremity (hand), use conditions 0.70 W/kg, 1.12 W/kg and 0.39 W/kg (10g) respectively.

Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

The highest reported SAR values for body, simultaneous transmission and extremity (hand), use conditions 0.70 W/kg, 1.12 W/kg and 0.39 W/kg (10g) respectively.

Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS CM5500FD,CL5500FD, CM5500FDA and CL5500FDA with antenna AWAN, part no. AYF6Y-100048 andAYF6Y-100049.

The highest reported reported Body and Simultaneous SAR values are 0.14 W/kg and 1.33 W/kg.

Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS CM5500FD,CL5500FD, CM5500FDA and CL5500FDA with antenna AWAN, part no. AYF6Y-100048 andAYF6Y-100049.

The highest reported reported Body and Simultaneous SAR values are 0.14 W/kg and 1.33 W/kg.

Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: CM1400FX and CL1400FX, with antenna AWAN, part no. AYP6Y-100178 and AYP6Y-100179.

The highest reported Body and Simultaneous SAR values are <0.10W/kg and 1.22W/kg respectively.

Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: CM1400FX and CL1400FX, with antenna AWAN, part no. AYP6Y-100178 and AYP6Y-100179.

The highest reported Body and Simultaneous SAR values are <0.10W/kg and 1.22W/kg respectively.

The highest reported SAR values for body, simultaneous transmission and extremity (hand), use conditions 0.89 W/kg, 0.89 W/kg and 0.45 W/kg (10g) respectively.

Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

The highest reported SAR values for body, simultaneous transmission and extremity (hand), use conditions 0.89 W/kg, 0.89 W/kg and 0.45 W/kg (10g) respectively.

Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.