FCC ID TX2-RTL8187SE
802.11b/g RTL8187SE mini Card
by Realtek Semiconductor Corp.
Grantee Code: TX2 Product Code: RTL8187SE
Latest application date: 2009-04-24
FCC ID Device Details
| FCC ID | TX2-RTL8187SE |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | TX2 |
| Product Code | RTL8187SE |
| Applicant Business | Realtek Semiconductor Corp. 🇹🇼 |
| Related Domains |  realtek.com |
| Equipment Class | 802.11b/g RTL8187SE mini Card |
| Test Firm | Sporton International Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2009-04-24 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2009-01-22 |
| 2412-2462 MHz | Original Equipment | 2008-02-18 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2009-04-24 | PDF 285.6 KB |
| User Manual for the host | Users Manual | 2009-01-22 | PDF 4 MB |
| User Manual | Users Manual | 2008-02-18 | PDF 1.8 MB |
| Internal Photos | Internal Photos | 2009-04-24 | PDF 3.6 MB |
| Internal Photos | Internal Photos | 2008-02-18 | PDF 272.8 KB |
| External Photos | External Photos | 2009-04-24 | PDF 484.8 KB |
| External Photos Antenna Location | External Photos | 2009-04-24 | PDF 146.6 KB |
| External Photos | External Photos | 2008-02-18 | PDF 346.9 KB |
| ID Label Location Info | ID Label/Location Info | 2009-04-24 | PDF 1 MB |
| FCC ID label location and label format for the host | ID Label/Location Info | 2009-01-22 | PDF 99.4 KB |
| Label Info | ID Label/Location Info | 2008-02-18 | PDF 87.7 KB |
| SAR Test Setup Photos | Test Setup Photos | 2009-01-22 | PDF 33.6 KB |
| Test Setup Photos | Test Setup Photos | 2008-02-18 | PDF 428 KB |
| Test Report | Test Report | 2009-04-24 | PDF 3.2 MB |
| SAR Test Report | RF Exposure Info | 2009-01-22 | PDF 1.9 MB |
| WLAN Test Report | Test Report | 2009-01-22 | PDF 456.8 KB |
| Test Report | Test Report | 2008-02-18 | PDF 2.2 MB |
| Class II Letter | Cover Letter(s) | 2009-04-24 | PDF 17.3 KB |
| DOC Letter | Cover Letter(s) | 2009-04-24 | PDF 17.4 KB |
| Power of Attorney | Cover Letter(s) | 2009-04-24 | PDF 18 KB |
| Authroization letter | Cover Letter(s) | 2009-01-22 | PDF 18.6 KB |
| Class II permissive change request letter | Cover Letter(s) | 2009-01-22 | PDF 43.8 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2008-02-18 | PDF 43 KB |
| LMA Letter | Cover Letter(s) | 2008-02-18 | PDF 29.3 KB |
| POA | Cover Letter(s) | 2008-02-18 | PDF 26.5 KB |
| SAR Report | RF Exposure Info | 2009-04-24 | PDF 3.7 MB |
| MPE | RF Exposure Info | 2008-02-18 | PDF 60.3 KB |
Application Information
| Application ID | DEzKogWLWaQwOwSJLIEU7Q== |
|---|---|
| Final Action Date | 2009-04-24 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0020109807 |
| Model | -RTL8187SE |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11b/g RTL8187SE mini Card |
| Responsible Party | Dana Liaw, Project Manager, danaliaw@realtek.com , 886-3-5780211 |
| Agent | Wayne Wayne Wayne, Sporton International Inc., wayne@sporton.com.tw  , 886-3-3273456 |
| Test Firm | Alex Chen, Sporton International Inc., alex@sporton.com.tw , 886-3-327-3456 |
| TCB Email | Brandhorst.dirk@phoenix-testlab.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output is conducted. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. The device which integrates this module needs to provide stable 3.3 VDC power to this module. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This grant is only valid when the device is sold to OEM integrators and they are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. Class II Permissive Change to allow portable configurations in specific host as described in this filling. This approval is for operation of the device only with the antenna described in this filing installed as an integral part of the host product. Operation with other antennas or configurations may require separate evaluation. The antenna(s) used for mobile exposure conditions of this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is approved for use in configurations specified in the application filing. Operating and installation requirements must be provided. Additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest measured body SAR value as documented in this filing is 0.012 W/kg. Class II Permissive Change to allow additional portable configuration in specific host with highest measured (lap-held) SAR of 0.013 W/kg as documented in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| DEzKogWLWaQwOwSJLIEU7Q== | 2009-04-24 | Class II permissive change or modification of presently authorized equipment |
| gM5tV6E8fdq9j/ZUBXejzw== | 2009-01-22 | Class II permissive change or modification of presently authorized equipment |
| 1821Me8tqS8K6mn0mb/s2g== | 2008-02-18 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.1860000 | 15C |
Grants
TCB Grant - Application gM5tV6E8fdq9j/ZUBXejzw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 01/22/2009 Application Dated: 01/22/2009 |
| Realtek Semiconductor Corp. |
| No. 2 |
| Innovation Road II, Hsinchu Science Park |
| Hsinchu, 300 Taiwan |
| Attention: Dana Liaw , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TX2-RTL8187SE |
| Name of Grantee: | Realtek Semiconductor Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g RTL8187SE miniCard |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.186 |
| Class II Permissive Change to allow portable configurations in specific host as described in this filling. Power output listed is conducted. This approval is for operation of the device only with the antenna described in this filing installed as an integral part of the host product. Operation with other antennas or configurations may require separate evaluation. The antenna(s) used for mobile exposure conditions of this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures.. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is approved for use in configurations specified in the application filing. Operating and installation requirements must be provided. Additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest measured body SAR value as documented in this filing is 0.012 W/kg. |
EAS Grant - Application gM5tV6E8fdq9j/ZUBXejzw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Realtek Semiconductor Corp. No. 2 Innovation Road II, Hsinchu Science Park Hsinchu, 300 Taiwan |
Date of Grant: 01/22/2009 Application Dated: 01/22/2009 |
| Attention: Dana Liaw , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TX2-RTL8187SE |
| Name of Grantee: | Realtek Semiconductor Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g RTL8187SE miniCard |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.186 |
| Class II Permissive Change to allow portable configurations in specific host as described in this filling. Power output listed is conducted. This approval is for operation of the device only with the antenna described in this filing installed as an integral part of the host product. Operation with other antennas or configurations may require separate evaluation. The antenna(s) used for mobile exposure conditions of this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures.. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is approved for use in configurations specified in the application filing. Operating and installation requirements must be provided. Additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest measured body SAR value as documented in this filing is 0.012 W/kg. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 04/24/2009 Application Dated: 04/24/2009 |
| Realtek Semiconductor Corp. |
| No. 2 |
| Innovation Road II, Hsinchu Science Park |
| Hsinchu, 300 Taiwan |
| Attention: Dana Liaw , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TX2-RTL8187SE |
| Name of Grantee: | Realtek Semiconductor Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g RTL8187SE mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.186 |
| Power Output is conducted. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. The device which integrates this module needs to provide stable 3.3 VDC power to this module. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This grant is only valid when the device is sold to OEM integrators and they are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. Class II Permissive Change to allow portable configurations in specific host as described in this filling. This approval is for operation of the device only with the antenna described in this filing installed as an integral part of the host product. Operation with other antennas or configurations may require separate evaluation. The antenna(s) used for mobile exposure conditions of this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is approved for use in configurations specified in the application filing. Operating and installation requirements must be provided. Additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest measured body SAR value as documented in this filing is 0.012 W/kg. Class II Permissive Change to allow additional portable configuration in specific host with highest measured (lap-held) SAR of 0.013 W/kg as documented in this filing. |
EAS Grant - Application DEzKogWLWaQwOwSJLIEU7Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Realtek Semiconductor Corp. No. 2 Innovation Road II, Hsinchu Science Park Hsinchu, 300 Taiwan |
Date of Grant: 04/24/2009 Application Dated: 04/24/2009 |
| Attention: Dana Liaw , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TX2-RTL8187SE |
| Name of Grantee: | Realtek Semiconductor Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g RTL8187SE mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.186 |
| Power Output is conducted. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. The device which integrates this module needs to provide stable 3.3 VDC power to this module. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This grant is only valid when the device is sold to OEM integrators and they are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. Class II Permissive Change to allow portable configurations in specific host as described in this filling. This approval is for operation of the device only with the antenna described in this filing installed as an integral part of the host product. Operation with other antennas or configurations may require separate evaluation. The antenna(s) used for mobile exposure conditions of this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is approved for use in configurations specified in the application filing. Operating and installation requirements must be provided. Additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest measured body SAR value as documented in this filing is 0.012 W/kg. Class II Permissive Change to allow additional portable configuration in specific host with highest measured (lap-held) SAR of 0.013 W/kg as documented in this filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 02/18/2008 Application Dated: 02/18/2008 |
| Realtek Semiconductor Corp. |
| No. 2 |
| Innovation Road II, Hsinchu Science Park |
| Hsinchu, 300 Taiwan |
| Attention: Dana Liaw , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TX2-RTL8187SE |
| Name of Grantee: | Realtek Semiconductor Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g RTL8187SE miniCard |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.186 |
| Power Output is Conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. The device which integrates this module need to provide stable 3.3VDC power to this module. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. |
EAS Grant - Application 1821Me8tqS8K6mn0mb/s2g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Realtek Semiconductor Corp. No. 2 Innovation Road II, Hsinchu Science Park Hsinchu, 300 Taiwan |
Date of Grant: 02/18/2008 Application Dated: 02/18/2008 |
| Attention: Dana Liaw , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TX2-RTL8187SE |
| Name of Grantee: | Realtek Semiconductor Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g RTL8187SE miniCard |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.186 |
| Power Output is Conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. The device which integrates this module need to provide stable 3.3VDC power to this module. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. |
| Mail To: |