FCC ID TX2RTL8192EEBT

FCC ID	TX2RTL8192EEBT
Mirrors	fcc.id \| gov \| fccid.ai
Grantee Code	TX2
Product Code	RTL8192EEBT
Applicant Business	Realtek Semiconductor Corp. 🇹🇼
Related Domains	realtek.com
Equipment Class	802.11b/g/n RTL8192EE Combo module
Test Firm	QuieTek Corporation LinKou Laboratory

Frequency Range	Application Purpose	Final Action Date
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2016-11-01
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2016-01-27
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2016-01-04
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2015-05-19
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2015-05-19
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2014-12-04
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2014-12-04
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2014-05-16
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2014-05-16
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2013-07-24
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2013-07-24
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2013-06-28
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2013-06-28
2402-2480 MHz	Original Equipment	2013-05-14
2402-2480 MHz	Original Equipment	2013-05-14

Document	Type	Available	File
Users Manual	Users Manual	2016-11-01	PDF 525.9 KB
(RTL8192EEBT) UserMan-part1	Users Manual	2016-01-27	PDF 2.8 MB
(RTL8192EEBT) UserMan-part2	Users Manual	2016-01-27	PDF 4.3 MB
(RTL8192EEBT) UserMan_20151231	Users Manual	2016-01-04	PDF 5 MB
User Manual	Users Manual	2015-05-19	PDF 817.6 KB
Users Manual	Users Manual	2015-02-12	PDF 2.8 MB
User Manual	Users Manual	2014-11-13	PDF 2.4 MB
user manual	Users Manual	2014-01-20	PDF 1.6 MB
user manual	Users Manual	2014-01-20	PDF 1.7 MB
User manual	Users Manual	2013-11-10	PDF 818.1 KB
User manual Installation	Users Manual	2013-11-10	PDF 618.5 KB
Regular notice	Users Manual	2013-08-24	PDF 200.9 KB
Regulatory Notice	Users Manual	2013-08-24	PDF 200.9 KB
User manual	Users Manual	2013-08-24	PDF 2 MB
Internal photos	Internal Photos	2016-11-01	PDF 2.3 MB
(RTL8192EEBT) Inpho_SAR	Internal Photos	2016-01-27	PDF 4.9 MB
(RTL8192EEBT) Inpho_SAR	Internal Photos	2016-01-04	PDF 3.9 MB
(RTL8192EEBT) Inpho_SAR_20160130	Internal Photos	2016-01-04	PDF 3.8 MB
Internal Photos	Internal Photos	2015-02-12	PDF 1.8 MB
Internal Photos	Internal Photos	2014-11-13	PDF 806.1 KB
internal photos	Internal Photos	2014-01-20	PDF 463.3 KB
Int Photos	Internal Photos	2013-11-10	PDF 463.3 KB
Int photos	Internal Photos	2013-11-10	PDF 463.3 KB
HOST Platform	Internal Photos	2013-08-24	PDF 726.6 KB
External photos	External Photos	2016-11-01	PDF 227.1 KB
(RTL8192EEBT) Expho_SAR	External Photos	2016-01-27	PDF 583.7 KB
(RTL8192EEBT) Expho_SAR	External Photos	2016-01-04	PDF 628 KB
External Photos	External Photos	2015-02-12	PDF 691.3 KB
External Photos	External Photos	2014-11-13	PDF 2 MB
external photos	External Photos	2014-01-20	PDF 419.7 KB
Ext photos	External Photos	2013-11-10	PDF 419.7 KB
Host Platform Information	External Photos	2013-08-24	PDF 726.6 KB
Label	ID Label/Location Info	2016-11-01	PDF 316.2 KB
Label location	ID Label/Location Info	2016-11-01	PDF 47.8 KB
(RTL8192EEBT) LabelLoc	ID Label/Location Info	2016-01-27	PDF 44.3 KB
(RTL8192EEBT) Labelsmpl	ID Label/Location Info	2016-01-27	PDF 221.6 KB
(RTL8192EEBT) LabelLoc	ID Label/Location Info	2016-01-04	PDF 61.4 KB
(RTL8192EEBT) Labelsmpl_20151231	ID Label/Location Info	2016-01-04	PDF 123.5 KB
Label and Location	ID Label/Location Info	2014-12-04	PDF 58 KB
FCC ID Label and Location	ID Label/Location Info	2014-05-16	PDF 113.3 KB
FCC ID Label and location	ID Label/Location Info	2014-05-16	PDF 113.3 KB
Label Location	ID Label/Location Info	2013-05-14	PDF 53.1 KB
Label location	ID Label/Location Info	2013-05-14	PDF 53.1 KB
Test setup photos	Test Setup Photos	2016-11-01	PDF 134.6 KB
(RTL8192EEBT) Tsup	Test Setup Photos	2016-01-27	PDF 304.4 KB
(RTL8192EEBT) Tsup_SAR	Test Setup Photos	2016-01-27	PDF 180.6 KB
(RTL8192EEBT) Tsup	Test Setup Photos	2016-01-04	PDF 571.9 KB
(RTL8192EEBT) Tsup_SAR	Test Setup Photos	2016-01-04	PDF 154.5 KB
Test Setup Photo	Test Setup Photos	2015-05-19	PDF 458.5 KB
SAR Test Setup Photos	Test Setup Photos	2015-02-12	PDF 330 KB
Test Setup Photos	Test Setup Photos	2015-02-12	PDF 453.7 KB
Test Setup Photos	Test Setup Photos	2015-02-12	PDF 340.1 KB
Test Setup Photos for BT4.0	Test Setup Photos	2014-11-13	PDF 167.9 KB
Test Setup Photos for DSS	Test Setup Photos	2014-11-13	PDF 168.6 KB
Test Setup Photos for SAR	Test Setup Photos	2014-11-13	PDF 222.6 KB
Test Setup Photos for WLAN	Test Setup Photos	2014-11-13	PDF 165.4 KB
test setup photos	Test Setup Photos	2014-01-20	PDF 459.6 KB
Test Setup phoots	Test Setup Photos	2013-11-10	PDF 428.8 KB
Test setup photos	Test Setup Photos	2013-11-10	PDF 428.8 KB
SAR test report	RF Exposure Info	2016-11-01	PDF 1.9 MB
(RTL8192EEBT) TestRpt_15.247	Test Report	2016-01-27	PDF 436.3 KB
(RTL8192EEBT) TestRpt_15.247_20151231	Test Report	2016-01-04	PDF 451.6 KB
Test Report	Test Report	2015-05-19	PDF 857.5 KB
SAR Test Report	RF Exposure Info	2014-12-04	PDF 1.1 MB
Test Report	Test Report	2014-12-04	PDF 970 KB
Test Report	Test Report	2014-12-04	PDF 1.3 MB
Test Report for BT4.0	Test Report	2014-05-16	PDF 529.1 KB
Test Report for DSS	Test Report	2014-05-16	PDF 589.4 KB
Test Report for WLAN	Test Report	2014-05-16	PDF 1 MB
Colocation Report	Test Report	2013-05-14	PDF 171.5 KB
Test Report	Test Report	2013-05-14	PDF 1.4 MB
Test Report BT	Test Report	2013-05-14	PDF 697 KB
Test Report Wlan	Test Report	2013-05-14	PDF 2.9 MB
(RTL8192EEBT) ATTESTATION	Cover Letter(s)	2016-01-27	PDF 27.9 KB
(RTL8192EEBT) ATTESTATION	Cover Letter(s)	2016-01-04	PDF 15.6 KB
Confidentiality request	Cover Letter(s)	2016-11-01	PDF 33.7 KB
Cover Letter	Cover Letter(s)	2016-11-01	PDF 38.5 KB
(RTL8192EEBT) About WiFi Channels 12 & 13 Declaration letter	Cover Letter(s)	2016-01-27	PDF 30 KB
(RTL8192EEBT) Class II Change	Cover Letter(s)	2016-01-27	PDF 33 KB
(RTL8192EEBT) Confidentiality Request	Cover Letter(s)	2016-01-27	PDF 29.2 KB
(RTL8192EEBT) Declaration of authorization	Cover Letter(s)	2016-01-27	PDF 30.8 KB
(RTL8192EEBT) Doc Letter	Cover Letter(s)	2016-01-27	PDF 24 KB
(RTL8192EEBT) About WiFi Channels 12 & 13 Declaration letter	Cover Letter(s)	2016-01-04	PDF 50.8 KB
(RTL8192EEBT) Class II Change_20151231	Cover Letter(s)	2016-01-04	PDF 36 KB
(RTL8192EEBT) Confidentiality Request	Cover Letter(s)	2016-01-04	PDF 16 KB
(RTL8192EEBT) DTS-UNII Declaration letter_20151231	Cover Letter(s)	2016-01-04	PDF 57.9 KB
(RTL8192EEBT) RF_160_02 Declaration of authorization	Cover Letter(s)	2016-01-04	PDF 20.6 KB
Class II Permissive Change Letter	Cover Letter(s)	2015-05-19	PDF 199.6 KB
Confidential Request Letter	Cover Letter(s)	2015-05-19	PDF 218.4 KB
Confidentiality Request Letter	Cover Letter(s)	2015-05-19	PDF 218.4 KB
POA	Cover Letter(s)	2015-05-19	PDF 207.4 KB
Agent Authorization Letter	Cover Letter(s)	2014-12-04	PDF 122.7 KB
Class II Permissive Change Letter	Cover Letter(s)	2014-12-04	PDF 33 KB
Request for Confidentiality Letter	Cover Letter(s)	2014-12-04	PDF 71.7 KB
Class II Permissive Change Request Letter	Cover Letter(s)	2014-05-16	PDF 182.5 KB
LTC Request Letter	Cover Letter(s)	2014-05-16	PDF 97.9 KB
POA	Cover Letter(s)	2014-05-16	PDF 17 KB
STC Request Letter	Cover Letter(s)	2014-05-16	PDF 26.4 KB
PoA	Cover Letter(s)	2013-07-24	PDF 59.6 KB
Request for Confidentiality	Cover Letter(s)	2013-07-24	PDF 75.4 KB
calibaration certificate	Cover Letter(s)	2013-07-24	PDF 1.6 MB
class II change letter	Cover Letter(s)	2013-07-24	PDF 59.6 KB
modular approval letter	Cover Letter(s)	2013-07-24	PDF 28.7 KB
requst for confidentiality	Cover Letter(s)	2013-07-24	PDF 75.4 KB
Class II Letter	Cover Letter(s)	2013-06-28	PDF 59.5 KB
Class II letter	Cover Letter(s)	2013-06-28	PDF 59.4 KB
LTC request	Cover Letter(s)	2013-06-28	PDF 75.9 KB
PoA	Cover Letter(s)	2013-06-28	PDF 59.7 KB
Ad hoc mode letter	Cover Letter(s)	2013-05-14	PDF 48 KB
Antenna List	Cover Letter(s)	2013-05-14	PDF 106.2 KB
LTC request	Cover Letter(s)	2013-05-14	PDF 53.1 KB
MA letter	Cover Letter(s)	2013-05-14	PDF 15.2 KB
PoA	Cover Letter(s)	2013-05-14	PDF 22.8 KB
(RTL8192EEBT) TestRpt_SAR	RF Exposure Info	2016-01-27	PDF 5 MB
(RTL8192EEBT) TestRpt_SAR_20151231	RF Exposure Info	2016-01-04	PDF 5.3 MB
RF Exposure Appendix A	RF Exposure Info	2015-05-19	PDF 120.8 KB
RF Exposure Appendix B	RF Exposure Info	2015-05-19	PDF 181.8 KB
RF Exposure Appendix C	RF Exposure Info	2015-05-19	PDF 699.7 KB
SAR Appendixes	RF Exposure Info	2014-12-04	PDF 3.1 MB
SAR Report-1	RF Exposure Info	2014-05-16	PDF 869 KB
SAR Report-2	RF Exposure Info	2014-05-16	PDF 51.3 KB
SAR Report-3	RF Exposure Info	2014-05-16	PDF 93.3 KB
SAR Report-4	RF Exposure Info	2014-05-16	PDF 734.5 KB
sar plots	RF Exposure Info	2013-07-24	PDF 587.2 KB
sar report	RF Exposure Info	2013-07-24	PDF 1.3 MB
tune up procedure	Parts List/Tune Up Info	2013-07-24	PDF 232.4 KB
MPE	RF Exposure Info	2013-05-14	PDF 102.3 KB
MPE Report	RF Exposure Info	2013-05-14	PDF 102.3 KB
(RTL8192EEBT) BlkDia Metadata only	Block Diagram		PDF 493.5 KB
(RTL8192EEBT) BlkDia Metadata only	Block Diagram		PDF 716.8 KB
(RTL8192EEBT) Schem Metadata only	Schematics		PDF 2.3 MB
Confidential_(RTL8192EEBT) Schem Metadata only	Schematics		PDF 2.3 MB
(RTL8192EEBT) OPDes_20151231 Metadata only	Operational Description		PDF 85.7 KB
Antenna Spec Metadata only	Operational Description		PDF 2.8 MB
Confidential_(RTL8192EEBT) OPDes Metadata only	Operational Description		PDF 133.2 KB
OpDes_2-Way Authentication Attestation Metadata only	Operational Description		PDF 211.9 KB
OpDes_Antenna Spec_Tongda Metadata only	Operational Description		PDF 2.4 MB
OpDes_Antenna Spec_WNC Metadata only	Operational Description		PDF 1.4 MB
Operational Description Antenna Report Metadata only	Operational Description		PDF 370.4 KB
Tune Up Information Metadata only	Parts List/Tune Up Info		PDF 188.3 KB
Tune Up Procedure Metadata only	Parts List/Tune Up Info		PDF 78.3 KB
Tune Up Procedures Metadata only	Parts List/Tune Up Info		PDF 107.4 KB

Application ID	ac/3W7JcUyzC2doXLsQ0fw==
Final Action Date	2016-11-01
Application Purpose	Class II permissive change or modification of presently authorized equipment
Applicant FRN	0020109807
Model	RTL8192EEBT
Frequency Range	2402-2480 MHz
Equipment Class	DTS - Digital Transmission System
Device Description	802.11b/g/n RTL8192EE Combo module
Responsible Party	Dana Liaw, Project Manager, danaliaw@realtek.com , 886-3-5780211
Agent	Henk Henk Henk, QuieTek Corporation, Henkhuang@quietek.com , 886226027968
Technical Contact	Valentina Wu, QuieTek Corporation, valentina.wu@quietek.com , 886226027968
Test Firm	Sky Hsu, QuieTek Corporation LinKou Laboratory, skyhsu@quietek.com , 886-2-86013788
TCB Email	hotline@acbcert.com
TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term Confidentiality	No
Long-Term Confidentiality	Yes
Grant Deferral	No
Modular Equipment	Single Modular Approval
Composite Device	Yes
Composite Part	No
Cognitive Radio	No
Authorization Waiver	No
Authorization Waiver Approved	No
Section 5301 Certification	Yes
Related OET Knowledge DataBase Inquiry	No
Grant Comments	Single Modular Approval. Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-colocated with the composite DSS portion. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/14/2013) Class II Permissive Change: this Class II Permissive Change is to extend the grant condition to portable condition under 5 mm test separation distance. This equipment should be installed and operated with a minimum distance of 0.5cm between the radiator and the users body. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.18 W/kg and 1.96 W/kg, respectively. C2PC to install this module to ASUS host with models - E403N, L403N, R416N and X400N as documented in this filing.

Application ID	Date	Purpose
ac/3W7JcUyzC2doXLsQ0fw==	2016-11-01	Class II permissive change or modification of presently authorized equipment
mZ8ooCP1ek3x6bobzeMpgQ==	2016-01-27	Class II permissive change or modification of presently authorized equipment
pD3MVstGTKOU9z+rNO2gjg==	2016-01-04	Class II permissive change or modification of presently authorized equipment
dzEs5dNNoZ4gyYh+2tD7YQ==	2015-05-19	Class II permissive change or modification of presently authorized equipment
MHKeJ0urkIXqwXmIfseF7w==	2015-05-19	Class II permissive change or modification of presently authorized equipment
il35ztdeVSkHd0NyynpgCw==	2014-12-04	Class II permissive change or modification of presently authorized equipment
TtvmxlPQP6lfqO4yY9wboQ==	2014-12-04	Class II permissive change or modification of presently authorized equipment
9017bsCwkRPAP74istLxKg==	2014-05-16	Class II permissive change or modification of presently authorized equipment
5p3RYi+R2EcdVu9SJS1XYg==	2014-05-16	Class II permissive change or modification of presently authorized equipment
m2Y5Wpj26s4fNxRbqIbxaA==	2013-07-24	Class II permissive change or modification of presently authorized equipment
3iCSyVaKVHyODOMLkiLTmw==	2013-07-24	Class II permissive change or modification of presently authorized equipment
dX1DxHeM4n2l2HP8u01b+g==	2013-06-28	Class II permissive change or modification of presently authorized equipment
bxtK/2gbvfSrlBwyCNkBIA==	2013-06-28	Class II permissive change or modification of presently authorized equipment
wtWSOymrQNglcMwxUU8Vzg==	2013-05-14	Original Equipment
qJvvuzDrPxqR/MGIC0yX/g==	2013-05-14	Original Equipment

Frequency	Output	Rules	Grant Notes
2402-2480 MHz	0.0047000	15C	CC
2402-2480 MHz	0.0035	15C	CC
2402-2480 MHz	0.0035	15C	CC, MO
2412-2462 MHz	0.1493	15C	CC, MO
2422-2452 MHz	0.0865	15C	CC, MO

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany

Date of Grant: 05/14/2013

Application Dated: 05/14/2013

Realtek Semiconductor Corp.

No. 2

Innovation Road II, Hsinchu Science Park

Hsinchu, 300
Taiwan

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11bgn RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0047

Output Power listed is the maximum conducted output power as indicated in the filing. The device can be self-colocated with the composite DTS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan

Date of Grant: 05/14/2013

Application Dated: 05/14/2013

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11bgn RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0047

Output Power listed is the maximum conducted output power as indicated in the filing. The device can be self-colocated with the composite DTS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application TtvmxlPQP6lfqO4yY9wboQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 12/04/2014

Application Dated: 12/04/2014

Realtek Semiconductor Corp.

No. 2

Innovation Road II, Hsinchu Science Park

Hsinchu, 300
Taiwan

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11b/g/n RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0047

Output Power listed is the maximum conducted output power as indicated in the filing. The device can be self-collocated with the composite DTS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Permissive Change to add portable RF exposure configuration model TP00062B and add new antennas. For Modular SAR, the highest SAR value for body-worn configuration with highest gain PIFA antenna and 0.8 cm separation distance: 0.77 W/kg. SAR measurements are excluded for this DSS transmission in this C2PC.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan

Date of Grant: 12/04/2014

Application Dated: 12/04/2014

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11b/g/n RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0047

Output Power listed is the maximum conducted output power as indicated in the filing. The device can be self-collocated with the composite DTS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Permissive Change to add portable RF exposure configuration model TP00062B and add new antennas. For Modular SAR, the highest SAR value for body-worn configuration with highest gain PIFA antenna and 0.8 cm separation distance: 0.77 W/kg. SAR measurements are excluded for this DSS transmission in this C2PC.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application qJvvuzDrPxqR/MGIC0yX/g==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany

Date of Grant: 05/14/2013

Application Dated: 05/14/2013

Realtek Semiconductor Corp.

No. 2

Innovation Road II, Hsinchu Science Park

Hsinchu, 300
Taiwan

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Digital Transmission System
Notes:	802.11bgn RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0035
CC MO	15C	2412.0 - 2462.0	0.1493
CC MO	15C	2422.0 - 2452.0	0.0865

Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-colocated with the composite DSS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan

Date of Grant: 05/14/2013

Application Dated: 05/14/2013

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Digital Transmission System
Notes:	802.11bgn RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0035
CC MO	15C	2412.0 - 2462.0	0.1493
CC MO	15C	2422.0 - 2452.0	0.0865

Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-colocated with the composite DSS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application pD3MVstGTKOU9z+rNO2gjg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 01/04/2016

Application Dated: 01/04/2016

Realtek Semiconductor Corp.

No. 2

Innovation Road II, Hsinchu Science Park

Hsinchu, 300
Taiwan

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Digital Transmission System
Notes:	802.11b/g/n RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0035
CC MO	15C	2412.0 - 2462.0	0.1493
CC MO	15C	2422.0 - 2452.0	0.0865

Single Modular Approval. Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-colocated with the composite DSS portion. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/14/2013)

Class II Permissive Change: this Class II Permissive Change is to extend the grant condition to portable condition under 5 mm test separation distance. This equipment should be installed and operated with a minimum distance of 0.5cm between the radiator and the users body. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.75 W/kg and 0.95 W/kg, respectively.

C2PC to install this module to ASUS notebook/tablet with models TP301U and Q303U; and address SAR evaluation, as documented in this filing.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan

Date of Grant: 01/04/2016

Application Dated: 01/04/2016

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Digital Transmission System
Notes:	802.11b/g/n RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0035
CC MO	15C	2412.0 - 2462.0	0.1493
CC MO	15C	2422.0 - 2452.0	0.0865

Single Modular Approval. Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-colocated with the composite DSS portion. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/14/2013)

Class II Permissive Change: this Class II Permissive Change is to extend the grant condition to portable condition under 5 mm test separation distance. This equipment should be installed and operated with a minimum distance of 0.5cm between the radiator and the users body. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.75 W/kg and 0.95 W/kg, respectively.

C2PC to install this module to ASUS notebook/tablet with models TP301U and Q303U; and address SAR evaluation, as documented in this filing.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application mZ8ooCP1ek3x6bobzeMpgQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 01/27/2016

Application Dated: 01/27/2016

Realtek Semiconductor Corp.

No. 2

Innovation Road II, Hsinchu Science Park

Hsinchu, 300
Taiwan

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Digital Transmission System
Notes:	802.11b/g/n RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0035
CC MO	15C	2412.0 - 2462.0	0.1493
CC MO	15C	2422.0 - 2452.0	0.0865

Single Modular Approval. Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-colocated with the composite DSS portion. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/14/2013)

Class II Permissive Change: this Class II Permissive Change is to extend the grant condition to portable condition under 5 mm test separation distance. This equipment should be installed and operated with a minimum distance of 0.5cm between the radiator and the users body. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.75 W/kg and 0.95 W/kg, respectively.

C2PC to install this module to ASUS host with models - TP501U, J501U and R518U, as documented in this filing. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.2 W/kg and 1.37 W/kg, respectively.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan

Date of Grant: 01/27/2016

Application Dated: 01/27/2016

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Digital Transmission System
Notes:	802.11b/g/n RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0035
CC MO	15C	2412.0 - 2462.0	0.1493
CC MO	15C	2422.0 - 2452.0	0.0865

Single Modular Approval. Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-colocated with the composite DSS portion. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/14/2013)

Class II Permissive Change: this Class II Permissive Change is to extend the grant condition to portable condition under 5 mm test separation distance. This equipment should be installed and operated with a minimum distance of 0.5cm between the radiator and the users body. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.75 W/kg and 0.95 W/kg, respectively.

C2PC to install this module to ASUS host with models - TP501U, J501U and R518U, as documented in this filing. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.2 W/kg and 1.37 W/kg, respectively.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application MHKeJ0urkIXqwXmIfseF7w==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 05/19/2015

Application Dated: 05/18/2015

Realtek Semiconductor Corp.

No. 2

Innovation Road II, Hsinchu Science Park

Hsinchu, 300
Taiwan

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11b/g/n RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0047

Output Power listed is the maximum conducted output power as indicated in the filing. The device can be self-colocated with the composite DTS portion. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/14/2013)

Class II Permissive Change: This Class II Permissive Change is to extend the grant condition to portable condition under 5 mm test separation distance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan

Date of Grant: 05/19/2015

Application Dated: 05/18/2015

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11b/g/n RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0047

Output Power listed is the maximum conducted output power as indicated in the filing. The device can be self-colocated with the composite DTS portion. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/14/2013)

Class II Permissive Change: This Class II Permissive Change is to extend the grant condition to portable condition under 5 mm test separation distance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application m2Y5Wpj26s4fNxRbqIbxaA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany

Date of Grant: 07/24/2013

Application Dated: 07/24/2013

Realtek Semiconductor Corp.

No. 2

Innovation Road II, Hsinchu Science Park

Hsinchu, 300
Taiwan

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11bgn RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0047

Output Power listed is the maximum conducted output power as indicated in the filing. The device can be self-colocated with the composite DTS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Class II Permissive Change upgrades mobile to portable RF exposure configuration. Highest SAR value for body-worn configuration with highest gain PIFA antenna and 0.8 cm separation distance: 0.77 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan

Date of Grant: 07/24/2013

Application Dated: 07/24/2013

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11bgn RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0047

Output Power listed is the maximum conducted output power as indicated in the filing. The device can be self-colocated with the composite DTS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Class II Permissive Change upgrades mobile to portable RF exposure configuration. Highest SAR value for body-worn configuration with highest gain PIFA antenna and 0.8 cm separation distance: 0.77 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application il35ztdeVSkHd0NyynpgCw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 12/04/2014

Application Dated: 12/04/2014

Realtek Semiconductor Corp.

No. 2

Innovation Road II, Hsinchu Science Park

Hsinchu, 300
Taiwan

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Digital Transmission System
Notes:	802.11b/g/n RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0035
CC MO	15C	2412.0 - 2462.0	0.1493
CC MO	15C	2422.0 - 2452.0	0.0865

Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-collocated with the composite DSS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Permissive Change to add portable RF exposure configuration model TP00062B and add new antennas. For Modular SAR, the highest SAR value for body-worn configuration with highest gain PIFA antenna and 0.8 cm separation distance: 0.77 W/kg. The highest reported SAR value in this C2PC is 1.15 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan

Date of Grant: 12/04/2014

Application Dated: 12/04/2014

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Digital Transmission System
Notes:	802.11b/g/n RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0035
CC MO	15C	2412.0 - 2462.0	0.1493
CC MO	15C	2422.0 - 2452.0	0.0865

Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-collocated with the composite DSS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Permissive Change to add portable RF exposure configuration model TP00062B and add new antennas. For Modular SAR, the highest SAR value for body-worn configuration with highest gain PIFA antenna and 0.8 cm separation distance: 0.77 W/kg. The highest reported SAR value in this C2PC is 1.15 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application dzEs5dNNoZ4gyYh+2tD7YQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 05/19/2015

Application Dated: 05/18/2015

Realtek Semiconductor Corp.

No. 2

Innovation Road II, Hsinchu Science Park

Hsinchu, 300
Taiwan

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Digital Transmission System
Notes:	802.11b/g/n RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0035
CC MO	15C	2412.0 - 2462.0	0.1493
CC MO	15C	2422.0 - 2452.0	0.0865

Single Modular Approval. Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-colocated with the composite DSS portion. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/14/2013)

Class II Permissive Change: this Class II Permissive Change is to extend the grant condition to portable condition under 5 mm test separation distance. This equipment should be installed and operated with a minimum distance of 0.5cm between the radiator and the users body. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.75 W/kg and 0.95 W/kg, respectively.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan

Date of Grant: 05/19/2015

Application Dated: 05/18/2015

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Digital Transmission System
Notes:	802.11b/g/n RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0035
CC MO	15C	2412.0 - 2462.0	0.1493
CC MO	15C	2422.0 - 2452.0	0.0865

Single Modular Approval. Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-colocated with the composite DSS portion. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/14/2013)

Class II Permissive Change: this Class II Permissive Change is to extend the grant condition to portable condition under 5 mm test separation distance. This equipment should be installed and operated with a minimum distance of 0.5cm between the radiator and the users body. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.75 W/kg and 0.95 W/kg, respectively.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application dX1DxHeM4n2l2HP8u01b+g==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany

Date of Grant: 06/28/2013

Application Dated: 06/28/2013

Realtek Semiconductor Corp.

No. 2

Innovation Road II, Hsinchu Science Park

Hsinchu, 300
Taiwan

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11bgn RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0047

Output Power listed is the maximum conducted output power as indicated in the filing. The device can be self-colocated with the composite DTS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

This Class II Permissive Change adds the installation of this RF Module by end-users into the lenovo laptop (ThinkPad X240 / X240s / T440s) via 2-way BIOS lock function. This device must use a BIOS lock mechanism which ensures that it only operates with the hosts as specified in the Certification filing.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan

Date of Grant: 06/28/2013

Application Dated: 06/28/2013

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11bgn RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0047

Output Power listed is the maximum conducted output power as indicated in the filing. The device can be self-colocated with the composite DTS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

This Class II Permissive Change adds the installation of this RF Module by end-users into the lenovo laptop (ThinkPad X240 / X240s / T440s) via 2-way BIOS lock function. This device must use a BIOS lock mechanism which ensures that it only operates with the hosts as specified in the Certification filing.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application bxtK/2gbvfSrlBwyCNkBIA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany

Date of Grant: 06/28/2013

Application Dated: 06/28/2013

Realtek Semiconductor Corp.

No. 2

Innovation Road II, Hsinchu Science Park

Hsinchu, 300
Taiwan

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Digital Transmission System
Notes:	802.11bgn RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0035
CC MO	15C	2412.0 - 2462.0	0.1493
CC MO	15C	2422.0 - 2452.0	0.0865

Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-colocated with the composite DSS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

This Class II Permissive Change adds the installation of this RF Module by end-users into the lenovo laptop (ThinkPad X240 / X240s / T440s) via 2-way BIOS lock function. This device must use a BIOS lock mechanism which ensures that it only operates with the hosts as specified in the Certification filing.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan

Date of Grant: 06/28/2013

Application Dated: 06/28/2013

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Digital Transmission System
Notes:	802.11bgn RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0035
CC MO	15C	2412.0 - 2462.0	0.1493
CC MO	15C	2422.0 - 2452.0	0.0865

Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-colocated with the composite DSS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

This Class II Permissive Change adds the installation of this RF Module by end-users into the lenovo laptop (ThinkPad X240 / X240s / T440s) via 2-way BIOS lock function. This device must use a BIOS lock mechanism which ensures that it only operates with the hosts as specified in the Certification filing.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application ac/3W7JcUyzC2doXLsQ0fw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 11/01/2016

Application Dated: 10/28/2016

Realtek Semiconductor Corp.

No. 2

Innovation Road II, Hsinchu Science Park

Hsinchu, 300
Taiwan

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Digital Transmission System
Notes:	802.11b/g/n RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0035
CC MO	15C	2412.0 - 2462.0	0.1493
CC MO	15C	2422.0 - 2452.0	0.0865

Single Modular Approval. Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-colocated with the composite DSS portion. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/14/2013)

Class II Permissive Change: this Class II Permissive Change is to extend the grant condition to portable condition under 5 mm test separation distance. This equipment should be installed and operated with a minimum distance of 0.5cm between the radiator and the users body. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.18 W/kg and 1.96 W/kg, respectively. C2PC to install this module to ASUS host with models - E403N, L403N, R416N and X400N as documented in this filing.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan

Date of Grant: 11/01/2016

Application Dated: 10/28/2016

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Digital Transmission System
Notes:	802.11b/g/n RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0035
CC MO	15C	2412.0 - 2462.0	0.1493
CC MO	15C	2422.0 - 2452.0	0.0865

Single Modular Approval. Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-colocated with the composite DSS portion. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/14/2013)

Class II Permissive Change: this Class II Permissive Change is to extend the grant condition to portable condition under 5 mm test separation distance. This equipment should be installed and operated with a minimum distance of 0.5cm between the radiator and the users body. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.18 W/kg and 1.96 W/kg, respectively. C2PC to install this module to ASUS host with models - E403N, L403N, R416N and X400N as documented in this filing.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 9017bsCwkRPAP74istLxKg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany

Date of Grant: 05/16/2014

Application Dated: 05/16/2014

Realtek Semiconductor Corp.

No. 2

Innovation Road II, Hsinchu Science Park

Hsinchu, 300
Taiwan

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Digital Transmission System
Notes:	802.11b/g/n RTL8192EE Combo module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0035
CC MO	15C	2412.0 - 2462.0	0.1493
CC MO	15C	2422.0 - 2452.0	0.0865

Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-colocated with the composite DSS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

This Class II Permissive Change adds the installation of this RF Module by end-users into the lenovo laptop (lenovo Notebook / Model: TP00066A) via 2-way BIOS lock function. This device must use a BIOS lock mechanism which ensures that it only operates with the host as specified in the Certification filing. The SAR data in this filing is applicable to demonstrate compliance for this specific host device as shown in this filing. The highest reported SAR for body-worn configuration (0 cm gap/direct touch) and simultaneous transmission exposure conditions are 0.47 W/kg and 0.77 W/kg, respectively

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan

Date of Grant: 05/16/2014

Application Dated: 05/16/2014

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Digital Transmission System
Notes:	802.11b/g/n RTL8192EE Combo module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0035
CC MO	15C	2412.0 - 2462.0	0.1493
CC MO	15C	2422.0 - 2452.0	0.0865

Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-colocated with the composite DSS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

This Class II Permissive Change adds the installation of this RF Module by end-users into the lenovo laptop (lenovo Notebook / Model: TP00066A) via 2-way BIOS lock function. This device must use a BIOS lock mechanism which ensures that it only operates with the host as specified in the Certification filing. The SAR data in this filing is applicable to demonstrate compliance for this specific host device as shown in this filing. The highest reported SAR for body-worn configuration (0 cm gap/direct touch) and simultaneous transmission exposure conditions are 0.47 W/kg and 0.77 W/kg, respectively

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 5p3RYi+R2EcdVu9SJS1XYg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany

Date of Grant: 05/16/2014

Application Dated: 05/16/2014

Realtek Semiconductor Corp.

No. 2

Innovation Road II, Hsinchu Science Park

Hsinchu, 300
Taiwan

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11b/g/n RTL8192EE Combo module

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0047

Output Power listed is the maximum conducted output power as indicated in the filing. The device can be self-colocated with the composite DTS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

This Class II Permissive Change adds the installation of this RF Module by end-users into the lenovo laptop (lenovo Notebook / Model: TP00066A) via 2-way BIOS lock function. This device must use a BIOS lock mechanism which ensures that it only operates with the host as specified in the Certification filing. The SAR data in this filing is applicable to demonstrate compliance for this specific host device as shown in this filing. The highest reported SAR for body-worn configuration (0 cm gap/direct touch) and simultaneous transmission exposure conditions are 0.47 W/kg and 0.77 W/kg, respectively.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan

Date of Grant: 05/16/2014

Application Dated: 05/16/2014

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11b/g/n RTL8192EE Combo module
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0047

Output Power listed is the maximum conducted output power as indicated in the filing. The device can be self-colocated with the composite DTS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

This Class II Permissive Change adds the installation of this RF Module by end-users into the lenovo laptop (lenovo Notebook / Model: TP00066A) via 2-way BIOS lock function. This device must use a BIOS lock mechanism which ensures that it only operates with the host as specified in the Certification filing. The SAR data in this filing is applicable to demonstrate compliance for this specific host device as shown in this filing. The highest reported SAR for body-worn configuration (0 cm gap/direct touch) and simultaneous transmission exposure conditions are 0.47 W/kg and 0.77 W/kg, respectively.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 3iCSyVaKVHyODOMLkiLTmw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany

Date of Grant: 07/24/2013

Application Dated: 07/24/2013

Realtek Semiconductor Corp.

No. 2

Innovation Road II, Hsinchu Science Park

Hsinchu, 300
Taiwan

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Digital Transmission System
Notes:	802.11bgn RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2402.0 - 2480.0	0.0035
CC MO	15C	2412.0 - 2462.0	0.1493
CC MO	15C	2422.0 - 2452.0	0.0865

Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-colocated with the composite DSS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Class II Permissive Change upgrades mobile to portable RF exposure configuration. Highest SAR value for body-worn configuration with highest gain PIFA antenna and 0.8 cm separation distance: 0.77 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan

Date of Grant: 07/24/2013

Application Dated: 07/24/2013

Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	TX2RTL8192EEBT

Name of Grantee:	Realtek Semiconductor Corp.

Equipment Class:	Digital Transmission System
Notes:	802.11bgn RTL8192EE Combo module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2402.0 - 2480.0	0.0035
CC MO	15C	2412.0 - 2462.0	0.1493
CC MO	15C	2422.0 - 2452.0	0.0865

Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-colocated with the composite DSS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Class II Permissive Change upgrades mobile to portable RF exposure configuration. Highest SAR value for body-worn configuration with highest gain PIFA antenna and 0.8 cm separation distance: 0.77 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:

802.11b/g/n RTL8192EE Combo module

by Realtek Semiconductor Corp.

Grantee Code: TX2 Product Code: RTL8192EEBT

Latest application date: 2016-11-01

Device Images

FCC ID Device Details

Operating Frequencies

Exhibits

Application Information

Applications

Equipment Authorization

Grants

TCB Grant - Application wtWSOymrQNglcMwxUU8Vzg==

EAS Grant - Application wtWSOymrQNglcMwxUU8Vzg==

TCB Grant - Application TtvmxlPQP6lfqO4yY9wboQ==

EAS Grant - Application TtvmxlPQP6lfqO4yY9wboQ==

TCB Grant - Application qJvvuzDrPxqR/MGIC0yX/g==

EAS Grant - Application qJvvuzDrPxqR/MGIC0yX/g==

TCB Grant - Application pD3MVstGTKOU9z+rNO2gjg==

EAS Grant - Application pD3MVstGTKOU9z+rNO2gjg==

TCB Grant - Application mZ8ooCP1ek3x6bobzeMpgQ==

EAS Grant - Application mZ8ooCP1ek3x6bobzeMpgQ==

TCB Grant - Application MHKeJ0urkIXqwXmIfseF7w==

EAS Grant - Application MHKeJ0urkIXqwXmIfseF7w==

TCB Grant - Application m2Y5Wpj26s4fNxRbqIbxaA==

EAS Grant - Application m2Y5Wpj26s4fNxRbqIbxaA==

TCB Grant - Application il35ztdeVSkHd0NyynpgCw==

EAS Grant - Application il35ztdeVSkHd0NyynpgCw==

TCB Grant - Application dzEs5dNNoZ4gyYh+2tD7YQ==

EAS Grant - Application dzEs5dNNoZ4gyYh+2tD7YQ==

TCB Grant - Application dX1DxHeM4n2l2HP8u01b+g==

EAS Grant - Application dX1DxHeM4n2l2HP8u01b+g==

TCB Grant - Application bxtK/2gbvfSrlBwyCNkBIA==

EAS Grant - Application bxtK/2gbvfSrlBwyCNkBIA==

TCB Grant - Application ac/3W7JcUyzC2doXLsQ0fw==

EAS Grant - Application ac/3W7JcUyzC2doXLsQ0fw==

TCB Grant - Application 9017bsCwkRPAP74istLxKg==

EAS Grant - Application 9017bsCwkRPAP74istLxKg==

TCB Grant - Application 5p3RYi+R2EcdVu9SJS1XYg==

EAS Grant - Application 5p3RYi+R2EcdVu9SJS1XYg==

TCB Grant - Application 3iCSyVaKVHyODOMLkiLTmw==

EAS Grant - Application 3iCSyVaKVHyODOMLkiLTmw==