FCC ID TX2-RTL8723AE

802.11b/g/n RTL8723AE Combo miniCard

by Realtek Semiconductor Corp.

Grantee Code: TX2   Product Code: RTL8723AE
Latest application date: 2012-02-16

FCC ID Device Details

FCC IDTX2-RTL8723AE
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeTX2
Product CodeRTL8723AE
Applicant BusinessRealtek Semiconductor Corp. 🇹🇼
Related Domains realtek.com
Equipment Class802.11b/g/n RTL8723AE Combo miniCard
Test FirmSporton International Inc

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2012-02-16
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2012-02-16
2402-2480 MHzOriginal Equipment2011-12-06
2412-2462 MHzOriginal Equipment2011-12-06

Exhibits

DocumentTypeAvailableFile
User Man_TX2-RTL8723AEUsers Manual2012-05-01PDF 221.7 KB
ManualUsers Manual2012-04-01PDF 359.6 KB
user manualUsers Manual2012-04-01PDF 359.6 KB
Int Pho_TX2-RTL8723AEInternal Photos2012-05-01PDF 548.7 KB
Ext Pho-1_TX2-RTL8723AEExternal Photos2012-05-01PDF 4.7 MB
Ext Pho-2_TX2-RTL8723AEExternal Photos2012-05-01PDF 3.1 MB
Label Smpl & Label Loc_TX2-RTL8723AEID Label/Location Info2011-12-06PDF 40.2 KB
TSup_TX2-RTL8723AETest Setup Photos2012-05-01PDF 492.1 KB
SAR Setup PhotoTest Setup Photos2012-04-01PDF 349.8 KB
Test Rpt (Co-located)_TX2-RTL8723AE_rev. 1Test Report2011-12-06PDF 323 KB
Test Rpt (DSS)_TX2-RTL8723AE_rev. 1Test Report2011-12-06PDF 1 MB
Test Rpt (DTS)_TX2-RTL8723AE_rev. 1Test Report2011-12-06PDF 1.2 MB
Authorization LetterCover Letter(s)2012-02-16PDF 25.5 KB
Authorization letterCover Letter(s)2012-02-16PDF 25.5 KB
PCII LetterCover Letter(s)2012-02-16PDF 82.5 KB
POACover Letter(s)2012-02-16PDF 26.9 KB
STC LetterCover Letter(s)2012-02-16PDF 27.6 KB
Confidentiality (Long-term)_TX2-RTL8723AECover Letter(s)2011-12-06PDF 74.9 KB
Confidentiality (Short-term)_TX2-RTL8723AECover Letter(s)2011-12-06PDF 97.4 KB
Coverletter-Ad-hoc Mode Declaration_TX2-RTL8723AECover Letter(s)2011-12-06PDF 229.7 KB
Coverletter-Modular Approval Request_TX2-RTL8723AECover Letter(s)2011-12-06PDF 40.3 KB
Coverletter-POA_TX2-RTL8723AECover Letter(s)2011-12-06PDF 76.2 KB
SAR report -1RF Exposure Info2012-02-16PDF 1 MB
SAR report -2RF Exposure Info2012-02-16PDF 88 KB
SAR report -3RF Exposure Info2012-02-16PDF 153.1 KB
SAR report -4RF Exposure Info2012-02-16PDF 1.2 MB
RF Exp MPE report_TX2-RTL8723AERF Exposure Info2011-12-06PDF 133.3 KB

Application Information

Application IDHi13Kae7ZR7O3OK0adtdEw==
Final Action Date2012-02-16
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0020109807
Model-RTL8723AE
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device Description802.11b/g/n RTL8723AE Combo miniCard
Responsible PartyDana Liaw, Project Manager, danaliaw@realtek.com , 886-3-5780211
Test FirmKathy Lin, Sporton International Inc, kathy@sporton.com.tw , 886-2-26962468
TCB Emailtcb@siemic.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date04/01/2012
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsC2PC to add SAR Evaluation with new antenna (WNC , DQ661500301) at 1.7cm test distance. Original Grant note: Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

Applications

Application IDDatePurpose
Hi13Kae7ZR7O3OK0adtdEw==2012-02-16Class II permissive change or modification of presently authorized equipment
7LMplq3LsTrDaHnyuof8Zw==2012-02-16Class II permissive change or modification of presently authorized equipment
vBZhGx1e545rUH57KuiL+w==2011-12-06Original Equipment
c50UFEBhMhZzpTtK/awCfQ==2011-12-06Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.014000015CCC
2402-2480 MHz0.014000015C
2412-2462 MHz0.191000015CCC
2412-2462 MHz0.191000015C

Grants

TCB Grant - Application vBZhGx1e545rUH57KuiL+w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 12/06/2011

Application Dated: 12/06/2011
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8723AE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11b/g/n RTL8723AE Combo miniCard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.014  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

EAS Grant - Application vBZhGx1e545rUH57KuiL+w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 12/06/2011

Application Dated: 12/06/2011
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8723AE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11b/g/n RTL8723AE Combo miniCard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.014  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.



TCB Grant - Application Hi13Kae7ZR7O3OK0adtdEw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 02/16/2012

Application Dated: 02/16/2012
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8723AE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11b/g/n RTL8723AE Combo miniCard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.014  

C2PC to add SAR Evaluation with new antenna (WNC , DQ661500301) at 1.7cm test distance.

Original Grant note:

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Hi13Kae7ZR7O3OK0adtdEw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 02/16/2012

Application Dated: 02/16/2012
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8723AE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11b/g/n RTL8723AE Combo miniCard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.014  

C2PC to add SAR Evaluation with new antenna (WNC , DQ661500301) at 1.7cm test distance.

Original Grant note:

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application c50UFEBhMhZzpTtK/awCfQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 12/06/2011

Application Dated: 12/06/2011
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8723AE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Digital Transmission System
Notes: 802.11b/g/n RTL8723AE Combo miniCard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.191  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

EAS Grant - Application c50UFEBhMhZzpTtK/awCfQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 12/06/2011

Application Dated: 12/06/2011
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8723AE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Digital Transmission System
Notes: 802.11b/g/n RTL8723AE Combo miniCard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.191  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.



TCB Grant - Application 7LMplq3LsTrDaHnyuof8Zw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 02/16/2012

Application Dated: 02/16/2012
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8723AE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Digital Transmission System
Notes: 802.11b/g/n RTL8723AE Combo miniCard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.191  

C2PC to add SAR Evaluation with new antenna (WNC , DQ661500301) at 1.7cm test distance.

The highest reported SAR value is 0.374 W/kg

Original Grant note: Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 7LMplq3LsTrDaHnyuof8Zw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 02/16/2012

Application Dated: 02/16/2012
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8723AE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Digital Transmission System
Notes: 802.11b/g/n RTL8723AE Combo miniCard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.191  

C2PC to add SAR Evaluation with new antenna (WNC , DQ661500301) at 1.7cm test distance.

The highest reported SAR value is 0.374 W/kg

Original Grant note: Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: