FCC ID TX2-RTL8723DE
802.11 b/g/n RTL8723DE Combo module
by Realtek Semiconductor Corp.
Grantee Code: TX2 Product Code: RTL8723DE
Latest application date: 2018-07-05
FCC ID Device Details
| FCC ID | TX2-RTL8723DE |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | TX2 |
| Product Code | RTL8723DE |
| Applicant Business | Realtek Semiconductor Corp. 🇹🇼 |
| Related Domains |  realtek.com |
| Equipment Class | 802.11 b/g/n RTL8723DE Combo module |
| Test Firm | SPORTON International Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-07-05 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-07-05 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2016-12-20 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2016-12-20 |
| 2402-2480 MHz | Original Equipment | 2016-06-06 |
| 2402-2480 MHz | Original Equipment | 2016-06-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2016-12-03 | PDF 2.5 MB |
| Internal Photo | Internal Photos | 2018-12-26 | PDF 768.8 KB |
| Internal Photo | Internal Photos | 2017-06-18 | PDF 376.7 KB |
| Internal Photos | Internal Photos | 2016-12-03 | PDF 478.2 KB |
| External Photo | External Photos | 2018-12-26 | PDF 958.6 KB |
| External Photo | External Photos | 2017-06-18 | PDF 314 KB |
| External Photos | External Photos | 2016-12-03 | PDF 975.6 KB |
| Label Info | ID Label/Location Info | 2016-06-06 | PDF 35.2 KB |
| Setup Photo | Test Setup Photos | 2018-12-26 | PDF 543.2 KB |
| Setup Photo - 2.4G | Test Setup Photos | 2018-12-26 | PDF 543.2 KB |
| Setup Photo - BLE | Test Setup Photos | 2018-12-26 | PDF 543.2 KB |
| Test Setup Photo | Test Setup Photos | 2017-06-18 | PDF 626.3 KB |
| Test Setup Photos | Test Setup Photos | 2016-12-03 | PDF 445.7 KB |
| Test Setup Photos SAR | Test Setup Photos | 2016-12-03 | PDF 144.7 KB |
| Test Report | Test Report | 2018-07-05 | PDF 2.7 MB |
| Test Report - 2.4G - 1 | Test Report | 2018-07-05 | PDF 4.7 MB |
| Test Report - 2.4G - 2 | Test Report | 2018-07-05 | PDF 3.2 MB |
| Test Report - BLE | Test Report | 2018-07-05 | PDF 1.8 MB |
| RF Test Report | Test Report | 2016-12-20 | PDF 1.5 MB |
| Radiated Emission co location | Test Report | 2016-12-20 | PDF 42.1 KB |
| Test Report RF Exposure | Test Report | 2016-12-20 | PDF 834.1 KB |
| Radiated Emission Co-location Report | Test Report | 2016-06-06 | PDF 106.3 KB |
| SAR Test Report | RF Exposure Info | 2016-06-06 | PDF 944.3 KB |
| SAR Test Report Appendix A | RF Exposure Info | 2016-06-06 | PDF 147.7 KB |
| SAR Test Report Appendix B | RF Exposure Info | 2016-06-06 | PDF 290.8 KB |
| SAR Test Report Appendix C | RF Exposure Info | 2016-06-06 | PDF 432 KB |
| Test Report 2.4G | Test Report | 2016-06-06 | PDF 5 MB |
| Test Report BT 2.1 | Test Report | 2016-06-06 | PDF 2.8 MB |
| Test Report BT 4.0 | Test Report | 2016-06-06 | PDF 1.2 MB |
| C2PC Letter | Cover Letter(s) | 2018-07-05 | PDF 65.5 KB |
| LTCR and STCR letter | Cover Letter(s) | 2018-07-05 | PDF 68.1 KB |
| Module Declaration Letter | Cover Letter(s) | 2018-07-05 | PDF 26.8 KB |
| POA | Cover Letter(s) | 2018-07-05 | PDF 62 KB |
| C2PC Letter | Cover Letter(s) | 2016-12-20 | PDF 78 KB |
| Confidentiality Letter | Cover Letter(s) | 2016-12-20 | PDF 80.8 KB |
| Doc Letter | Cover Letter(s) | 2016-12-20 | PDF 74.1 KB |
| Modular Approval Letter | Cover Letter(s) | 2016-12-20 | PDF 25.8 KB |
| POA | Cover Letter(s) | 2016-12-20 | PDF 75.4 KB |
| POA Grantee Contact Person | Cover Letter(s) | 2016-12-20 | PDF 57 KB |
| Confidentiality Letter | Cover Letter(s) | 2016-06-06 | PDF 65.6 KB |
| DoC | Cover Letter(s) | 2016-06-06 | PDF 58.4 KB |
| Modular Approval Letter | Cover Letter(s) | 2016-06-06 | PDF 25.5 KB |
| POA | Cover Letter(s) | 2016-06-06 | PDF 59.8 KB |
| RF Report | RF Exposure Info | 2016-12-20 | PDF 3 MB |
| RF Exposure Info | RF Exposure Info | 2016-06-06 | PDF 215.2 KB |
| Block Diagram Metadata only | Block Diagram | PDF 48.8 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 73.7 KB | |
| Block Diagram (2) Metadata only | Block Diagram | PDF 48.8 KB | |
| Schematic Diagram Metadata only | Schematics | PDF 166.4 KB | |
| Schematics Metadata only | Schematics | PDF 104.4 KB | |
| Schematics Metadata only | Schematics | PDF 200.9 KB | |
| Operational Description Metadata only | Operational Description | PDF 54.3 KB |
Application Information
| Application ID | kELOlUKIxM1Csh/tZxhtcQ== |
|---|---|
| Final Action Date | 2018-07-05 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0020109807 |
| Model | RTL8723DE |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11 b/g/n RTL8723DE Combo module |
| Responsible Party | Dana Liaw, Project Manager, danaliaw@realtek.com , 886-3-5780211 |
| Test Firm | Sharon Jiang, SPORTON International Inc., sharonjiang@sporton.com.tw  , 886-3-656-9065 |
| TCB Email | stuart.beck@nemko.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 12/26/2018 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change: The changes under this application are: (1) to add new antennas of the same types and lower gain from original approval, (2) to update for A+E Key board. Single Modular Approval. Power listed is conducted. This module is restricted to installation in products for use in mobile, fixed, and portable applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons, for mobile and fixed applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5-mm from all persons, for portable applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Approval is limited to antennas provided with this module, or having gain less than 3.5 dBi, as described in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for body and simultaneous transmission exposure conditions are: 0.67 W/kg and 0.67 W/kg respectively. This device has 20 and 40 MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| kELOlUKIxM1Csh/tZxhtcQ== | 2018-07-05 | Class II permissive change or modification of presently authorized equipment |
| T8BQoVm9KxU3r8dNYkSLKg== | 2018-07-05 | Class II permissive change or modification of presently authorized equipment |
| oZVD6wLDsfCpOy7PvOpEug== | 2016-12-20 | Class II permissive change or modification of presently authorized equipment |
| 0VxSdFlnzx8KpOuplluumg== | 2016-12-20 | Class II permissive change or modification of presently authorized equipment |
| ul0IuKF3LkC1OY7eRIJP1A== | 2016-06-06 | Original Equipment |
| S2Q5HbQPfi75lvjYDuP5hQ== | 2016-06-06 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application ul0IuKF3LkC1OY7eRIJP1A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 06/06/2016 Application Dated: 06/03/2016 |
| Realtek Semiconductor Corp. |
| No. 2 |
| Innovation Road II, Hsinchu Science Park |
| Hsinchu, 300 Taiwan |
| Attention: Dana Liaw , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TX2-RTL8723DE |
| Name of Grantee: | Realtek Semiconductor Corp. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11 b/g/n RTL8723DE Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 |
| Single Modular Approval. Power listed is conducted. This module is restricted to installation in products for use in mobile, fixed, and portable applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons, for mobile and fixed applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5-mm from all persons, for portable applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Approval is limited to antennas provided with this module, or having gain less than 3.5 dBi, as described in this filing.. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for body and simultaneous transmission exposure conditions are: <0.10 W/kg and 0.67 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ul0IuKF3LkC1OY7eRIJP1A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Realtek Semiconductor Corp. No. 2 Innovation Road II, Hsinchu Science Park Hsinchu, 300 Taiwan |
Date of Grant: 06/06/2016 Application Dated: 06/03/2016 |
| Attention: Dana Liaw , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TX2-RTL8723DE |
| Name of Grantee: | Realtek Semiconductor Corp. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11 b/g/n RTL8723DE Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 |
| Single Modular Approval. Power listed is conducted. This module is restricted to installation in products for use in mobile, fixed, and portable applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons, for mobile and fixed applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5-mm from all persons, for portable applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Approval is limited to antennas provided with this module, or having gain less than 3.5 dBi, as described in this filing.. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for body and simultaneous transmission exposure conditions are: <0.10 W/kg and 0.67 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 07/05/2018 Application Dated: 06/28/2018 |
| Realtek Semiconductor Corp. |
| No. 2 |
| Innovation Road II, Hsinchu Science Park |
| Hsinchu, 300 Taiwan |
| Attention: Dana Liaw , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TX2-RTL8723DE |
| Name of Grantee: | Realtek Semiconductor Corp. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11 b/g/n RTL8723DE Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 |
| Class II Permissive Change: The changes under this application are: (1) to add new antennas of the same types and lower gain from original approval, (2) to update for A+E Key board. Single Modular Approval. Power listed is conducted. This module is restricted to installation in products for use in mobile, fixed, and portable applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons, for mobile and fixed applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5-mm from all persons, for portable applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Approval is limited to antennas provided with this module, or having gain less than 3.5 dBi, as described in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for body and simultaneous transmission exposure conditions are: <0.10 W/kg and 0.67 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application T8BQoVm9KxU3r8dNYkSLKg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Realtek Semiconductor Corp. No. 2 Innovation Road II, Hsinchu Science Park Hsinchu, 300 Taiwan |
Date of Grant: 07/05/2018 Application Dated: 06/28/2018 |
| Attention: Dana Liaw , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TX2-RTL8723DE |
| Name of Grantee: | Realtek Semiconductor Corp. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11 b/g/n RTL8723DE Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 |
| Class II Permissive Change: The changes under this application are: (1) to add new antennas of the same types and lower gain from original approval, (2) to update for A+E Key board. Single Modular Approval. Power listed is conducted. This module is restricted to installation in products for use in mobile, fixed, and portable applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons, for mobile and fixed applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5-mm from all persons, for portable applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Approval is limited to antennas provided with this module, or having gain less than 3.5 dBi, as described in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for body and simultaneous transmission exposure conditions are: <0.10 W/kg and 0.67 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 06/06/2016 Application Dated: 06/03/2016 |
| Realtek Semiconductor Corp. |
| No. 2 |
| Innovation Road II, Hsinchu Science Park |
| Hsinchu, 300 Taiwan |
| Attention: Dana Liaw , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TX2-RTL8723DE |
| Name of Grantee: | Realtek Semiconductor Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g/n RTL8723DE Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2472.0 | 0.043 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Single Modular Approval. Power listed is conducted. This module is restricted to installation in products for use in mobile, fixed, and portable applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons, for mobile and fixed applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5-mm from all persons, for portable applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Approval is limited to antennas provided with this module, or having gain less than 3.5 dBi, as described in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for body and simultaneous transmission exposure conditions are: 0.67 W/kg and 0.67 W/kg respectively. This device has 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application S2Q5HbQPfi75lvjYDuP5hQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Realtek Semiconductor Corp. No. 2 Innovation Road II, Hsinchu Science Park Hsinchu, 300 Taiwan |
Date of Grant: 06/06/2016 Application Dated: 06/03/2016 |
| Attention: Dana Liaw , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TX2-RTL8723DE |
| Name of Grantee: | Realtek Semiconductor Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g/n RTL8723DE Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2472.0 | 0.043 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Single Modular Approval. Power listed is conducted. This module is restricted to installation in products for use in mobile, fixed, and portable applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons, for mobile and fixed applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5-mm from all persons, for portable applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Approval is limited to antennas provided with this module, or having gain less than 3.5 dBi, as described in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for body and simultaneous transmission exposure conditions are: 0.67 W/kg and 0.67 W/kg respectively. This device has 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/20/2016 Application Dated: 12/19/2016 |
| Realtek Semiconductor Corp. |
| No. 2 |
| Innovation Road II, Hsinchu Science Park |
| Hsinchu, 300 Taiwan |
| Attention: Dana Liaw , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TX2-RTL8723DE |
| Name of Grantee: | Realtek Semiconductor Corp. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11 b/g/n RTL8723DE Combo module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 |
| Single Modular Approval. Power listed is conducted. This module is restricted to installation in products for use in mobile, fixed, and portable applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons, for mobile and fixed applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5-mm from all persons, for portable applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Approval is limited to antennas provided with this module, or having gain less than 3.5 dBi, as described in this filing.. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for body and simultaneous transmission exposure conditions are: <0.10 W/kg and 0.67 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application oZVD6wLDsfCpOy7PvOpEug==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Realtek Semiconductor Corp. No. 2 Innovation Road II, Hsinchu Science Park Hsinchu, 300 Taiwan |
Date of Grant: 12/20/2016 Application Dated: 12/19/2016 |
| Attention: Dana Liaw , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TX2-RTL8723DE |
| Name of Grantee: | Realtek Semiconductor Corp. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11 b/g/n RTL8723DE Combo module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 |
| Single Modular Approval. Power listed is conducted. This module is restricted to installation in products for use in mobile, fixed, and portable applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons, for mobile and fixed applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5-mm from all persons, for portable applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Approval is limited to antennas provided with this module, or having gain less than 3.5 dBi, as described in this filing.. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for body and simultaneous transmission exposure conditions are: <0.10 W/kg and 0.67 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 07/05/2018 Application Dated: 06/28/2018 |
| Realtek Semiconductor Corp. |
| No. 2 |
| Innovation Road II, Hsinchu Science Park |
| Hsinchu, 300 Taiwan |
| Attention: Dana Liaw , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TX2-RTL8723DE |
| Name of Grantee: | Realtek Semiconductor Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g/n RTL8723DE Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC | 15C | 2412.0 - 2472.0 | 0.043 |
| Class II Permissive Change: The changes under this application are: (1) to add new antennas of the same types and lower gain from original approval, (2) to update for A+E Key board. Single Modular Approval. Power listed is conducted. This module is restricted to installation in products for use in mobile, fixed, and portable applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons, for mobile and fixed applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5-mm from all persons, for portable applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Approval is limited to antennas provided with this module, or having gain less than 3.5 dBi, as described in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for body and simultaneous transmission exposure conditions are: 0.67 W/kg and 0.67 W/kg respectively. This device has 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application kELOlUKIxM1Csh/tZxhtcQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Realtek Semiconductor Corp. No. 2 Innovation Road II, Hsinchu Science Park Hsinchu, 300 Taiwan |
Date of Grant: 07/05/2018 Application Dated: 06/28/2018 |
| Attention: Dana Liaw , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TX2-RTL8723DE |
| Name of Grantee: | Realtek Semiconductor Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g/n RTL8723DE Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC | 15C | 2412.0 - 2472.0 | 0.043 |
| Class II Permissive Change: The changes under this application are: (1) to add new antennas of the same types and lower gain from original approval, (2) to update for A+E Key board. Single Modular Approval. Power listed is conducted. This module is restricted to installation in products for use in mobile, fixed, and portable applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons, for mobile and fixed applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5-mm from all persons, for portable applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Approval is limited to antennas provided with this module, or having gain less than 3.5 dBi, as described in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for body and simultaneous transmission exposure conditions are: 0.67 W/kg and 0.67 W/kg respectively. This device has 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/20/2016 Application Dated: 12/19/2016 |
| Realtek Semiconductor Corp. |
| No. 2 |
| Innovation Road II, Hsinchu Science Park |
| Hsinchu, 300 Taiwan |
| Attention: Dana Liaw , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TX2-RTL8723DE |
| Name of Grantee: | Realtek Semiconductor Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g/n RTL8723DE Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2472.0 | 0.043 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Single Modular Approval. Power listed is conducted. This module is restricted to installation in products for use in mobile, fixed, and portable applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons, for mobile and fixed applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5-mm from all persons, for portable applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Approval is limited to antennas provided with this module, or having gain less than 3.5 dBi, as described in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for body and simultaneous transmission exposure conditions are: 0.67 W/kg and 0.67 W/kg respectively. This device has 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 0VxSdFlnzx8KpOuplluumg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Realtek Semiconductor Corp. No. 2 Innovation Road II, Hsinchu Science Park Hsinchu, 300 Taiwan |
Date of Grant: 12/20/2016 Application Dated: 12/19/2016 |
| Attention: Dana Liaw , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TX2-RTL8723DE |
| Name of Grantee: | Realtek Semiconductor Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g/n RTL8723DE Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2472.0 | 0.043 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Single Modular Approval. Power listed is conducted. This module is restricted to installation in products for use in mobile, fixed, and portable applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons, for mobile and fixed applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5-mm from all persons, for portable applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Approval is limited to antennas provided with this module, or having gain less than 3.5 dBi, as described in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for body and simultaneous transmission exposure conditions are: 0.67 W/kg and 0.67 W/kg respectively. This device has 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |