FCC ID TX2-RTL8822BE

802.11a/b/g/n/ac RTL8822BE Combo module

by Realtek Semiconductor Corp.

Grantee Code: TX2   Product Code: RTL8822BE
Latest application date: 2019-05-07

Device Images

FCC ID Device Details

FCC IDTX2-RTL8822BE
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeTX2
Product CodeRTL8822BE
Applicant BusinessRealtek Semiconductor Corp. 🇹🇼
Related Domains realtek.com newbtl.com
Equipment Class802.11a/b/g/n/ac RTL8822BE Combo module
Test FirmBTL Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2019-05-07
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-05-06
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-05-05
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-04-26
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2019-04-26
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-04-26
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-03-25
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2019-03-25
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-03-25
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2019-03-22
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-03-22
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-03-22
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-02-12
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-02-12
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2019-02-12
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-02-05
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-02-05
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2019-02-05
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-02-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-02-02
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2019-02-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-02-01
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-02-01
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2019-02-01
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-01-30
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2019-01-30
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-01-30
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-01-23
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-01-23
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2019-01-23
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2019-01-22
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-01-22
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-01-22
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2019-01-20
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-01-20
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-01-20
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-01-19
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2019-01-19
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-01-19
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-01-03
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-01-03
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2019-01-03
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-12-31
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-12-31
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-12-31
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-11-27
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-11-27
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-11-27
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-10-09
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-10-09
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-10-09
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-10-08
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-10-08
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-10-08
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-10-05
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-10-05
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-10-05
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-09-21
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-09-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-09-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-09-12
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-09-12
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-09-12
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-07-04
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-07-04
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-07-04
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-07-04
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-07-04
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-07-04
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-07-03
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-07-03
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-07-03
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-07-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-07-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-07-02
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-05-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-05-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-05-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-04-24
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-04-24
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-04-24
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-03-30
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-03-30
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-03-30
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-03-30
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-03-30
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-03-30
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-03-29
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-03-29
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-03-29
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-03-27
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-03-27
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-03-27
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-03-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-03-21
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-03-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-02-28
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-02-28
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-02-28
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-02-27
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-02-27
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-02-27
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-02-06
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-02-06
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-02-06
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-02-06
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-02-06
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-02-06
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-01-11
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-01-11
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-01-11
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-12-21
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2017-12-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-12-21
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2017-12-20
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-12-20
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-12-20
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2017-12-19
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-12-19
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-12-19
5150-5240 MHzClass II permissive change or modification of presently authorized equipment2017-11-29
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-11-29
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-11-29
5150-5240 MHzClass II permissive change or modification of presently authorized equipment2017-11-28
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2017-11-28
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-11-28
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-11-28
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-11-28
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-11-28
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-11-13
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-11-13
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2017-11-13
5150-5240 MHzClass II permissive change or modification of presently authorized equipment2017-10-30
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-10-30
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-10-30
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-09-21
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2017-09-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-09-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-07-11
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-07-11
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2017-07-11
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-03-02
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2017-03-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-03-02
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2017-01-13
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-01-13
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2017-01-13
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-12-28
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2016-12-28
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2016-12-28
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2016-11-15
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2016-11-15
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-11-15
2402-2480 MHzOriginal Equipment2016-08-29
2402-2480 MHzOriginal Equipment2016-08-29
5180-5240 MHzOriginal Equipment2016-08-29

Exhibits

DocumentTypeAvailableFile
Users Manual-1Users Manual2019-10-28PDF 3.7 MB
Users Manual-2Users Manual2019-10-28PDF 4.3 MB
UM_765879-001_b_0305Users Manual2019-10-13PDF 1.6 MB
UM_L25269-001Users Manual2019-10-13PDF 2 MB
UM_L25269-051Users Manual2019-10-13PDF 2 MB
User ManualUsers Manual2019-09-21PDF 1.8 MB
User Manual Regulatory EnglishUsers Manual2019-09-21PDF 1.8 MB
User ManualUsers Manual2019-09-18PDF 1.7 MB
User Manual - RegulatoryUsers Manual2019-09-18PDF 1.7 MB
Users Manual-1Users Manual2019-08-11PDF 1.1 MB
Users Manual-2Users Manual2019-08-11PDF 2.6 MB
User ManualUsers Manual2019-08-03PDF 3.8 MB
User Manual-StatementUsers Manual2019-08-03PDF 3.6 MB
User Manual-1Users Manual2019-08-02PDF 1.9 MB
User Manual-2Users Manual2019-08-02PDF 1.8 MB
User Manual-StatementUsers Manual2019-08-02PDF 3.6 MB
Host User Manual (TPN-W143)Users Manual2019-07-31PDF 4.3 MB
Host User Manual RegulatoryUsers Manual2019-07-31PDF 1.7 MB
User Manual (TPN-W143)Users Manual2019-07-31PDF 4.3 MB
Host User ManualUsers Manual2019-07-29PDF 5.9 MB
Host User ManualUsers Manual2019-07-22PDF 2.7 MB
Host User Manual RegulatoryUsers Manual2019-07-22PDF 1.7 MB
Host User Manual TPN-W139Users Manual2019-07-22PDF 2.7 MB
Host User ManualUsers Manual2019-07-21PDF 1.7 MB
User ManualUsers Manual2019-07-21PDF 4.8 MB
User Manual_RegulatoryUsers Manual2019-07-21PDF 1.7 MB
User ManualUsers Manual2019-07-18PDF 2 MB
User Manual StatementUsers Manual2019-07-18PDF 85.4 KB
Safety Guide English User ManualUsers Manual2019-07-02PDF 1.9 MB
Safety Guide English User ManualUsers Manual2019-06-29PDF 1.9 MB
User Manual - Safety GuideUsers Manual2019-06-29PDF 1.9 MB
Host User GuideUsers Manual2019-05-26PDF 5.4 MB
Host User Guide RegulatoryUsers Manual2019-05-26PDF 1.8 MB
Host User ManualUsers Manual2019-04-07PDF 1.6 MB
Host User Manual Regulatory EnglishUsers Manual2019-04-07PDF 1.9 MB
Host User ManualUsers Manual2019-04-06PDF 1.6 MB
Host User ManualUsers Manual2019-04-03PDF 1.6 MB
Host User Manual RegulatoryUsers Manual2019-04-03PDF 1.9 MB
Host User ManualUsers Manual2019-03-20PDF 5.4 MB
Host User Manual RegulatoryUsers Manual2019-03-20PDF 1.8 MB
Host User Manual Regulatory EnglishUsers Manual2019-03-20PDF 1.8 MB
User ManualUsers Manual2019-03-12PDF 3.6 MB
Internal PhotosInternal Photos2019-10-28PDF 4.3 MB
Internal PhotosInternal Photos2019-10-13PDF 582.7 KB
Internal Photos 1Internal Photos2019-09-21PDF 5.2 MB
Internal Photos 2Internal Photos2019-09-21PDF 5.2 MB
Internal Photos 3Internal Photos2019-09-21PDF 5.4 MB
Internal Photos 4Internal Photos2019-09-21PDF 3.5 MB
Internal Photos HSN-I30C Part 1Internal Photos2019-09-18PDF 5.5 MB
Internal Photos HSN-I30C Part 2Internal Photos2019-09-18PDF 5.4 MB
Internal Photos HSN-I30C Part 3Internal Photos2019-09-18PDF 5.5 MB
Internal Photos HSN-I30C Part 4Internal Photos2019-09-18PDF 1.9 MB
Internal PhotosInternal Photos2019-08-11PDF 4 MB
Internal photosInternal Photos2019-08-03PDF 929.6 KB
Internal photosInternal Photos2019-08-02PDF 767.4 KB
Host Internal Photos (TPN-W143)Internal Photos2019-07-31PDF 3 MB
Internal PhotosInternal Photos2019-07-29PDF 1.7 MB
Internal PhotosInternal Photos2019-07-22PDF 2.1 MB
Internal Photos (TPN-W139, RTL8822BE)Internal Photos2019-07-22PDF 2.1 MB
Internal PhotosInternal Photos2019-07-21PDF 1.9 MB
Internal photosInternal Photos2019-07-20PDF 933.9 KB
Internal PhotosInternal Photos2019-07-18PDF 775.3 KB
Internal PhotosInternal Photos2019-07-02PDF 2.8 MB
Internal PhotosInternal Photos2019-06-29PDF 2.9 MB
Host Internal PhotosInternal Photos2019-05-26PDF 4.4 MB
Internal PhotosInternal Photos2019-04-07PDF 2.8 MB
Internal PhotosInternal Photos2019-04-06PDF 2.7 MB
Internal PhotosInternal Photos2019-04-03PDF 5.5 MB
Host Internal PhotoInternal Photos2019-03-20PDF 3.1 MB
Host Internal PhotosInternal Photos2019-03-20PDF 3.1 MB
Internal photosInternal Photos2019-03-12PDF 396 KB
External PhotosExternal Photos2019-10-28PDF 1.2 MB
External PhotosExternal Photos2019-10-13PDF 468.5 KB
External PhotosExternal Photos2019-09-21PDF 2.3 MB
External PhotosExternal Photos2019-09-18PDF 2 MB
External PhotosExternal Photos2019-08-11PDF 2.3 MB
External photosExternal Photos2019-08-03PDF 287.5 KB
External photosExternal Photos2019-08-02PDF 276.7 KB
Host External Photos (TPN-W143)External Photos2019-07-31PDF 2.2 MB
External PhotosExternal Photos2019-07-29PDF 1.9 MB
External PhotosExternal Photos2019-07-22PDF 3.6 MB
External Photos (TPN-W139, RTL8822BE)External Photos2019-07-22PDF 3.6 MB
External PhotosExternal Photos2019-07-21PDF 2.2 MB
External photosExternal Photos2019-07-20PDF 478.8 KB
External PhotosExternal Photos2019-07-18PDF 732.8 KB
External PhotosExternal Photos2019-07-02PDF 3.7 MB
External PhotosExternal Photos2019-06-29PDF 3.6 MB
Host External PhotosExternal Photos2019-05-26PDF 1.8 MB
External PhotosExternal Photos2019-04-07PDF 3 MB
External PhotosExternal Photos2019-04-06PDF 2.6 MB
External PhotoExternal Photos2019-04-03PDF 3.1 MB
External PhotosExternal Photos2019-04-03PDF 3.1 MB
Host External PhotoExternal Photos2019-03-20PDF 3.3 MB
Host External PhotosExternal Photos2019-03-20PDF 3.3 MB
External photoExternal Photos2019-03-12PDF 533.9 KB
ID Label/Location InfoID Label/Location Info2019-05-07PDF 722.5 KB
ID Label/Location InfoID Label/Location Info2019-04-26PDF 322.9 KB
Host Label InfoID Label/Location Info2019-03-25PDF 101.8 KB
Host Label Info HSN-I30CID Label/Location Info2019-03-22PDF 101.7 KB
ID Label/Location InfoID Label/Location Info2019-02-12PDF 168.2 KB
Label and locationID Label/Location Info2019-02-05PDF 177.1 KB
Label and locationID Label/Location Info2019-02-02PDF 177.5 KB
Test Setup Photos_SARTest Setup Photos2019-10-28PDF 157.1 KB
Test Setup Photos_SARTest Setup Photos2019-10-13PDF 763.8 KB
Test Setup Photos RF ExposureTest Setup Photos2019-09-21PDF 27.7 KB
Test Setup Photos RF ExposureTest Setup Photos2019-09-18PDF 31.5 KB
Test Setup PhotosTest Setup Photos2019-08-11PDF 166.1 KB
SAR Test set-up photoTest Setup Photos2019-08-03PDF 417.9 KB
SAR Test set-up photoTest Setup Photos2019-08-02PDF 531.4 KB
Test Setup Photos RF ExposureTest Setup Photos2019-07-31PDF 56.2 KB
Test Setup Photos RF ExposureTest Setup Photos2019-07-29PDF 72.4 KB
RF Exposure (TPN-W139) Test Setup PhotosTest Setup Photos2019-07-22PDF 89.4 KB
Test Setup Photos RF ExposureTest Setup Photos2019-07-22PDF 89.4 KB
Test Setup Photos RF ExposureTest Setup Photos2019-07-21PDF 76.5 KB
Test Setup RF ExposureTest Setup Photos2019-07-21PDF 76.5 KB
SAR Test set-up photoTest Setup Photos2019-07-20PDF 597.5 KB
SAR Test Set-Up PhotosTest Setup Photos2019-07-18PDF 458 KB
Test Setup Photos RF ExposureTest Setup Photos2019-07-02PDF 29.2 KB
Test Setup Photos RF ExposureTest Setup Photos2019-05-26PDF 92.3 KB
Test Setup Photos RF ExposureTest Setup Photos2019-04-07PDF 33.1 KB
Test Setup Photos RF ExposureTest Setup Photos2019-04-06PDF 33.7 KB
Test Setup Photos RF ExposureTest Setup Photos2019-04-03PDF 37.8 KB
Test Setup Photos RF ExposureTest Setup Photos2019-03-20PDF 92.3 KB
SAR Test set-up photoTest Setup Photos2019-03-12PDF 442.2 KB
Test Report_SARRF Exposure Info2019-05-07PDF 1.1 MB
Test Report_SAR_Appendix ARF Exposure Info2019-05-07PDF 290.9 KB
Test Report_SAR_Appendix BRF Exposure Info2019-05-07PDF 259.8 KB
Test Report_SAR_Appendix CRF Exposure Info2019-05-07PDF 4.5 MB
SAR Test ReportRF Exposure Info2019-04-26PDF 969 KB
SAR Test ReportRF Exposure Info2019-02-12PDF 1.1 MB
SAR Test Report-1RF Exposure Info2019-02-05PDF 2.4 MB
SAR Test Report-2RF Exposure Info2019-02-05PDF 3.9 MB
SAR Test Report-1RF Exposure Info2019-02-02PDF 3.9 MB
SAR Test Report-2RF Exposure Info2019-02-02PDF 5.1 MB
Authorization LetterCover Letter(s)2019-05-07PDF 79.1 KB
Class II permissive change format letterCover Letter(s)2019-05-07PDF 113.6 KB
FCC Power Inconsistency Declaration LetterCover Letter(s)2019-05-07PDF 154.8 KB
confidentialityCover Letter(s)2019-05-07PDF 137.9 KB
Wi-Fi Channel 12 and 13 Declaration LetterCover Letter(s)2019-05-06PDF 106.6 KB
confidentialityCover Letter(s)2019-05-06PDF 152.1 KB
Class II permissive change letterCover Letter(s)2019-04-26PDF 197.1 KB
ConfidentialityCover Letter(s)2019-04-26PDF 87.8 KB
Response to Inquiry to FCC Tracking Number 488193Cover Letter(s)2019-04-26PDF 111.4 KB
agent auth letterCover Letter(s)2019-04-26PDF 104.2 KB
Class II Permissive Change LetterCover Letter(s)2019-03-25PDF 200.1 KB
Confidentiality Request LetterCover Letter(s)2019-03-25PDF 216.7 KB
POACover Letter(s)2019-03-25PDF 201.2 KB
C2PC Cover Letter (HSN-I30C)Cover Letter(s)2019-03-22PDF 200.1 KB
C2PC Letter, Confidential Letter, and POA Metadata onlyCover Letter(s)2019-03-22PDF 216.7 KB
Confidential Request LetterCover Letter(s)2019-03-22PDF 216.7 KB
POACover Letter(s)2019-03-22PDF 201.2 KB
10. FCC Power Inconsistency Declaration LetterCover Letter(s)2019-02-12PDF 102.7 KB
Authorization LetterCover Letter(s)2019-02-12PDF 65.8 KB
Class II Permissive Change LetterCover Letter(s)2019-02-12PDF 34.7 KB
ConfidentialityCover Letter(s)2019-02-12PDF 83.7 KB
FCC Power Inconsistency Declaration LetterCover Letter(s)2019-02-12PDF 102.7 KB
Authorization LetterCover Letter(s)2019-02-05PDF 113.5 KB
Class II Permissive Change Request LetterCover Letter(s)2019-02-05PDF 167.3 KB
POACover Letter(s)2019-02-05PDF 29 KB
RSE Justification LetterCover Letter(s)2019-02-05PDF 181.4 KB
STC LetterCover Letter(s)2019-02-05PDF 109.7 KB
Authorization LetterCover Letter(s)2019-02-02PDF 113.5 KB
Class II Permissive Change Request LetterCover Letter(s)2019-02-02PDF 196.5 KB
POACover Letter(s)2019-02-02PDF 174 KB
RSE Justification LetterCover Letter(s)2019-02-02PDF 212 KB
STC LetterCover Letter(s)2019-02-02PDF 109.4 KB
Appendix B_DAE Probe Cal. CertificateRF Exposure Info2019-04-26PDF 3.1 MB
Appendix C_Phantom Description Dipole Cal. CertificateRF Exposure Info2019-04-26PDF 1.9 MB
RF ExposureRF Exposure Info2019-03-25PDF 1.2 MB
RF Exposure Appendix ARF Exposure Info2019-03-25PDF 372.9 KB
RF Exposure Appendix BRF Exposure Info2019-03-25PDF 410.3 KB
RF Exposure Appendix CRF Exposure Info2019-03-25PDF 1.8 MB
RF ExposureRF Exposure Info2019-03-22PDF 1.2 MB
RF Exposure Appendix ARF Exposure Info2019-03-22PDF 365.8 KB
RF Exposure Appendix BRF Exposure Info2019-03-22PDF 355.7 KB
RF Exposure Appendix CRF Exposure Info2019-03-22PDF 1.8 MB
Appendix A. SAR Plots of System VerificationRF Exposure Info2019-02-12PDF 686.3 KB
Appendix B. SAR Plots of SAR MeasurementRF Exposure Info2019-02-12PDF 229.2 KB
Appendix C. Calibration Certificate for Probe and DipoleRF Exposure Info2019-02-12PDF 1.7 MB

Application Information

Application IDzUU9GwXzlDDHixCqmW/iNQ==
Final Action Date2019-05-07
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0020109807
ModelRTL8822BE
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description802.11a/b/g/n/ac RTL8822BE Combo module
Responsible PartyDana Liaw, Project Manager, danaliaw@realtek.com , 886-3-5780211
AgentMandy Mandy Mandy, BTL Inc., mandy.wang@newbtl.com , 86-769-83183000
Technical ContactSteven Lu, BTL Inc., steven@newbtl.com , 86-769-83183000
Non-Technical ContactMandy Wang, BTL Inc., mandy.wang@newbtl.com , 86-769-83183000
Test FirmSophia Huang, BTL Inc., Sophia.huang@newbtl.com , +86-769-83183000
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date10/28/2019
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change: This change is to incorporate this Module into portable host(Brand: Lenovo, Model Number: Lenovo IdeaPad S540-15IWL GTX) and as described in this filing) and to add 1-group new antennas as described in this filing. The highest reported SAR for body, simultaneous transmission conditions are 1.54 W/kg, 0.80 W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.

Applications

Application IDDatePurpose
zUU9GwXzlDDHixCqmW/iNQ==2019-05-07Class II permissive change or modification of presently authorized equipment
OsqdNXPtf2iUrY8Y10lURQ==2019-05-06Class II permissive change or modification of presently authorized equipment
gCGdI2lSPGyIQWmOD+OYrA==2019-05-05Class II permissive change or modification of presently authorized equipment
poxftdqkeEK/X9v7XBFszA==2019-04-26Class II permissive change or modification of presently authorized equipment
FFkwuJKWs53Baip1nV1m4w==2019-04-26Class II permissive change or modification of presently authorized equipment
BF7PIghtPtxZd+ENJd4/WQ==2019-04-26Class II permissive change or modification of presently authorized equipment
adnLjrdyeEfLlP7chuAjGg==2019-03-25Class II permissive change or modification of presently authorized equipment
TwVleF/4emISJz/rm59AYg==2019-03-25Class II permissive change or modification of presently authorized equipment
KYoQ/I+cpbHkNe5KSH1tiQ==2019-03-25Class II permissive change or modification of presently authorized equipment
rr6FdQEMGdTxxNe3w+7YmA==2019-03-22Class II permissive change or modification of presently authorized equipment
Tuw1EQigPVGfeR8Td6ZlSQ==2019-03-22Class II permissive change or modification of presently authorized equipment
PocrpNMQJWsQVc5A5FgFzw==2019-03-22Class II permissive change or modification of presently authorized equipment
p2l0p8w5JkNWFso4hTv8Qw==2019-02-12Class II permissive change or modification of presently authorized equipment
EF0WO9gSNAPvShvjOIXnFA==2019-02-12Class II permissive change or modification of presently authorized equipment
6XDiXgZ/05TkNknmpzzTeA==2019-02-12Class II permissive change or modification of presently authorized equipment
s1AmJDufThUBQZOradbR9w==2019-02-05Class II permissive change or modification of presently authorized equipment
rOYz88z8QhXk/5tyS8dh/w==2019-02-05Class II permissive change or modification of presently authorized equipment
iXwydqPJJVqnc1wBuWIs9g==2019-02-05Class II permissive change or modification of presently authorized equipment
oNYSDeLaO8jNGeovVmY2og==2019-02-02Class II permissive change or modification of presently authorized equipment
7wyuns/+NYX59RdcUJxaAw==2019-02-02Class II permissive change or modification of presently authorized equipment
4dNz0aJVTA6LMl8+SL6JjA==2019-02-02Class II permissive change or modification of presently authorized equipment
VjbKIbtqidVl6093kSZWHQ==2019-02-01Class II permissive change or modification of presently authorized equipment
2WHNikP/4im1LPlkH2ZhzQ==2019-02-01Class II permissive change or modification of presently authorized equipment
00hBw4z4gIzzeLCPx2qCzw==2019-02-01Class II permissive change or modification of presently authorized equipment
aeVXSuh5GiBTAzwuRNqgRg==2019-01-30Class II permissive change or modification of presently authorized equipment
YpQSI1PhqgzHP053jqfcBg==2019-01-30Class II permissive change or modification of presently authorized equipment
197UWakyjaRbDKGNQINglQ==2019-01-30Class II permissive change or modification of presently authorized equipment
pNIE1mD2vXV+3xyO9Iq8Yg==2019-01-23Class II permissive change or modification of presently authorized equipment
nmFe7+idZrX2JeNsXxaZjw==2019-01-23Class II permissive change or modification of presently authorized equipment
P3AULlxRcdFAaaflcolD8A==2019-01-23Class II permissive change or modification of presently authorized equipment
xSzs9j5+qQEE/iZVDBfIWg==2019-01-22Class II permissive change or modification of presently authorized equipment
Z918+/G6qhfXfsxnQKkR5g==2019-01-22Class II permissive change or modification of presently authorized equipment
JhiMo15azkzky1BzVvgQyw==2019-01-22Class II permissive change or modification of presently authorized equipment
N3N8W9pPNqTivUKSXuR53w==2019-01-20Class II permissive change or modification of presently authorized equipment
HFn9jWJ6VQZSVnxFoA+VMA==2019-01-20Class II permissive change or modification of presently authorized equipment
CT0e4wdf+vNZkwQboeyOsQ==2019-01-20Class II permissive change or modification of presently authorized equipment
o44/Ynu3g7ufpEgX1Is3fg==2019-01-19Class II permissive change or modification of presently authorized equipment
mngDWIvmGyvwq1Tk1UtS6g==2019-01-19Class II permissive change or modification of presently authorized equipment
fXUCbdQQxLjP9NbXUqO48w==2019-01-19Class II permissive change or modification of presently authorized equipment
v8RGXGKc1axZEezxKksPpw==2019-01-03Class II permissive change or modification of presently authorized equipment
o2TRkVhkmB3oM2+o8QTIHA==2019-01-03Class II permissive change or modification of presently authorized equipment
FLTz3eWgX0mcBfGhSzCyzQ==2019-01-03Class II permissive change or modification of presently authorized equipment
rFyOdZ/O2yvqJYlvMngG5w==2018-12-31Class II permissive change or modification of presently authorized equipment
aD3GfFxxG6D8dUb4nmpd/w==2018-12-31Class II permissive change or modification of presently authorized equipment
DPMlZa4xjE/oqmnKQ6y+VQ==2018-12-31Class II permissive change or modification of presently authorized equipment
fP90a678GHoG9rEP2sNC0Q==2018-11-27Class II permissive change or modification of presently authorized equipment
R6a5NhT1at1H5Jnkkvzrsw==2018-11-27Class II permissive change or modification of presently authorized equipment
I7Pk9x4Jz6mXmeQ50p/7PQ==2018-11-27Class II permissive change or modification of presently authorized equipment
DWnyIFaiVrWZY9z2iMQkhQ==2018-10-09Class II permissive change or modification of presently authorized equipment
5tD5gBmDBOrAJFhiGAr05Q==2018-10-09Class II permissive change or modification of presently authorized equipment
2cZUJO6APPgASz2zKgSaYA==2018-10-09Class II permissive change or modification of presently authorized equipment
k3vsT/6XWiDJ5ug2SeD+0A==2018-10-08Class II permissive change or modification of presently authorized equipment
N38GqfMkm0iY6Y0CJzYi4w==2018-10-08Class II permissive change or modification of presently authorized equipment
7dqgaoWAathYVnPViaSJgQ==2018-10-08Class II permissive change or modification of presently authorized equipment
XOIy144DNAc3bTQaKkb6xQ==2018-10-05Class II permissive change or modification of presently authorized equipment
Ry7CJyrD/62i9vr+IW2O5w==2018-10-05Class II permissive change or modification of presently authorized equipment
Oqg6oxSwx+VCJOTXmoZouA==2018-10-05Class II permissive change or modification of presently authorized equipment
ZqkQM5+kBfpbqVbQFyGXTg==2018-09-21Class II permissive change or modification of presently authorized equipment
RjbM55N3jocOJ22G/yiAdQ==2018-09-21Class II permissive change or modification of presently authorized equipment
8Tmq2K2hs7ItqTxIayVD2g==2018-09-21Class II permissive change or modification of presently authorized equipment
i+x3w7i2hpIVil8wUOHu9A==2018-09-12Class II permissive change or modification of presently authorized equipment
SitcjPWKpmdJlDOQbTQcmw==2018-09-12Class II permissive change or modification of presently authorized equipment
GE0/pK1lm6fI/aTGfoJvqg==2018-09-12Class II permissive change or modification of presently authorized equipment
ebs+GU6mAl9FzCFZwdrTbA==2018-07-04Class II permissive change or modification of presently authorized equipment
VBgrO53sNuyNY/0nCN776Q==2018-07-04Class II permissive change or modification of presently authorized equipment
QuPKctkd8Huw4he2L2o0Vw==2018-07-04Class II permissive change or modification of presently authorized equipment
5VEVtLN3rKMSXrloMvqX6w==2018-07-04Class II permissive change or modification of presently authorized equipment
2XsoPZewwlryVNTc5/iD5Q==2018-07-04Class II permissive change or modification of presently authorized equipment
+cC9Y+hQgsGCL3e6bG7cbA==2018-07-04Class II permissive change or modification of presently authorized equipment
xXG32pyo4ZYHPrtds1lj+g==2018-07-03Class II permissive change or modification of presently authorized equipment
EGgt434+3p+wLTDlwRpJfA==2018-07-03Class II permissive change or modification of presently authorized equipment
6BvZlcwwRGAN519GLBc2aA==2018-07-03Class II permissive change or modification of presently authorized equipment
Ok5XTTwXEph3rTFiD9wblA==2018-07-02Class II permissive change or modification of presently authorized equipment
ONlgY7UfIDU7JGel8Qxblg==2018-07-02Class II permissive change or modification of presently authorized equipment
0kkQqOJ8UoGgeY2qfkM5Og==2018-07-02Class II permissive change or modification of presently authorized equipment
dHqRxzgbyEmYBVoWw4rRjg==2018-05-02Class II permissive change or modification of presently authorized equipment
L57ni/MaKkD+ujqwHr3ytw==2018-05-02Class II permissive change or modification of presently authorized equipment
EHpH5n1bY1hkudU0S8iNCg==2018-05-02Class II permissive change or modification of presently authorized equipment
y8QSpMIAJ0BXiHQq3Ca9Uw==2018-04-24Class II permissive change or modification of presently authorized equipment
2nssSkd7U0poQ2CqBY7wUw==2018-04-24Class II permissive change or modification of presently authorized equipment
0noWs+8/t0XxMAEX6o+mcA==2018-04-24Class II permissive change or modification of presently authorized equipment
ypQcrSsF+9vFHi7u7UNCZQ==2018-03-30Class II permissive change or modification of presently authorized equipment
xvlHxMP2t2tcAWi9jz4Hcg==2018-03-30Class II permissive change or modification of presently authorized equipment
qDcBgJG8KeDFlTnsDlMqng==2018-03-30Class II permissive change or modification of presently authorized equipment
jKwLGDhTs3Fag4OZBakWTg==2018-03-30Class II permissive change or modification of presently authorized equipment
FbNj8TWKcLMWntWvNJfeYw==2018-03-30Class II permissive change or modification of presently authorized equipment
6HwTGzaTEdOnm0bXOLoU/A==2018-03-30Class II permissive change or modification of presently authorized equipment
zojGzQ1ViLsXqZXgrda+6Q==2018-03-29Class II permissive change or modification of presently authorized equipment
pe7peJ8JpcEr3eLX9UtKmQ==2018-03-29Class II permissive change or modification of presently authorized equipment
SSIAlZdYCoJGSNnXmKzIOw==2018-03-29Class II permissive change or modification of presently authorized equipment
QbLADu/cgKd//foG6r67kw==2018-03-27Class II permissive change or modification of presently authorized equipment
CHuGpGrkc4s4XtcNAUKSPQ==2018-03-27Class II permissive change or modification of presently authorized equipment
2XCuOFPiF43I2pnLRJAKyA==2018-03-27Class II permissive change or modification of presently authorized equipment
z5/N6rXWh1TEL2hCZwFo+g==2018-03-21Class II permissive change or modification of presently authorized equipment
jeNdLk/6CF35Dr3h3oWgaQ==2018-03-21Class II permissive change or modification of presently authorized equipment
TUce9chIluo3J0Bjx4iz0g==2018-03-21Class II permissive change or modification of presently authorized equipment
AjzxmX5cDGH8mMf4YVhyeA==2018-02-28Class II permissive change or modification of presently authorized equipment
4vOlHtYH6thVEDEUKZhUZg==2018-02-28Class II permissive change or modification of presently authorized equipment
0J7PXFmF+jy+WZjCM2iefQ==2018-02-28Class II permissive change or modification of presently authorized equipment
SX/3sprJWKp4CMceindT/w==2018-02-27Class II permissive change or modification of presently authorized equipment
KTkZxIpXiXulPeHxF06sjw==2018-02-27Class II permissive change or modification of presently authorized equipment
0vmYySLApX15S0ew4lZNGQ==2018-02-27Class II permissive change or modification of presently authorized equipment
jvG6SAIlNn73TnZshE/CHw==2018-02-06Class II permissive change or modification of presently authorized equipment
SbiJecn/18gPr3GeVRN+Yg==2018-02-06Class II permissive change or modification of presently authorized equipment
Fgckpr+UOSXFIh0nhvLG/g==2018-02-06Class II permissive change or modification of presently authorized equipment
E4/GLDq1bEAVq8KUYBVT3Q==2018-02-06Class II permissive change or modification of presently authorized equipment
84vuoxCTmxSxHtztQxY7sA==2018-02-06Class II permissive change or modification of presently authorized equipment
+UDrjs0G1dZlD8RSRP9buQ==2018-02-06Class II permissive change or modification of presently authorized equipment
sKG2wuVDmuwlxAzyIBSnXA==2018-01-11Class II permissive change or modification of presently authorized equipment
pL1n5gnktUrhCU8MFod2aA==2018-01-11Class II permissive change or modification of presently authorized equipment
aAdrRMK4wTGi7vQM3SJjNw==2018-01-11Class II permissive change or modification of presently authorized equipment
s0HiDLl/3JI8lWQysN2Y/A==2017-12-21Class II permissive change or modification of presently authorized equipment
O8UQcLYTej0Oge0s8dbSkg==2017-12-21Class II permissive change or modification of presently authorized equipment
6VLwON9FQNfcyeQ2+N9lWA==2017-12-21Class II permissive change or modification of presently authorized equipment
pT72jmcuv73VP6c3EwniUQ==2017-12-20Class II permissive change or modification of presently authorized equipment
fq3gJ1VSGZM1oFqIhD3osw==2017-12-20Class II permissive change or modification of presently authorized equipment
Atai3cTG+pW3F7oyymTyIA==2017-12-20Class II permissive change or modification of presently authorized equipment
rP4Xt3uFbGWMGj7krlrfjA==2017-12-19Class II permissive change or modification of presently authorized equipment
aLzYq3vbfosZ7AK/SRNfiQ==2017-12-19Class II permissive change or modification of presently authorized equipment
RWMlNUF69jw3S+TC3WgYjw==2017-12-19Class II permissive change or modification of presently authorized equipment
z+Xs5uHE/ZmqVetmeJQb6A==2017-11-29Class II permissive change or modification of presently authorized equipment
x6r2Gs442RwOvHdcx1kScg==2017-11-29Class II permissive change or modification of presently authorized equipment
b4FygP3BatX/Uy4VfA5k3w==2017-11-29Class II permissive change or modification of presently authorized equipment
tl8Sj9wZY2uf8iwGKHFLVw==2017-11-28Class II permissive change or modification of presently authorized equipment
g5JgLvy+41i7Gw6RED01mA==2017-11-28Class II permissive change or modification of presently authorized equipment
cvWdRQg9O8I6FMqMCcwA4w==2017-11-28Class II permissive change or modification of presently authorized equipment
MqlFKSSx9kLxs38N5fYHvw==2017-11-28Class II permissive change or modification of presently authorized equipment
JZlzJh+PoEdnHOf9fxbiAA==2017-11-28Class II permissive change or modification of presently authorized equipment
8gfD7ZYocQwTsqVnV7HSDA==2017-11-28Class II permissive change or modification of presently authorized equipment
cYv558XyoFpI/2RpfYOVow==2017-11-13Class II permissive change or modification of presently authorized equipment
412on1xtU5U9Q2qbPRTQng==2017-11-13Class II permissive change or modification of presently authorized equipment
14gjkuK9YDoJkcVpMrPdBw==2017-11-13Class II permissive change or modification of presently authorized equipment
xD2QcKMyBsZEPcQc+bkHBQ==2017-10-30Class II permissive change or modification of presently authorized equipment
cl8lQQ6/cOG66yFCYMlH9w==2017-10-30Class II permissive change or modification of presently authorized equipment
UDXrj9F8MlalvOMBTy6/9g==2017-10-30Class II permissive change or modification of presently authorized equipment
TQq4P39nBz6pkHsQ2CyFWg==2017-09-21Class II permissive change or modification of presently authorized equipment
N9vnX61rC0XbRYKnQwt3VA==2017-09-21Class II permissive change or modification of presently authorized equipment
+WE4Gqb72ht30KUp9/v0Nw==2017-09-21Class II permissive change or modification of presently authorized equipment
egetd40fL2IYU2LXa+jRLQ==2017-07-11Class II permissive change or modification of presently authorized equipment
E/YvhCBeSFLd34WuTnLeXA==2017-07-11Class II permissive change or modification of presently authorized equipment
BCJeUUWDDfb9iqtDXFbskA==2017-07-11Class II permissive change or modification of presently authorized equipment
g/DrAMCXM6lMIQjMrQAbNQ==2017-03-02Class II permissive change or modification of presently authorized equipment
cPb9P/HkBDAGdYc0QYHoIg==2017-03-02Class II permissive change or modification of presently authorized equipment
Tmbc7y4UvA/vR3aluEpOAg==2017-03-02Class II permissive change or modification of presently authorized equipment
zdiwfif8tZGfhs+m6ZVA0g==2017-01-13Class II permissive change or modification of presently authorized equipment
Qj3lAsVqSh6ElCCBMJDTPA==2017-01-13Class II permissive change or modification of presently authorized equipment
EI8+t6Qh0OkYETLK9f9DqA==2017-01-13Class II permissive change or modification of presently authorized equipment
j21YUnDpGIwUIDNCyhmwPw==2016-12-28Class II permissive change or modification of presently authorized equipment
eit/LT7cz1pGAUC4SGImVw==2016-12-28Class II permissive change or modification of presently authorized equipment
NjTfYHfdYujO7YdsiQl6eA==2016-12-28Class II permissive change or modification of presently authorized equipment
qhlpyCCuWv5aZHPAFJGM8A==2016-11-15Class II permissive change or modification of presently authorized equipment
J8UlZOwgsd6i35mVdrYiTQ==2016-11-15Class II permissive change or modification of presently authorized equipment
7UAj0QpWX3h7QCa6C2HijA==2016-11-15Class II permissive change or modification of presently authorized equipment
ullrF8rqSiyBc9/Tqo+JWQ==2016-08-29Original Equipment
lLGQRlpdDoWFxldYaquYlA==2016-08-29Original Equipment
A/8WyKAoZXTJ5Cn8ifz2dA==2016-08-29Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.00415CCC
2402-2480 MHz0.004000015CCC
2402-2480 MHz0.00415CCC, MO
2402-2480 MHz0.004000015C

Grants

TCB Grant - Application zUU9GwXzlDDHixCqmW/iNQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 05/07/2019

Application Dated: 04/30/2019
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.106  
CC MO ND 15E 5260.0  -  5320.0 0.135  
CC MO ND 15E 5500.0  -  5720.0 0.129  
CC MO 15E 5745.0  -  5825.0 0.129  

Class II Permissive Change: This change is to incorporate this Module into portable host(Brand: Lenovo, Model Number: Lenovo IdeaPad S540-15IWL GTX) and as described in this filing) and to add 1-group new antennas as described in this filing. The highest reported SAR for body, simultaneous transmission conditions are 1.54 W/kg, 0.80 W/kg, respectively.

Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application zUU9GwXzlDDHixCqmW/iNQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 05/07/2019

Application Dated: 04/30/2019
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.106  
CC MO ND 15E 5260.0  -  5320.0 0.135  
CC MO ND 15E 5500.0  -  5720.0 0.129  
CC MO 15E 5745.0  -  5825.0 0.129  

Class II Permissive Change: This change is to incorporate this Module into portable host(Brand: Lenovo, Model Number: Lenovo IdeaPad S540-15IWL GTX) and as described in this filing) and to add 1-group new antennas as described in this filing. The highest reported SAR for body, simultaneous transmission conditions are 1.54 W/kg, 0.80 W/kg, respectively.

Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application ZqkQM5+kBfpbqVbQFyGXTg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 09/21/2018

Application Dated: 09/19/2018
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  

Class II Permissive Change: Adds portable use in HP Notebook Computer, Model HSN-I21C. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.70 W/kg, respectively.

Limited Single Modular Approval. Power listed is maximum conducted. This module is restricted to indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ZqkQM5+kBfpbqVbQFyGXTg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 09/21/2018

Application Dated: 09/19/2018
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  

Class II Permissive Change: Adds portable use in HP Notebook Computer, Model HSN-I21C. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.70 W/kg, respectively.

Limited Single Modular Approval. Power listed is maximum conducted. This module is restricted to indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application zojGzQ1ViLsXqZXgrda+6Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 03/29/2018

Application Dated: 03/29/2018
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  

Class II Change: This change is to incorporate this Module into notebook plate-form (TPN-W134, TPN-W135) as described in this filing. Any configuration other than the one described will require a separate approval. The highest reported SAR for body and simultaneous transmission use conditions are 0.02 W/kg and 0.85W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 15.204 (c) and different antenna configurations.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application zojGzQ1ViLsXqZXgrda+6Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 03/29/2018

Application Dated: 03/29/2018
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  

Class II Change: This change is to incorporate this Module into notebook plate-form (TPN-W134, TPN-W135) as described in this filing. Any configuration other than the one described will require a separate approval. The highest reported SAR for body and simultaneous transmission use conditions are 0.02 W/kg and 0.85W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 15.204 (c) and different antenna configurations.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application zdiwfif8tZGfhs+m6ZVA0g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 01/13/2017

Application Dated: 01/13/2017
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n/ac/ RTL8822BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.106  
38 CC MO 15E 5260.0  -  5320.0 0.135  
38 CC MO 15E 5500.0  -  5720.0 0.129  
38 CC MO 15E 5745.0  -  5825.0 0.129  

Limited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes. (Date of Grant: 08/29/2016) Class II Permissive Change: This C2PC is to add this module to a portable host: Notebook Computer (Model: TP00080B/ Brand: Lenovo). The highest reported SAR is 0.89 W/kg.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application zdiwfif8tZGfhs+m6ZVA0g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 01/13/2017

Application Dated: 01/13/2017
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n/ac/ RTL8822BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.106  
38 CC MO 15E 5260.0  -  5320.0 0.135  
38 CC MO 15E 5500.0  -  5720.0 0.129  
38 CC MO 15E 5745.0  -  5825.0 0.129  

Limited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes. (Date of Grant: 08/29/2016) Class II Permissive Change: This C2PC is to add this module to a portable host: Notebook Computer (Model: TP00080B/ Brand: Lenovo). The highest reported SAR is 0.89 W/kg.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application Z918+/G6qhfXfsxnQKkR5g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 01/22/2019

Application Dated: 01/21/2019
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  
CC MO 15C 2412.0  -  2472.0 0.204  

Limited Modular Approval. Power listed is maximum power conducted. This device has 20 MHz and 40 MHz bandwidth modes.

Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W140. The highest reported Body and Simultaneous SAR values are 0.88 W/kg and 1.46 W/kg respectively, when integrated using the antennas indicated below:

Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901GW.0001.

AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901GX.0001.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Z918+/G6qhfXfsxnQKkR5g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 01/22/2019

Application Dated: 01/21/2019
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  
CC MO 15C 2412.0  -  2472.0 0.204  

Limited Modular Approval. Power listed is maximum power conducted. This device has 20 MHz and 40 MHz bandwidth modes.

Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W140. The highest reported Body and Simultaneous SAR values are 0.88 W/kg and 1.46 W/kg respectively, when integrated using the antennas indicated below:

Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901GW.0001.

AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901GX.0001.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application z5/N6rXWh1TEL2hCZwFo+g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 03/21/2018

Application Dated: 03/08/2018
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Digital Transmission System
Notes: RTL8822BE Combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  
CC MO 15C 2412.0  -  2472.0 0.204  

Class II Permissive Change: This change is to incorporate this Module into portable host (Brand/Model: HP/TPN-W132) and to add 2 new antennas as described in this filing. The highest reported SAR for body, and simultaneous transmission use conditions are 0.39 W/kg, 0.76 W/kg, respectively.

Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application z5/N6rXWh1TEL2hCZwFo+g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 03/21/2018

Application Dated: 03/08/2018
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Digital Transmission System
Notes: RTL8822BE Combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  
CC MO 15C 2412.0  -  2472.0 0.204  

Class II Permissive Change: This change is to incorporate this Module into portable host (Brand/Model: HP/TPN-W132) and to add 2 new antennas as described in this filing. The highest reported SAR for body, and simultaneous transmission use conditions are 0.39 W/kg, 0.76 W/kg, respectively.

Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application z+Xs5uHE/ZmqVetmeJQb6A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 11/29/2017

Application Dated: 11/29/2017
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5150.0  -  5240.0 0.106  
CC MO 15E 5260.0  -  5320.0 0.135  
CC MO 15E 5500.0  -  5720.0 0.129  
CC MO 15E 5745.0  -  5825.0 0.129  

C2PC: Integration in a new portable host (Brand name: HP / model: HSN-I3C-5).

Limited Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.

The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.756 W/kg, 1.295 W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application z+Xs5uHE/ZmqVetmeJQb6A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 11/29/2017

Application Dated: 11/29/2017
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5150.0  -  5240.0 0.106  
CC MO 15E 5260.0  -  5320.0 0.135  
CC MO 15E 5500.0  -  5720.0 0.129  
CC MO 15E 5745.0  -  5825.0 0.129  

C2PC: Integration in a new portable host (Brand name: HP / model: HSN-I3C-5).

Limited Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.

The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.756 W/kg, 1.295 W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application YpQSI1PhqgzHP053jqfcBg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 01/30/2019

Application Dated: 01/29/2019
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.106  
CC MO 15E 5260.0  -  5320.0 0.135  
CC MO 15E 5500.0  -  5720.0 0.129  
CC MO 15E 5745.0  -  5825.0 0.129  

Limited Modular Approval. Power listed is maximum power conducted. This device has 20, 40 and 80 MHz bandwidth modes.

Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W141. The highest reported Body and Simultaneous SAR values are 1.20 W/kg and 1.35 W/kg respectively, when integrated using the antennas indicated below:

Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901H2.0001 (WA-P-LB-02-598).

AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901H3.0001 (WA-P-LB-02-599).


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application YpQSI1PhqgzHP053jqfcBg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 01/30/2019

Application Dated: 01/29/2019
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.106  
CC MO 15E 5260.0  -  5320.0 0.135  
CC MO 15E 5500.0  -  5720.0 0.129  
CC MO 15E 5745.0  -  5825.0 0.129  

Limited Modular Approval. Power listed is maximum power conducted. This device has 20, 40 and 80 MHz bandwidth modes.

Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W141. The highest reported Body and Simultaneous SAR values are 1.20 W/kg and 1.35 W/kg respectively, when integrated using the antennas indicated below:

Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901H2.0001 (WA-P-LB-02-598).

AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901H3.0001 (WA-P-LB-02-599).


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application ypQcrSsF+9vFHi7u7UNCZQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 03/30/2018

Application Dated: 03/30/2018
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.106  
CC MO ND 15E 5260.0  -  5320.0 0.135  
CC MO ND 15E 5500.0  -  5700.0 0.129  
CC MO 15E 5745.0  -  5825.0 0.129  

Class II Change: This change is to incorporate this Module into notebook plate-form (TPN-W136) as described in this filing. The highest reported SAR for body, and simultaneous transmission use conditions are 0.68W/kg and 0.68 W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 15.204(c ) and different antenna configurations. This device has 20 MHz, 40MHz and 80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application ypQcrSsF+9vFHi7u7UNCZQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 03/30/2018

Application Dated: 03/30/2018
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.106  
CC MO ND 15E 5260.0  -  5320.0 0.135  
CC MO ND 15E 5500.0  -  5700.0 0.129  
CC MO 15E 5745.0  -  5825.0 0.129  

Class II Change: This change is to incorporate this Module into notebook plate-form (TPN-W136) as described in this filing. The highest reported SAR for body, and simultaneous transmission use conditions are 0.68W/kg and 0.68 W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 15.204(c ) and different antenna configurations. This device has 20 MHz, 40MHz and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application y8QSpMIAJ0BXiHQq3Ca9Uw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 04/24/2018

Application Dated: 04/23/2018
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Digital Transmission System
Notes: RTL8822BE Combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  
CC MO 15C 2412.0  -  2472.0 0.204  

Class II Permissive Change: This change is to incorporate this Module into portable host (Brand/Model: HP/HSN-W01C) and to add 2 new antennas as described in this filing. The highest reported SAR for body, and simultaneous transmission use conditions are 0.61 W/kg, 1.026 W/kg, respectively.

Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application y8QSpMIAJ0BXiHQq3Ca9Uw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 04/24/2018

Application Dated: 04/23/2018
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Digital Transmission System
Notes: RTL8822BE Combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  
CC MO 15C 2412.0  -  2472.0 0.204  

Class II Permissive Change: This change is to incorporate this Module into portable host (Brand/Model: HP/HSN-W01C) and to add 2 new antennas as described in this filing. The highest reported SAR for body, and simultaneous transmission use conditions are 0.61 W/kg, 1.026 W/kg, respectively.

Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application xXG32pyo4ZYHPrtds1lj+g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 07/03/2018

Application Dated: 07/03/2018
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  

Class II Permissive Change: This change is to incorporate this Module into portable host (Brand/Model: HP/ HSN-I13C-4) and to add 1 pair of antennas (Main and Aux) as described in this filing. The highest reported SAR for simultaneous transmission use conditions is 0.92 W/kg.

PIFA, Main Antenna HONGBO 6036B0219201 (260-27178) (Peak Gain at 2.4GHz: -0.17 dBi, at 5GHz: -0.09 dBi) PIFA, Aux Antenna HONGBO 6036B0219101 (260-27179) (Peak Gain at 2.4GHz: -2.15 dBi, at 5GHz: 2.75 dBi)

PIFA, Main Antenna ACON 6036B0198501 (ANP6Y-100180) (Peak Gain at 2.4GHz: -2.52 dBi, at 5GHz: 0.43 dBi) PIFA, Aux Antenna ACON 6036B0198601 (ANP6Y-100181) (Peak Gain at 2.4GHz: -2.05 dBi, at 5GHz: -0.60 dBi)

PIFA, Main Antenna WNC 6036B0198201 (81EAA415-GAL) (Peak Gain at 2.4GHz: -1.18 dBi, at 5GHz: -0.37 dBi) PIFA, Aux Antenna WNC 6036B0198401 (81EAA415-GAM) (Peak Gain at 2.4GHz: -2.39 dBi, at 5GHz: -2.23 dBi)

Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application xXG32pyo4ZYHPrtds1lj+g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 07/03/2018

Application Dated: 07/03/2018
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  

Class II Permissive Change: This change is to incorporate this Module into portable host (Brand/Model: HP/ HSN-I13C-4) and to add 1 pair of antennas (Main and Aux) as described in this filing. The highest reported SAR for simultaneous transmission use conditions is 0.92 W/kg.

PIFA, Main Antenna HONGBO 6036B0219201 (260-27178) (Peak Gain at 2.4GHz: -0.17 dBi, at 5GHz: -0.09 dBi) PIFA, Aux Antenna HONGBO 6036B0219101 (260-27179) (Peak Gain at 2.4GHz: -2.15 dBi, at 5GHz: 2.75 dBi)

PIFA, Main Antenna ACON 6036B0198501 (ANP6Y-100180) (Peak Gain at 2.4GHz: -2.52 dBi, at 5GHz: 0.43 dBi) PIFA, Aux Antenna ACON 6036B0198601 (ANP6Y-100181) (Peak Gain at 2.4GHz: -2.05 dBi, at 5GHz: -0.60 dBi)

PIFA, Main Antenna WNC 6036B0198201 (81EAA415-GAL) (Peak Gain at 2.4GHz: -1.18 dBi, at 5GHz: -0.37 dBi) PIFA, Aux Antenna WNC 6036B0198401 (81EAA415-GAM) (Peak Gain at 2.4GHz: -2.39 dBi, at 5GHz: -2.23 dBi)

Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application xvlHxMP2t2tcAWi9jz4Hcg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 03/30/2018

Application Dated: 03/30/2018
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  
CC MO 15C 2412.0  -  2472.0 0.204  

Class II Change: This change is to incorporate this Module into notebook plate-form (TPN-W133) as described in this filing. Any configuration other than the one described will require a separate approval. The highest reported SAR for body, and simultaneous transmission use conditions are 0.44 W/kg and 1.29 W/kg respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 15.204 (c) and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application xvlHxMP2t2tcAWi9jz4Hcg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 03/30/2018

Application Dated: 03/30/2018
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  
CC MO 15C 2412.0  -  2472.0 0.204  

Class II Change: This change is to incorporate this Module into notebook plate-form (TPN-W133) as described in this filing. Any configuration other than the one described will require a separate approval. The highest reported SAR for body, and simultaneous transmission use conditions are 0.44 W/kg and 1.29 W/kg respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 15.204 (c) and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application xSzs9j5+qQEE/iZVDBfIWg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 01/22/2019

Application Dated: 01/21/2019
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.106  
CC MO 15E 5260.0  -  5320.0 0.135  
CC MO 15E 5500.0  -  5720.0 0.129  
CC MO 15E 5745.0  -  5825.0 0.129  

Limited Modular Approval. Power listed is maximum power conducted.. This device has 20, 40 and 80 MHz bandwidth modes.

Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W140. The highest reported Body and Simultaneous SAR values are 1.25 W/kg and 1.26 W/kg respectively, when integrated using the antennas indicated below:

Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901GW.0001.

AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901GX.0001.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application xSzs9j5+qQEE/iZVDBfIWg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 01/22/2019

Application Dated: 01/21/2019
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.106  
CC MO 15E 5260.0  -  5320.0 0.135  
CC MO 15E 5500.0  -  5720.0 0.129  
CC MO 15E 5745.0  -  5825.0 0.129  

Limited Modular Approval. Power listed is maximum power conducted.. This device has 20, 40 and 80 MHz bandwidth modes.

Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W140. The highest reported Body and Simultaneous SAR values are 1.25 W/kg and 1.26 W/kg respectively, when integrated using the antennas indicated below:

Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901GW.0001.

AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901GX.0001.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application XOIy144DNAc3bTQaKkb6xQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 10/05/2018

Application Dated: 10/02/2018
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  
CC MO 15C 2412.0  -  2472.0 0.204  

Class II Permissive Change: Adds portable use in HP Notebook Computer, Model HSN-Q14C. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.71 W/kg and 0.95 W/kg, respectively.

TH Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGM00 (81EAA415.GGM), Gain 2.4G: -1.86 dBi Aux Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGM00 (81EAA415.GGM), Gain 2.4G: -1.51 dBi

Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375300 (260-23753), Gain 2.4G: -2.66 dBi Aux Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375300 (260-23753), Gain 2.4G: -2.87 dBi

Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: DQ6LB020602 (WA-P-LBLB-02-064), Gain 2.4G: -0.55 dBi Aux Antenna type: PIFA, Manufacturer: INPAQ, Part Number: DQ6LB020602 (WA-P-LBLB-02-064), Gain 2.4G: -0.95 dBi

NTH Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGJ00 (81EAA415.GGJ), Gain 2.4G: -3.04 dBi Aux Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGJ00 (81EAA415.GGJ), Gain 2.4G: -2.22 dBi

Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375400 (260-23754), Gain 2.4G: -2.51 dBi Aux Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375400 (260-23754), Gain 2.4G: -2.02 dBi

Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: DQ6LB020603 (WA-P-LBLB-02-063), Gain 2.4G: 0.85 dBi Aux Antenna type: PIFA, Manufacturer: INPAQ, Part Number: DQ6LB020603 (WA-P-LBLB-02-063), Gain 2.4G: 1.07 dBi

Limited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application XOIy144DNAc3bTQaKkb6xQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 10/05/2018

Application Dated: 10/02/2018
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  
CC MO 15C 2412.0  -  2472.0 0.204  

Class II Permissive Change: Adds portable use in HP Notebook Computer, Model HSN-Q14C. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.71 W/kg and 0.95 W/kg, respectively.

TH Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGM00 (81EAA415.GGM), Gain 2.4G: -1.86 dBi Aux Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGM00 (81EAA415.GGM), Gain 2.4G: -1.51 dBi

Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375300 (260-23753), Gain 2.4G: -2.66 dBi Aux Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375300 (260-23753), Gain 2.4G: -2.87 dBi

Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: DQ6LB020602 (WA-P-LBLB-02-064), Gain 2.4G: -0.55 dBi Aux Antenna type: PIFA, Manufacturer: INPAQ, Part Number: DQ6LB020602 (WA-P-LBLB-02-064), Gain 2.4G: -0.95 dBi

NTH Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGJ00 (81EAA415.GGJ), Gain 2.4G: -3.04 dBi Aux Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGJ00 (81EAA415.GGJ), Gain 2.4G: -2.22 dBi

Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375400 (260-23754), Gain 2.4G: -2.51 dBi Aux Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375400 (260-23754), Gain 2.4G: -2.02 dBi

Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: DQ6LB020603 (WA-P-LBLB-02-063), Gain 2.4G: 0.85 dBi Aux Antenna type: PIFA, Manufacturer: INPAQ, Part Number: DQ6LB020603 (WA-P-LBLB-02-063), Gain 2.4G: 1.07 dBi

Limited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application xD2QcKMyBsZEPcQc+bkHBQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 10/30/2017

Application Dated: 10/30/2017
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 a/b/g/n/ac RTL8822BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5150.0  -  5240.0 0.106  
38 CC MO 15E 5260.0  -  5320.0 0.135  
38 CC MO 15E 5500.0  -  5720.0 0.129  
38 CC MO 15E 5745.0  -  5825.0 0.129  

C2PC: Integration in a new portable host (Brand name: HP / model: TPN-C128). Limited Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.87 W/kg, 1.35 W/kg respectively.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application xD2QcKMyBsZEPcQc+bkHBQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 10/30/2017

Application Dated: 10/30/2017
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 a/b/g/n/ac RTL8822BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5150.0  -  5240.0 0.106  
38 CC MO 15E 5260.0  -  5320.0 0.135  
38 CC MO 15E 5500.0  -  5720.0 0.129  
38 CC MO 15E 5745.0  -  5825.0 0.129  

C2PC: Integration in a new portable host (Brand name: HP / model: TPN-C128). Limited Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.87 W/kg, 1.35 W/kg respectively.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application x6r2Gs442RwOvHdcx1kScg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 11/29/2017

Application Dated: 11/29/2017
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  
CC MO 15C 2412.0  -  2472.0 0.204  

C2PC: Integration in a new portable host (Brand name: HP / model: HSN-I3C-5).

Limited Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.

The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.441 W/kg, 0.790 W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application x6r2Gs442RwOvHdcx1kScg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 11/29/2017

Application Dated: 11/29/2017
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  
CC MO 15C 2412.0  -  2472.0 0.204  

C2PC: Integration in a new portable host (Brand name: HP / model: HSN-I3C-5).

Limited Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.

The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.441 W/kg, 0.790 W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application VjbKIbtqidVl6093kSZWHQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 02/01/2019

Application Dated: 01/30/2019
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  

Limited Modular Approval. Power listed is maximum power conducted. This device has 20 MHz and 40 MHz bandwidth modes.

Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W143. RF exposure compliance was demonstrated, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: WNC, Part Number: 025.901HL.0001.

AUX Antenna type: PIFA, Manufacturer: WNC, Part Number: 025.901HL.0001.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application VjbKIbtqidVl6093kSZWHQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 02/01/2019

Application Dated: 01/30/2019
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  

Limited Modular Approval. Power listed is maximum power conducted. This device has 20 MHz and 40 MHz bandwidth modes.

Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W143. RF exposure compliance was demonstrated, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: WNC, Part Number: 025.901HL.0001.

AUX Antenna type: PIFA, Manufacturer: WNC, Part Number: 025.901HL.0001.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application VBgrO53sNuyNY/0nCN776Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 07/04/2018

Application Dated: 07/04/2018
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.106  
CC MO 15E 5260.0  -  5320.0 0.135  
CC MO 15E 5500.0  -  5720.0 0.129  
CC MO 15E 5745.0  -  5825.0 0.129  

Power Output listed is conducted. C2PC: Integration in a new portable host (Brand name: HP / model: HSN-I17C-5) and to add a new antenna as described in this filing: Main Antenna, Type: PIFA; Brand Name: HONGBO: Parts Number: 6036B0219601 (260-27182) Peak Gain: 2.4GHz, 0.04 dBi, 5GHz, -2.05 dBi. Aux Antenna, Type: PIFA; Brand Name: HONGBO; Parts Number: 6036B0219501 (260-27183), Peak Gain: 2.4GHz, -2.38 dBi, 5GHz: -2.94 dBi.

Antennas already listed on the original grant are: Main Antenna, Type: PIFA; Brand Name: ACON: Parts Number: 6036B0199301 (ANP6Y-100182) Peak Gain: 2.4GHz: -0.99 dBi, 5GHz: 1.37 dBi Aux Antenna Type: PIFA; Brand Name: ACON: Parts Number: 6036B0197901 (ANP6Y-100183) Peak Gain: 2.4GHz: -3.96 dBi, 5GHz: 2.27 dBi

Main Antenna, Type: PIFA; Brand Name: WNC: Parts Number: 6036B0198901 (81EAA415-GAN) Peak Gain 2.4GHz: -4.62 dBi, 5GHz: -2.88 dBi Aux Antenna Type: PIFA; Brand Name: WNC: Parts Number: 6036B0199001 (81EAA415-GAP) Peak Gain 2.4GHz: -3.62 dBi, 5GHz: -3.98 dBi

Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are 0.68W/kg and 1.115W/kg respectively


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application VBgrO53sNuyNY/0nCN776Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 07/04/2018

Application Dated: 07/04/2018
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.106  
CC MO 15E 5260.0  -  5320.0 0.135  
CC MO 15E 5500.0  -  5720.0 0.129  
CC MO 15E 5745.0  -  5825.0 0.129  

Power Output listed is conducted. C2PC: Integration in a new portable host (Brand name: HP / model: HSN-I17C-5) and to add a new antenna as described in this filing: Main Antenna, Type: PIFA; Brand Name: HONGBO: Parts Number: 6036B0219601 (260-27182) Peak Gain: 2.4GHz, 0.04 dBi, 5GHz, -2.05 dBi. Aux Antenna, Type: PIFA; Brand Name: HONGBO; Parts Number: 6036B0219501 (260-27183), Peak Gain: 2.4GHz, -2.38 dBi, 5GHz: -2.94 dBi.

Antennas already listed on the original grant are: Main Antenna, Type: PIFA; Brand Name: ACON: Parts Number: 6036B0199301 (ANP6Y-100182) Peak Gain: 2.4GHz: -0.99 dBi, 5GHz: 1.37 dBi Aux Antenna Type: PIFA; Brand Name: ACON: Parts Number: 6036B0197901 (ANP6Y-100183) Peak Gain: 2.4GHz: -3.96 dBi, 5GHz: 2.27 dBi

Main Antenna, Type: PIFA; Brand Name: WNC: Parts Number: 6036B0198901 (81EAA415-GAN) Peak Gain 2.4GHz: -4.62 dBi, 5GHz: -2.88 dBi Aux Antenna Type: PIFA; Brand Name: WNC: Parts Number: 6036B0199001 (81EAA415-GAP) Peak Gain 2.4GHz: -3.62 dBi, 5GHz: -3.98 dBi

Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are 0.68W/kg and 1.115W/kg respectively


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application v8RGXGKc1axZEezxKksPpw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 01/03/2019

Application Dated: 01/02/2019
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  

Limited Modular Approval. Power listed is maximum power conducted.

Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: HSN-Q17C-4. Compliance is dependent upon the use of the antennas below:

Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGQ00 (81EAA415.GGQ), Gain : -1.79 dBi.

Aux Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGQ00(81EAA415.GGQ), Gain: -0.77 dBi.

Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375000(260-23750), Gain: -0.85 dBi.

Aux Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375000 (260-23750), Gain: -2.46 dBi.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application v8RGXGKc1axZEezxKksPpw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 01/03/2019

Application Dated: 01/02/2019
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  

Limited Modular Approval. Power listed is maximum power conducted.

Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: HSN-Q17C-4. Compliance is dependent upon the use of the antennas below:

Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGQ00 (81EAA415.GGQ), Gain : -1.79 dBi.

Aux Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGQ00(81EAA415.GGQ), Gain: -0.77 dBi.

Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375000(260-23750), Gain: -0.85 dBi.

Aux Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375000 (260-23750), Gain: -2.46 dBi.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application ullrF8rqSiyBc9/Tqo+JWQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 08/29/2016

Application Dated: 08/26/2016
Realtek Semiconductor Corp.
No. 2
Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  

Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ullrF8rqSiyBc9/Tqo+JWQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Realtek Semiconductor Corp.
No. 2 Innovation Road II, Hsinchu Science Park
Hsinchu, 300
Taiwan
  Date of Grant: 08/29/2016

Application Dated: 08/26/2016
 
Attention: Dana Liaw , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TX2-RTL8822BE
Name of Grantee:  Realtek Semiconductor Corp.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11a/b/g/n/ac RTL8822BE Combo module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  

Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: