FCC ID TYOJN5139M3
IEEE 802.15.4 Wireless Microcontroller
by NXP Laboratories UK Ltd
Grantee Code: TYO Product Code: JN5139M3
Latest application date: 2009-03-29
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2400-2483.5 MHz | Class II permissive change or modification of presently authorized equipment | 2009-03-29 |
| 2400-2483.5 MHz | Original Equipment | 2007-04-19 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Antenna Data | Users Manual | 2009-03-29 | PDF 821.4 KB |
| Datasheet | Users Manual | 2009-03-29 | PDF 273.9 KB |
| Manual | Users Manual | 2009-03-29 | PDF 273.9 KB |
| manual | Users Manual | 2009-03-29 | PDF 904.8 KB |
| User Manual | Users Manual | 2007-04-19 | PDF 254.4 KB |
| module can removed | Internal Photos | 2009-03-29 | PDF 434.7 KB |
| Can Removed | Internal Photos | 2007-04-19 | PDF 180.4 KB |
| module photos | External Photos | 2009-03-29 | PDF 794.5 KB |
| External Front | External Photos | 2007-04-19 | PDF 437.4 KB |
| External Rear | External Photos | 2007-04-19 | PDF 484 KB |
| label location | ID Label/Location Info | 2009-03-29 | PDF 373.1 KB |
| Label Infomation | ID Label/Location Info | 2007-04-19 | PDF 167.5 KB |
| block diagram | Block Diagram | 2009-03-29 | PDF 32.9 KB |
| operational description | Operational Description | 2009-03-29 | PDF 32.9 KB |
| Block Diagram | Block Diagram | 2007-04-19 | PDF 32.3 KB |
| Operational Description | Operational Description | 2007-04-19 | PDF 32.3 KB |
| schematics | Schematics | 2009-03-29 | PDF 108.4 KB |
| Schematics | Schematics | 2007-04-19 | PDF 112.3 KB |
| Test Setup | Test Setup Photos | 2007-04-19 | PDF 18.9 KB |
| report | Test Report | 2009-03-29 | PDF 1.4 MB |
| Test Report | Test Report | 2007-04-19 | PDF 1.9 MB |
| Drug Decleration | Attestation Statements | 2009-03-29 | PDF 54.2 KB |
| Drug Declaration | Attestation Statements | 2007-04-19 | PDF 20.2 KB |
| module types | Cover Letter(s) | 2009-03-29 | PDF 59.8 KB |
| permissive change request | Cover Letter(s) | 2009-03-29 | PDF 57.1 KB |
| Antenna 1 of 9 | Cover Letter(s) | 2007-04-19 | PDF 113.2 KB |
| Antenna 2 of 9 | Cover Letter(s) | 2007-04-19 | PDF 127.2 KB |
| Antenna 3 of 9 | Cover Letter(s) | 2007-04-19 | PDF 352.9 KB |
| Antenna 4 of 9 | Cover Letter(s) | 2007-04-19 | PDF 252.9 KB |
| Antenna 5 of 9 | Cover Letter(s) | 2007-04-19 | PDF 368.7 KB |
| Antenna 6 of 9 | Cover Letter(s) | 2007-04-19 | PDF 249.4 KB |
| Antenna 7 of 9 | Cover Letter(s) | 2007-04-19 | PDF 463.9 KB |
| Antenna 8 of 9 | Cover Letter(s) | 2007-04-19 | PDF 189.1 KB |
| Antenna 9 of 9 | Cover Letter(s) | 2007-04-19 | PDF 480.5 KB |
| Antenna Table | Cover Letter(s) | 2007-04-19 | PDF 32.4 KB |
| bom | Parts List/Tune Up Info | 2009-03-29 | PDF 39 KB |
| MPE Calculation | RF Exposure Info | 2007-04-19 | PDF 17 KB |
| Parts List | Parts List/Tune Up Info | 2007-04-19 | PDF 9.9 KB |
Application Information
| Application ID | Ym61+pVyvlc+OAPnDzcnOA== |
|---|---|
| Final Action Date | 2009-03-29 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0014596860 |
| Model | JN5139M3 |
| Frequency Range | 2400-2483.5 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | IEEE 802.15.4 Wireless Microcontroller |
| Responsible Party | Conrad Farlow, conrad.farlow@nxp.com  , +44 114 281 2655 |
| Test Firm | Roger Ray, R.N. Electronics Ltd., roger@RNelectronics.com  , 44-1277-352219 |
| TCB Email | peter.green@tracglobal.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. This Grant covers the following module variants: JN5139-T01-C13, JN5139-JØ1-C13, JN5139-001-MØ3 and JN5139-Z01-MØ3 |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Ym61+pVyvlc+OAPnDzcnOA== | 2009-03-29 | Class II permissive change or modification of presently authorized equipment |
| 2ZyXrzySCLg+/i4IJMlXOw== | 2007-04-19 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2400-2483.5 MHz | 0.0030000 | 15C |
Grants
TCB Grant - Application Ym61+pVyvlc+OAPnDzcnOA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TRaC Global Ltd 100 Frobisher Business Park Leigh Sinton Road, Malvern, Worcestershire Malvern, WR14 1BX United Kingdom |
Date of Grant: 03/29/2009 Application Dated: 03/29/2009 |
| NXP Laboratories UK Ltd |
| Furnival St |
| Sheffield, S1 4QT United Kingdom |
| Attention: Conrad Farlow |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TYOJN5139M3 |
| Name of Grantee: | NXP Laboratories UK Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.15.4 Wireless Microcontroller |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2400.0 - 2483.5 | 0.003 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. This Grant covers the following module variants: JN5139-T01-C13, JN5139-JØ1-C13, JN5139-001-MØ3 and JN5139-Z01-MØ3 |
EAS Grant - Application Ym61+pVyvlc+OAPnDzcnOA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
NXP Laboratories UK Ltd Furnival St Sheffield, S1 4QT United Kingdom |
Date of Grant: 03/29/2009 Application Dated: 03/29/2009 |
| Attention: Conrad Farlow |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TYOJN5139M3 |
| Name of Grantee: | NXP Laboratories UK Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.15.4 Wireless Microcontroller |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2400.0 - 2483.5 | 0.003 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. This Grant covers the following module variants: JN5139-T01-C13, JN5139-JØ1-C13, JN5139-001-MØ3 and JN5139-Z01-MØ3 |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| TRaC Global Ltd 100 Frobisher Business Park Leigh Sinton Road, Malvern, Worcestershire Malvern, WR14 1BX United Kingdom | Date of Grant: 04/19/2007 Application Dated: 04/19/2007 |
| NXP Laboratories UK Ltd |
| Furnival St |
| Sheffield, S1 4QT United Kingdom |
| Attention: Conrad Farlow |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TYOJN5139M3 |
| Name of Grantee: | NXP Laboratories UK Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | JN5139-000-M03 IEEE802.15.4 Wireless Transmitter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2400.0 - 2483.5 | 0.003 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
EAS Grant - Application 2ZyXrzySCLg+/i4IJMlXOw==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| NXP Laboratories UK Ltd Furnival St Sheffield, S1 4QT United Kingdom | Date of Grant: 04/19/2007 Application Dated: 04/19/2007 |
| Attention: Conrad Farlow |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TYOJN5139M3 |
| Name of Grantee: | NXP Laboratories UK Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | JN5139-000-M03 IEEE802.15.4 Wireless Transmitter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2400.0 - 2483.5 | 0.003 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID.
|
| Mail To: |
| EA238893 |