1. FCC ID
  2. TYO
  3. TYOJN5139M4

FCC ID TYOJN5139M4

IEEE 802.15.4 High Power Wireless Microcontroller

by NXP Laboratories UK Ltd

Grantee Code: TYO   Product Code: JN5139M4
Latest application date: 2009-04-09

FCC ID Device Details

FCC IDTYOJN5139M4
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeTYO
Product CodeJN5139M4
Applicant BusinessNXP Laboratories UK Ltd 🇬🇧
Related Domains nxp.com
Equipment ClassIEEE 802.15.4 High Power Wireless Microcontroller
Test FirmR.N. Electronics Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2400-2483.5 MHzClass II permissive change or modification of presently authorized equipment2009-04-09
2400-2483.5 MHzClass II permissive change or modification of presently authorized equipment2008-04-25
2400-2483.5 MHzOriginal Equipment2007-04-19

Exhibits

DocumentTypeAvailableFile
Antenna Info 1Users Manual2009-04-09PDF 307.3 KB
Antenna Info 10Users Manual2009-04-09PDF 821.4 KB
Antenna Info 11Users Manual2009-04-09PDF 303.8 KB
Antenna Info 12Users Manual2009-04-09PDF 477.7 KB
Antenna Info 13Users Manual2009-04-09PDF 570.5 KB
Antenna Info 14Users Manual2009-04-09PDF 579.2 KB
Antenna Info 15Users Manual2009-04-09PDF 480.5 KB
Antenna Info 16Users Manual2009-04-09PDF 113.2 KB
Antenna Info 17Users Manual2009-04-09PDF 264.2 KB
Antenna Info 18Users Manual2009-04-09PDF 127.2 KB
Antenna Info 19Users Manual2009-04-09PDF 287.6 KB
Antenna Info 2Users Manual2009-04-09PDF 435.8 KB
Antenna Info 20Users Manual2009-04-09PDF 249.4 KB
Antenna Info 21Users Manual2009-04-09PDF 506.7 KB
Antenna Info 22Users Manual2009-04-09PDF 228.6 KB
Antenna Info 23Users Manual2009-04-09PDF 462.8 KB
Antenna Info 24Users Manual2009-04-09PDF 73.4 KB
Antenna Info 25Users Manual2009-04-09PDF 464.5 KB
Antenna Info 26Users Manual2009-04-09PDF 560.4 KB
Antenna Info 27Users Manual2009-04-09PDF 206.4 KB
Antenna Info 28Users Manual2009-04-09PDF 215.1 KB
Antenna Info 29Users Manual2009-04-09PDF 408.5 KB
Antenna Info 3Users Manual2009-04-09PDF 435 KB
Antenna Info 30Users Manual2009-04-09PDF 463.9 KB
Antenna Info 31Users Manual2009-04-09PDF 252.5 KB
Antenna Info 32Users Manual2009-04-09PDF 252.9 KB
Antenna Info 33Users Manual2009-04-09PDF 604.5 KB
Antenna Info 34Users Manual2009-04-09PDF 352.9 KB
Antenna Info 4Users Manual2009-04-09PDF 294.4 KB
Antenna Info 5Users Manual2009-04-09PDF 293.1 KB
Antenna Info 6Users Manual2009-04-09PDF 296.5 KB
Antenna Info 7Users Manual2009-04-09PDF 297.8 KB
Antenna Info 8Users Manual2009-04-09PDF 521.3 KB
Antenna Info 9Users Manual2009-04-09PDF 820.4 KB
manualUsers Manual2009-04-09PDF 904.8 KB
Antenna Info 1Users Manual2008-04-25PDF 113.2 KB
Antenna Info 2Users Manual2008-04-25PDF 127.2 KB
Antenna Info 3Users Manual2008-04-25PDF 352.9 KB
Antenna Info 4Users Manual2008-04-25PDF 252.9 KB
Antenna Info 5Users Manual2008-04-25PDF 368.7 KB
Antenna Info 6Users Manual2008-04-25PDF 249.4 KB
Antenna Info 7Users Manual2008-04-25PDF 463.9 KB
Antenna Info 8Users Manual2008-04-25PDF 189.1 KB
Antenna Info 9Users Manual2008-04-25PDF 480.5 KB
ManualUsers Manual2008-04-25PDF 3.2 MB
User ManualUsers Manual2007-04-19PDF 254.4 KB
module can removedInternal Photos2009-04-09PDF 1 MB
Internal PhotosInternal Photos2008-04-25PDF 52.7 KB
Can RemovedInternal Photos2007-04-19PDF 603.8 KB
front of moduleExternal Photos2009-04-09PDF 780.4 KB
rear of moduleExternal Photos2009-04-09PDF 359.3 KB
Antenna PhotoExternal Photos2008-04-25PDF 96.4 KB
External PhotosExternal Photos2008-04-25PDF 217.5 KB
Bottom PhotoExternal Photos2007-04-19PDF 372.2 KB
Top PhotoExternal Photos2007-04-19PDF 342.9 KB
label infoID Label/Location Info2009-04-09PDF 381.2 KB
Label and LocationID Label/Location Info2008-04-25PDF 91 KB
Label LocationID Label/Location Info2007-04-19PDF 62.8 KB
Block DiagramBlock Diagram2009-04-09PDF 32.9 KB
Operational descriptionOperational Description2009-04-09PDF 32.9 KB
Block DiagramBlock Diagram2008-04-25PDF 32.3 KB
Operational DescriptionOperational Description2008-04-25PDF 32.3 KB
schematicsSchematics2009-04-09PDF 146.1 KB
SchematicsSchematics2008-04-25PDF 146.1 KB
schematicsSchematics2007-04-19PDF 152.7 KB
Test SetupTest Setup Photos2008-04-25PDF 418.3 KB
Radiated EmissionsTest Setup Photos2007-04-19PDF 365 KB
reportTest Report2009-04-09PDF 1.2 MB
Test report 1 of 2Test Report2008-04-25PDF 1.9 MB
Test report 2 of 2Test Report2008-04-25PDF 143.1 KB
Test ReportTest Report2007-04-19PDF 759.2 KB
Drug DeclarationAttestation Statements2009-04-09PDF 54.5 KB
Drug DeclarationAttestation Statements2008-04-25PDF 22.3 KB
Drug DeclarationAttestation Statements2007-04-19PDF 20.2 KB
Module TypesCover Letter(s)2009-04-09PDF 59.7 KB
Permissive Change RequestCover Letter(s)2009-04-09PDF 57.1 KB
Modular Approval LetterCover Letter(s)2008-04-25PDF 13.8 KB
Permissive Change LetterCover Letter(s)2008-04-25PDF 13.7 KB
Antenna 1 of 9Cover Letter(s)2007-04-19PDF 113.2 KB
Antenna 2 of 9Cover Letter(s)2007-04-19PDF 127.2 KB
Antenna 3 of 9Cover Letter(s)2007-04-19PDF 352.9 KB
Antenna 4 of 9Cover Letter(s)2007-04-19PDF 252.9 KB
Antenna 5 of 9Cover Letter(s)2007-04-19PDF 368.7 KB
Antenna 6 of 9Cover Letter(s)2007-04-19PDF 249.4 KB
Antenna 7 of 9Cover Letter(s)2007-04-19PDF 463.9 KB
Antenna 8 of 9Cover Letter(s)2007-04-19PDF 189.1 KB
Antenna 9 of 9Cover Letter(s)2007-04-19PDF 480.5 KB
exposure infoRF Exposure Info2009-04-09PDF 69.1 KB
parts listParts List/Tune Up Info2009-04-09PDF 42.6 KB
BOMParts List/Tune Up Info2008-04-25PDF 12.8 KB
MPE CalculationRF Exposure Info2008-04-25PDF 17.2 KB
MPE InfomationRF Exposure Info2007-04-19PDF 17.2 KB
Parts ListParts List/Tune Up Info2007-04-19PDF 11.1 KB

Application Information

Application IDkfRBxxfkSdD0+d55NCMugA==
Final Action Date2009-04-09
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0014596860
ModelJN5139M4
Frequency Range2400-2483.5 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionIEEE 802.15.4 High Power Wireless Microcontroller
Responsible PartyConrad Farlow, conrad.farlow@nxp.com , +44 114 281 2655
Test FirmRoger Ray, R.N. Electronics Ltd., roger@RNelectronics.com , 44-1277-352219
TCB EmailPeter.Green@tracglobal.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. This Grant covers the following module variants: JN5139-T01-C14, JN5139-JØ1-C14, JN5139-001-MØ4 and JN5139-Z01-MØ4

Applications

Application IDDatePurpose
kfRBxxfkSdD0+d55NCMugA==2009-04-09Class II permissive change or modification of presently authorized equipment
6xZ3HFV8vbt9UK8/WsierQ==2008-04-25Class II permissive change or modification of presently authorized equipment
d38KqN+Ef0gn/shNz+n8XQ==2007-04-19Original Equipment

Equipment Authorization

FrequencyOutputRules
2400-2483.5 MHz0.100000015C

Grants

TCB Grant - Application kfRBxxfkSdD0+d55NCMugA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TRaC Global Ltd
100 Frobisher Business Park Leigh Sinton Road, Malvern, Worcestershire
Malvern, WR14 1BX
United Kingdom 		Date of Grant: 04/09/2009

Application Dated: 04/09/2009
NXP Laboratories UK Ltd
Furnival St
Sheffield, S1 4QT
United Kingdom
 
Attention: Conrad Farlow

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TYOJN5139M4
Name of Grantee:  NXP Laboratories UK Ltd
Equipment Class: Digital Transmission System
Notes: IEEE 802.15.4 High Power Wireless Microcontroller
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2400.0  -  2483.5 0.1  

Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. This Grant covers the following module variants: JN5139-T01-C14, JN5139-JØ1-C14, JN5139-001-MØ4 and JN5139-Z01-MØ4

EAS Grant - Application kfRBxxfkSdD0+d55NCMugA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

NXP Laboratories UK Ltd
Furnival St
Sheffield, S1 4QT
United Kingdom 		  Date of Grant: 04/09/2009

Application Dated: 04/09/2009
 
Attention: Conrad Farlow

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TYOJN5139M4
Name of Grantee:  NXP Laboratories UK Ltd
Equipment Class: Digital Transmission System
Notes: IEEE 802.15.4 High Power Wireless Microcontroller
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2400.0  -  2483.5 0.1  

Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. This Grant covers the following module variants: JN5139-T01-C14, JN5139-JØ1-C14, JN5139-001-MØ4 and JN5139-Z01-MØ4



TCB Grant - Application d38KqN+Ef0gn/shNz+n8XQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION 		TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TRaC Global Ltd
100 Frobisher Business Park Leigh Sinton Road, Malvern, Worcestershire
Malvern, WR14 1BX
United Kingdom 		Date of Grant: 04/19/2007

Application Dated: 04/19/2007
NXP Laboratories UK Ltd
Furnival St
Sheffield, S1 4QT
United Kingdom
 
Attention: Conrad Farlow

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TYOJN5139M4
Name of Grantee:  NXP Laboratories UK Ltd
Equipment Class: Digital Transmission System
Notes: JN5139-000-M04 IEEE802.15.4 Wireless Transmitter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2400.0  -  2483.5 0.1  

Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID.


EAS Grant - Application d38KqN+Ef0gn/shNz+n8XQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION 		COPY
Certification

NXP Laboratories UK Ltd
Furnival St
Sheffield, S1 4QT
United Kingdom 		  Date of Grant: 04/19/2007

Application Dated: 04/19/2007
 
Attention: Conrad Farlow

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TYOJN5139M4
Name of Grantee:  NXP Laboratories UK Ltd
Equipment Class: Digital Transmission System
Notes: JN5139-000-M04 IEEE802.15.4 Wireless Transmitter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2400.0  -  2483.5 0.1  

Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID.



Mail To:


EA195482

TCB Grant - Application 6xZ3HFV8vbt9UK8/WsierQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TRaC Global Ltd
100 Frobisher Business Park Leigh Sinton Road, Malvern, Worcestershire
Malvern, WR14 1BX
United Kingdom 		Date of Grant: 04/25/2008

Application Dated: 04/25/2008
NXP Laboratories UK Ltd
Furnival St
Sheffield, S1 4QT
United Kingdom
 
Attention: Conrad Farlow

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TYOJN5139M4
Name of Grantee:  NXP Laboratories UK Ltd
Equipment Class: Digital Transmission System
Notes: JN5139-000-M04 Wireless Microcontroller
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2400.0  -  2483.5 0.1  

Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. This Grant covers the following module variants: JN5139-Z01-M04, JN5139-001-M04.

Single Modular

EAS Grant - Application 6xZ3HFV8vbt9UK8/WsierQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

NXP Laboratories UK Ltd
Furnival St
Sheffield, S1 4QT
United Kingdom 		  Date of Grant: 04/25/2008

Application Dated: 04/25/2008
 
Attention: Conrad Farlow

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  TYOJN5139M4
Name of Grantee:  NXP Laboratories UK Ltd
Equipment Class: Digital Transmission System
Notes: JN5139-000-M04 Wireless Microcontroller
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2400.0  -  2483.5 0.1  

Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. This Grant covers the following module variants: JN5139-Z01-M04, JN5139-001-M04.

Single Modular



Mail To: