FCC ID TYOJN5148M4
IEEE 802.15.4 Wireless Microcontroller JN5148-T01-M04
by NXP Laboratories UK Ltd
Grantee Code: TYO Product Code: JN5148M4
Latest application date: 2011-06-14
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2400-2483.5 MHz | Class II permissive change or modification of presently authorized equipment | 2011-06-14 |
| 2400-2483.5 MHz | Original Equipment | 2009-07-27 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Antenna 1 of 36 | Users Manual | 2009-07-27 | PDF 172 KB |
| Antenna 10 of 36 | Users Manual | 2009-07-27 | PDF 521.3 KB |
| Antenna 11 of 36 | Users Manual | 2009-07-27 | PDF 820.4 KB |
| Antenna 12 of 36 | Users Manual | 2009-07-27 | PDF 821.4 KB |
| Antenna 13 of 36 | Users Manual | 2009-07-27 | PDF 303.8 KB |
| Antenna 14 of 36 | Users Manual | 2009-07-27 | PDF 477.7 KB |
| Antenna 15 of 36 | Users Manual | 2009-07-27 | PDF 570.5 KB |
| Antenna 16 of 36 | Users Manual | 2009-07-27 | PDF 579.2 KB |
| Antenna 17 of 36 | Users Manual | 2009-07-27 | PDF 480.5 KB |
| Antenna 18 of 36 | Users Manual | 2009-07-27 | PDF 113.2 KB |
| Antenna 19 of 36 | Users Manual | 2009-07-27 | PDF 264.2 KB |
| Antenna 2 of 36 | Users Manual | 2009-07-27 | PDF 300.7 KB |
| Antenna 20 of 36 | Users Manual | 2009-07-27 | PDF 127.2 KB |
| Antenna 21 of 36 | Users Manual | 2009-07-27 | PDF 287.6 KB |
| Antenna 22 of 36 | Users Manual | 2009-07-27 | PDF 249.4 KB |
| Antenna 23 of 36 | Users Manual | 2009-07-27 | PDF 506.7 KB |
| Antenna 24 of 36 | Users Manual | 2009-07-27 | PDF 228.6 KB |
| Antenna 25 of 36 | Users Manual | 2009-07-27 | PDF 462.8 KB |
| Antenna 26 of 36 | Users Manual | 2009-07-27 | PDF 73.4 KB |
| Antenna 27 of 36 | Users Manual | 2009-07-27 | PDF 464.5 KB |
| Antenna 28 of 36 | Users Manual | 2009-07-27 | PDF 560.4 KB |
| Antenna 29 of 36 | Users Manual | 2009-07-27 | PDF 206.4 KB |
| Antenna 3 of 36 | Users Manual | 2009-07-27 | PDF 307.3 KB |
| Antenna 30 of 36 | Users Manual | 2009-07-27 | PDF 215.1 KB |
| Antenna 31 of 36 | Users Manual | 2009-07-27 | PDF 408.5 KB |
| Antenna 32 of 36 | Users Manual | 2009-07-27 | PDF 463.9 KB |
| Antenna 33 of 36 | Users Manual | 2009-07-27 | PDF 252.5 KB |
| Antenna 34 of 36 | Users Manual | 2009-07-27 | PDF 252.9 KB |
| Antenna 35 of 36 | Users Manual | 2009-07-27 | PDF 604.5 KB |
| Antenna 36 of 36 | Users Manual | 2009-07-27 | PDF 352.9 KB |
| Antenna 4 of 36 | Users Manual | 2009-07-27 | PDF 435.8 KB |
| Antenna 5 of 36 | Users Manual | 2009-07-27 | PDF 435 KB |
| Antenna 6 of 36 | Users Manual | 2009-07-27 | PDF 294.4 KB |
| Antenna 7 of 36 | Users Manual | 2009-07-27 | PDF 293.1 KB |
| Antenna 8 of 36 | Users Manual | 2009-07-27 | PDF 296.5 KB |
| Antenna 9 of 36 | Users Manual | 2009-07-27 | PDF 297.8 KB |
| Antenna Table | Users Manual | 2009-07-27 | PDF 42.4 KB |
| chip manual | Users Manual | 2009-07-27 | PDF 911 KB |
| user manual | Users Manual | 2009-07-27 | PDF 480.7 KB |
| Internal Photos | Internal Photos | 2009-07-27 | PDF 108.9 KB |
| external photos | External Photos | 2009-07-27 | PDF 400.8 KB |
| label information | ID Label/Location Info | 2009-07-27 | PDF 56.5 KB |
| Block Diagram | Block Diagram | 2009-07-27 | PDF 50.3 KB |
| Operational Description | Operational Description | 2009-07-27 | PDF 50.3 KB |
| schematics | Schematics | 2009-07-27 | PDF 147.6 KB |
| setup photos | Test Setup Photos | 2009-07-27 | PDF 32.4 KB |
| Report | Test Report | 2011-06-14 | PDF 1.3 MB |
| report | Test Report | 2009-07-27 | PDF 794.4 KB |
| Drug Declaration | Attestation Statements | 2009-07-27 | PDF 54.2 KB |
| Permissive Change | Cover Letter(s) | 2011-06-14 | PDF 368.4 KB |
| Modular approval | Cover Letter(s) | 2009-07-27 | PDF 60.1 KB |
| BOM | Parts List/Tune Up Info | 2011-06-14 | PDF 29.7 KB |
| MPE Calculation | RF Exposure Info | 2009-07-27 | PDF 69.4 KB |
| parts list | Parts List/Tune Up Info | 2009-07-27 | PDF 7.2 KB |
Application Information
| Application ID | LqBZL6ysFR/0P5VS0C63Og== |
|---|---|
| Final Action Date | 2011-06-14 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0014596860 |
| Model | JN5148M4 |
| Frequency Range | 2400-2483.5 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | IEEE 802.15.4 Wireless Microcontroller JN5148-T01-M04 |
| Responsible Party | Conrad Farlow, conrad.farlow@nxp.com  , +44 114 281 2655 |
| Test Firm | Roger Ray, R.N. Electronics Ltd., roger@RNelectronics.com  , 44-1277-352219 |
| TCB Email | peter.green@tracglobal.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| LqBZL6ysFR/0P5VS0C63Og== | 2011-06-14 | Class II permissive change or modification of presently authorized equipment |
| ukVUGiHkUQTJLItl+E5ieA== | 2009-07-27 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2400-2483.5 MHz | 0.0800000 | 15C |
Grants
TCB Grant - Application ukVUGiHkUQTJLItl+E5ieA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TRaC Global Ltd 100 Frobisher Business Park Leigh Sinton Road, Malvern, Worcestershire Malvern, WR14 1BX United Kingdom |
Date of Grant: 07/27/2009 Application Dated: 07/27/2009 |
| NXP Laboratories UK Ltd |
| Furnival St |
| Sheffield, S1 4QT United Kingdom |
| Attention: Conrad Farlow |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TYOJN5148M4 |
| Name of Grantee: | NXP Laboratories UK Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.15.4 High Power Wireless Microcontroller |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2400.0 - 2483.5 | 0.08 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
EAS Grant - Application ukVUGiHkUQTJLItl+E5ieA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
NXP Laboratories UK Ltd Furnival St Sheffield, S1 4QT United Kingdom |
Date of Grant: 07/27/2009 Application Dated: 07/27/2009 |
| Attention: Conrad Farlow |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TYOJN5148M4 |
| Name of Grantee: | NXP Laboratories UK Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.15.4 High Power Wireless Microcontroller |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2400.0 - 2483.5 | 0.08 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TRaC Global Ltd 100 Frobisher Business Park Leigh Sinton Road, Malvern, Worcestershire Malvern, WR14 1BX United Kingdom |
Date of Grant: 06/14/2011 Application Dated: 06/14/2011 |
| NXP Laboratories UK Ltd |
| Furnival St |
| Sheffield, S1 4QT United Kingdom |
| Attention: Conrad Farlow |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TYOJN5148M4 |
| Name of Grantee: | NXP Laboratories UK Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.15.4 Wireless Microcontroller JN5148-T01-M04 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2400.0 - 2483.5 | 0.08 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
EAS Grant - Application LqBZL6ysFR/0P5VS0C63Og==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
NXP Laboratories UK Ltd Furnival St Sheffield, S1 4QT United Kingdom |
Date of Grant: 06/14/2011 Application Dated: 06/14/2011 |
| Attention: Conrad Farlow |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | TYOJN5148M4 |
| Name of Grantee: | NXP Laboratories UK Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.15.4 Wireless Microcontroller JN5148-T01-M04 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2400.0 - 2483.5 | 0.08 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
| Mail To: |