FCC ID U2M-CAP7250AG

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany

Date of Grant: 09/18/2014 Application Dated: 09/18/2014

Senao Networks, Inc.

3F, No. 529, Chung Cheng Rd., Hsintien,

Taipei, Taiwan

Attention: Patricia Li

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	U2M-CAP7250AG
Name of Grantee:	Senao Networks, Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Access Point

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
39 CC MO	15E	5180.0  -  5240.0	0.297
39 CC MO	15E	5190.0  -  5230.0	0.56
39 CC MO	15E	5745.0  -  5825.0	0.598
39 CC MO	15E	5755.0  -  5795.0	0.681
39 CC MO	15E	5210.0  -  5210.0	0.078
39 CC MO	15E	5775.0  -  5775.0	0.054

Output Power listed is the maximum combined conducted output power as indicated in the filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all persons. End-users must be provided transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 5190 to 5230 MHz and 5755 to 5795 MHz respectively; and in 802.11ac (80 MHz), the operating frequency segment limited to 5210 MHz and 5775 MHz respectively.

39:	This sub-band complies with the new rules for U-NII devices adopted under Docket No. 13-49. This device may not be sold or marketed after June 1, 2016, unless all grant-listed U-NII sub-bands demonstrate compliance with Docket No. 13-49.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Senao Networks, Inc. 3F, No. 529, Chung Cheng Rd., Hsintien, Taipei, Taiwan

Date of Grant: 09/18/2014 Application Dated: 09/18/2014

Attention: Patricia Li

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	U2M-CAP7250AG
Name of Grantee:	Senao Networks, Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Access Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
39 CC MO	15E	5180.0  -  5240.0	0.297
39 CC MO	15E	5190.0  -  5230.0	0.56
39 CC MO	15E	5745.0  -  5825.0	0.598
39 CC MO	15E	5755.0  -  5795.0	0.681
39 CC MO	15E	5210.0  -  5210.0	0.078
39 CC MO	15E	5775.0  -  5775.0	0.054

Output Power listed is the maximum combined conducted output power as indicated in the filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all persons. End-users must be provided transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 5190 to 5230 MHz and 5755 to 5795 MHz respectively; and in 802.11ac (80 MHz), the operating frequency segment limited to 5210 MHz and 5775 MHz respectively.

39:	This sub-band complies with the new rules for U-NII devices adopted under Docket No. 13-49. This device may not be sold or marketed after June 1, 2016, unless all grant-listed U-NII sub-bands demonstrate compliance with Docket No. 13-49.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application DrRiSsW4/HROZnmm34RH9Q==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany

Date of Grant: 09/18/2014 Application Dated: 09/18/2014

Senao Networks, Inc.

3F, No. 529, Chung Cheng Rd., Hsintien,

Taipei, Taiwan

Attention: Patricia Li

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	U2M-CAP7250AG
Name of Grantee:	Senao Networks, Inc.
Equipment Class:	Digital Transmission System
Notes:	Access Point

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.871
CC MO	15C	2422.0  -  2452.0	0.444

Output Power listed is the maximum combined conducted peak output power as indicated in the filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all persons. End-users must be provided transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Senao Networks, Inc. 3F, No. 529, Chung Cheng Rd., Hsintien, Taipei, Taiwan

Date of Grant: 09/18/2014 Application Dated: 09/18/2014

Attention: Patricia Li

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	U2M-CAP7250AG
Name of Grantee:	Senao Networks, Inc.
Equipment Class:	Digital Transmission System
Notes:	Access Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.871
CC MO	15C	2422.0  -  2452.0	0.444

Output Power listed is the maximum combined conducted peak output power as indicated in the filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all persons. End-users must be provided transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: