FCC ID U2M-EUB600DM

WiFi Module

by Senao Networks, Inc.

Grantee Code: U2M   Product Code: EUB600DM
Latest application date: 2014-01-08

FCC ID Device Details

FCC IDU2M-EUB600DM
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeU2M
Product CodeEUB600DM
Applicant BusinessSenao Networks, Inc. 🇹🇼
Related Domains senao.com
Equipment ClassWiFi Module
Test FirmSporton International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2014-01-08
5180-5240 MHzOriginal Equipment2014-01-08

Exhibits

DocumentTypeAvailableFile
user manualUsers Manual2014-01-08PDF 454.4 KB
Int PhotosInternal Photos2014-01-08PDF 598.9 KB
ext photosExternal Photos2014-01-08PDF 1.6 MB
labelID Label/Location Info2014-01-08PDF 200.4 KB
Test Report DFSTest Setup Photos2014-01-08PDF 179.2 KB
test setup photosTest Setup Photos2014-01-08PDF 698.1 KB
DFS ReportTest Report2014-01-08PDF 857.8 KB
Test report 5.8GTest Report2014-01-08PDF 2.9 MB
test report 2.4GTest Report2014-01-08PDF 3.7 MB
LTC requestCover Letter(s)2014-01-08PDF 118.9 KB
MA letterCover Letter(s)2014-01-08PDF 132.4 KB
PoACover Letter(s)2014-01-08PDF 23.4 KB
UNII LetterCover Letter(s)2014-01-08PDF 45.6 KB
ad hoc mode letterCover Letter(s)2014-01-08PDF 95.9 KB
MPERF Exposure Info2014-01-08PDF 134.6 KB

Application Information

Application IDgKcM507PAcY9BRQEOiOOUQ==
Final Action Date2014-01-08
Application PurposeOriginal Equipment
Applicant FRN0016080038
Model-EUB600DM
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWiFi Module
Responsible PartyWinston Lee, Winston.Lee@senao.com , 886-3-3289289
AgentGary Gary Gary, International Certification Corp, garychang@icertifi.com.tw , 88632718628
Test FirmAlex Chen, Sporton International Inc., alex@sporton.com.tw , 886-3-327-3456
TCB EmailSelck.bernd@phoenix-testlab.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is the maximum combined conducted peak output power as indicated in the filing. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz and 5755 to 5795 MHz respectively.

Applications

Application IDDatePurpose
gKcM507PAcY9BRQEOiOOUQ==2014-01-08Original Equipment
BnE1lAEcATHQ2XH+4pT6Ww==2014-01-08Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.6315CCC, MO
2422-2452 MHz0.24615CCC, MO
5180-5240 MHz0.04715ECC, MO
5190-5230 MHz0.04515ECC, MO
5260-5320 MHz0.13215ECC, MO
5270-5310 MHz0.14415ECC, MO
5500-5700 MHz0.13915ECC, MO
5510-5670 MHz0.13915ECC, MO
5745-5825 MHz0.44615CCC, MO
5755-5795 MHz0.43215CCC, MO

Grants

TCB Grant - Application gKcM507PAcY9BRQEOiOOUQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 01/08/2014

Application Dated: 01/08/2014
Senao Networks, Inc.
3F, No. 529, Chung Cheng Rd., Hsintien,
Taipei,
Taiwan
 
Attention: Winston Lee

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U2M-EUB600DM
Name of Grantee:  Senao Networks, Inc.
Equipment Class: Digital Transmission System
Notes: WiFi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.63  
CC MO 15C 2422.0  -  2452.0 0.246  
CC MO 15C 5745.0  -  5825.0 0.446  
CC MO 15C 5755.0  -  5795.0 0.432  

Output Power listed is the maximum combined conducted peak output power as indicated in the filing. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz and 5755 to 5795 MHz respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application gKcM507PAcY9BRQEOiOOUQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Senao Networks, Inc.
3F, No. 529, Chung Cheng Rd., Hsintien,
Taipei,
Taiwan
  Date of Grant: 01/08/2014

Application Dated: 01/08/2014
 
Attention: Winston Lee

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U2M-EUB600DM
Name of Grantee:  Senao Networks, Inc.
Equipment Class: Digital Transmission System
Notes: WiFi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.63  
CC MO 15C 2422.0  -  2452.0 0.246  
CC MO 15C 5745.0  -  5825.0 0.446  
CC MO 15C 5755.0  -  5795.0 0.432  

Output Power listed is the maximum combined conducted peak output power as indicated in the filing. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz and 5755 to 5795 MHz respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application BnE1lAEcATHQ2XH+4pT6Ww==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 01/08/2014

Application Dated: 01/08/2014
Senao Networks, Inc.
3F, No. 529, Chung Cheng Rd., Hsintien,
Taipei,
Taiwan
 
Attention: Winston Lee

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U2M-EUB600DM
Name of Grantee:  Senao Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.047  
CC MO 15E 5190.0  -  5230.0 0.045  
CC MO 15E 5260.0  -  5320.0 0.132  
CC MO 15E 5500.0  -  5700.0 0.139  
CC MO 15E 5510.0  -  5670.0 0.139  
CC MO 15E 5270.0  -  5310.0 0.144  

Output Power listed is the maximum combined conducted output power as indicated in the filing. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 5190 to 5230 MHz, 5270 to 5310 MHz, and 5510 to 5670 MHz respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application BnE1lAEcATHQ2XH+4pT6Ww==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Senao Networks, Inc.
3F, No. 529, Chung Cheng Rd., Hsintien,
Taipei,
Taiwan
  Date of Grant: 01/08/2014

Application Dated: 01/08/2014
 
Attention: Winston Lee

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U2M-EUB600DM
Name of Grantee:  Senao Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.047  
CC MO 15E 5190.0  -  5230.0 0.045  
CC MO 15E 5260.0  -  5320.0 0.132  
CC MO 15E 5500.0  -  5700.0 0.139  
CC MO 15E 5510.0  -  5670.0 0.139  
CC MO 15E 5270.0  -  5310.0 0.144  

Output Power listed is the maximum combined conducted output power as indicated in the filing. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 5190 to 5230 MHz, 5270 to 5310 MHz, and 5510 to 5670 MHz respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: