FCC ID U2M-IAP8250AG
Indoor Wireless Access Point
by Senao Networks, Inc.
Grantee Code: U2M Product Code: IAP8250AG
Latest application date: 2016-06-07
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Original Equipment | 2016-06-07 |
| 2412-2462 MHz | Original Equipment | 2016-06-07 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2016-06-07 | PDF 401.1 KB |
| Internal Photos | Internal Photos | 2016-06-07 | PDF 4 MB |
| Internal Photos Metadata only | ID Label/Location Info | 2016-06-07 | PDF 4 MB |
| External Photos | External Photos | 2016-06-07 | PDF 357.8 KB |
| Label Info | ID Label/Location Info | 2016-06-07 | PDF 192.6 KB |
| Test Setup Photos | Test Setup Photos | 2016-06-07 | PDF 376.6 KB |
| Test Setup Photos | Test Setup Photos | 2016-06-07 | PDF 378.4 KB |
| MPE Test Report NON-TXBF 2.4G | RF Exposure Info | 2016-06-07 | PDF 290.5 KB |
| MPE Test Report NON-TXBF_TXBF 2.4G | RF Exposure Info | 2016-06-07 | PDF 302.2 KB |
| Radiated Emission Co-Location Report | Test Report | 2016-06-07 | PDF 107.9 KB |
| Radiated Emission Co-location Report | Test Report | 2016-06-07 | PDF 107.9 KB |
| Test Report 2.4g NON-TXBF | Test Report | 2016-06-07 | PDF 4.8 MB |
| Test Report 2.4g TXBF | Test Report | 2016-06-07 | PDF 3 MB |
| Test Report 5G B1 B4 NON-TXBF Metadata only | Test Report | 2016-06-07 | PDF 5 MB |
| Test Report 5G B1 B4 TXBF Metadata only | Test Report | 2016-06-07 | PDF 3.8 MB |
| Test Report 5G B1-B4 NON-TXBF | Test Report | 2016-06-07 | PDF 5 MB |
| Test Report 5G B1-B4 TXBF | Test Report | 2016-06-07 | PDF 3.9 MB |
| Test Report NON-TXBF Metadata only | Test Report | 2016-06-07 | PDF 4.8 MB |
| Test Report TXBF Metadata only | Test Report | 2016-06-07 | PDF 3 MB |
| Confidentiality Letter | Cover Letter(s) | 2016-06-07 | PDF 24.1 KB |
| DOC Letter | Cover Letter(s) | 2016-06-07 | PDF 195 KB |
| DoC Metadata only | Cover Letter(s) | 2016-06-07 | PDF 18.8 KB |
| POA | Cover Letter(s) | 2016-06-07 | PDF 19.6 KB |
| POA Grantee Contact Person | Cover Letter(s) | 2016-06-07 | PDF 197.8 KB |
| RF Exposure 5G B1 B4 NON-TXBF TXBF Metadata only | RF Exposure Info | 2016-06-07 | PDF 291.2 KB |
| RF Exposure 5G B1 B4 TXBF Metadata only | RF Exposure Info | 2016-06-07 | PDF 301.5 KB |
| RF Exposure NON-TXBF Metadata only | RF Exposure Info | 2016-06-07 | PDF 301.5 KB |
| RF Exposure NON-TXBF TXBF Metadata only | RF Exposure Info | 2016-06-07 | PDF 291.2 KB |
| Block Diagram Metadata only | Block Diagram | PDF 82.2 KB | |
| Schematics Metadata only | Schematics | PDF 1,021.1 KB | |
| Operational Description Metadata only | Operational Description | PDF 102 KB | |
| Operational Description Software Security Requirements Metadata only | Operational Description | PDF 33.5 KB |
Application Information
| Application ID | TUxjffPuWv96o6PObzGzMg== |
|---|---|
| Final Action Date | 2016-06-07 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0016080038 |
| Model | IAP8250AG |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Indoor Wireless Access Point |
| Responsible Party | Patricia Li, patricia.li@senao.com  , 886-3-3289289 |
| Test Firm | Sharon Jiang, SPORTON International Inc., sharonjiang@sporton.com.tw  , 886-3-656-9065 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| TUxjffPuWv96o6PObzGzMg== | 2016-06-07 | Original Equipment |
| GUw6CnN4izZuneXTlE61Hg== | 2016-06-07 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application TUxjffPuWv96o6PObzGzMg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 06/07/2016 Application Dated: 05/25/2016 |
| Senao Networks, Inc. |
| 3F, No. 529, Chung Cheng Rd., Hsintien, |
| Taipei, Taiwan |
| Attention: Patricia Li |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U2M-IAP8250AG |
| Name of Grantee: | Senao Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Indoor Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.433 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.762 |
| Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application TUxjffPuWv96o6PObzGzMg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Senao Networks, Inc. 3F, No. 529, Chung Cheng Rd., Hsintien, Taipei, Taiwan |
Date of Grant: 06/07/2016 Application Dated: 05/25/2016 |
| Attention: Patricia Li |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U2M-IAP8250AG |
| Name of Grantee: | Senao Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Indoor Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.433 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.762 |
| Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 06/07/2016 Application Dated: 05/25/2016 |
| Senao Networks, Inc. |
| 3F, No. 529, Chung Cheng Rd., Hsintien, |
| Taipei, Taiwan |
| Attention: Patricia Li |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U2M-IAP8250AG |
| Name of Grantee: | Senao Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Indoor Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.682 |
| Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application GUw6CnN4izZuneXTlE61Hg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Senao Networks, Inc. 3F, No. 529, Chung Cheng Rd., Hsintien, Taipei, Taiwan |
Date of Grant: 06/07/2016 Application Dated: 05/25/2016 |
| Attention: Patricia Li |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U2M-IAP8250AG |
| Name of Grantee: | Senao Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Indoor Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.682 |
| Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |