FCC ID U2M-PCE3300AN
802.11a/b/g/n PCIe module
by Senao Networks, Inc.
Grantee Code: U2M Product Code: PCE3300AN
Latest application date: 2016-06-06
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2016-06-06 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2013-11-15 |
| 5180-5240 MHz | Original Equipment | 2013-01-15 |
| 2412-2462 MHz | Original Equipment | 2013-01-15 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual_rev | Users Manual | 2016-06-06 | PDF 110.3 KB |
| User Manual | Users Manual | 2013-01-15 | PDF 224.2 KB |
| Internal Photos.pdf | Internal Photos | 2013-11-15 | PDF 1 MB |
| Internal Photos | Internal Photos | 2013-01-15 | PDF 1 MB |
| External Photos.pdf | External Photos | 2013-11-15 | PDF 2.1 MB |
| External Photos | External Photos | 2013-01-15 | PDF 3.6 MB |
| Label | ID Label/Location Info | 2013-01-15 | PDF 18.3 KB |
| Label Location | ID Label/Location Info | 2013-01-15 | PDF 837.4 KB |
| Operational Description | Operational Description | 2013-01-15 | PDF 17.6 KB |
| Test Setup Photos.pdf | Test Setup Photos | 2013-11-15 | PDF 222.3 KB |
| Test Setup Photos | Test Setup Photos | 2013-01-15 | PDF 596.5 KB |
| Test Report (Collocated).pdf | Test Report | 2013-11-15 | PDF 311.2 KB |
| Test Report (DTS).pdf | Test Report | 2013-11-15 | PDF 312.2 KB |
| Test Report - 15C | Test Report | 2013-01-15 | PDF 3.8 MB |
| Test Report - 15E | Test Report | 2013-01-15 | PDF 652.9 KB |
| Cover Letter (Hardware Antenna Attestation)_rev | Cover Letter(s) | 2016-06-06 | PDF 148.1 KB |
| Attestation - Channel and Mode Declaration | Attestation Statements | 2013-01-15 | PDF 45.1 KB |
| Confidentiality Request | Cover Letter(s) | 2016-06-06 | PDF 54.2 KB |
| Cover Letter (Agent Authorization) | Cover Letter(s) | 2016-06-06 | PDF 67.2 KB |
| Cover Letter (Description of Change) | Cover Letter(s) | 2016-06-06 | PDF 10.6 KB |
| Cover Letter (no power levels increased for U-NII-1) | Cover Letter(s) | 2016-06-06 | PDF 94.3 KB |
| Cover Letter (no power levels increased for U-NII-3) | Cover Letter(s) | 2016-06-06 | PDF 134.3 KB |
| Cover Letter (Agent Authorization).pdf | Cover Letter(s) | 2013-11-15 | PDF 55.1 KB |
| Cover Letter (Description of Change).pdf | Cover Letter(s) | 2013-11-15 | PDF 10 KB |
| Confidentiality Request | Cover Letter(s) | 2013-01-15 | PDF 53.1 KB |
| Cover Letter - Agent Authorization | Cover Letter(s) | 2013-01-15 | PDF 49.3 KB |
| Cover Letter - Modular Approval Request | Cover Letter(s) | 2013-01-15 | PDF 44.9 KB |
| RF Exposure Info.pdf | RF Exposure Info | 2013-11-15 | PDF 50 KB |
| RF Exposure Info | RF Exposure Info | 2013-01-15 | PDF 75.3 KB |
| Software Operating Description Metadata only | Operational Description | PDF 159.1 KB |
Application Information
| Application ID | akBW9V4lSy//X7ThAdj6Gg== |
|---|---|
| Final Action Date | 2016-06-06 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0016080038 |
| Model | PCE3300AN |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 802.11a/b/g/n PCIe module |
| Responsible Party | Patricia Li, patricia.li@senao.com  , 886-3-3289289 |
| Test Firm | Richard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@bureauveritas.com  , +886-(0)3-260-0884 |
| TCB Email | certification@curtis-straus.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to update 5.2GHz and 5.8GHz band. This change is for a device previously granted under rule parts of 15.247 of U-NII-3 band and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi and update U-NII-1 band to new rule with no changes to hardware or output power. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| akBW9V4lSy//X7ThAdj6Gg== | 2016-06-06 | Class II permissive change or modification of presently authorized equipment |
| /UUHREt+GsEfyWy5LwCZRw== | 2013-11-15 | Class II permissive change or modification of presently authorized equipment |
| redSvuhzYGBjLaEAshaTFQ== | 2013-01-15 | Original Equipment |
| TNEwfkbQeOHICZ7SRdUFfA== | 2013-01-15 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application TNEwfkbQeOHICZ7SRdUFfA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 01/15/2013 Application Dated: 01/15/2013 |
| Senao Networks, Inc. |
| 3F, No. 529, Chung Cheng Rd., Hsintien, |
| Taipei, Taiwan |
| Attention: Winston Lee |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U2M-PCE3300AN |
| Name of Grantee: | Senao Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n PCIe module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.241 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.144 |
| Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application TNEwfkbQeOHICZ7SRdUFfA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Senao Networks, Inc. 3F, No. 529, Chung Cheng Rd., Hsintien, Taipei, Taiwan |
Date of Grant: 01/15/2013 Application Dated: 01/15/2013 |
| Attention: Winston Lee |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U2M-PCE3300AN |
| Name of Grantee: | Senao Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n PCIe module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.241 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.144 |
| Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 01/15/2013 Application Dated: 01/15/2013 |
| Senao Networks, Inc. |
| 3F, No. 529, Chung Cheng Rd., Hsintien, |
| Taipei, Taiwan |
| Attention: Winston Lee |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U2M-PCE3300AN |
| Name of Grantee: | Senao Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n PCIe module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.026 |
| Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application redSvuhzYGBjLaEAshaTFQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Senao Networks, Inc. 3F, No. 529, Chung Cheng Rd., Hsintien, Taipei, Taiwan |
Date of Grant: 01/15/2013 Application Dated: 01/15/2013 |
| Attention: Winston Lee |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U2M-PCE3300AN |
| Name of Grantee: | Senao Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n PCIe module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.026 |
| Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 06/06/2016 Application Dated: 06/02/2016 |
| Senao Networks, Inc. |
| 3F, No. 529, Chung Cheng Rd., Hsintien, |
| Taipei, Taiwan |
| Attention: Patricia Li |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U2M-PCE3300AN |
| Name of Grantee: | Senao Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n PCIe module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.026 | ||
| 49 CC MO | 15E | 5745.0 - 5825.0 | 0.144 |
| Class II Permissive Change to update 5.2GHz and 5.8GHz band. This change is for a device previously granted under rule parts of 15.247 of U-NII-3 band and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi and update U-NII-1 band to new rule with no changes to hardware or output power. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application akBW9V4lSy//X7ThAdj6Gg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Senao Networks, Inc. 3F, No. 529, Chung Cheng Rd., Hsintien, Taipei, Taiwan |
Date of Grant: 06/06/2016 Application Dated: 06/02/2016 |
| Attention: Patricia Li |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U2M-PCE3300AN |
| Name of Grantee: | Senao Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n PCIe module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.026 | ||
| 49 CC MO | 15E | 5745.0 - 5825.0 | 0.144 |
| Class II Permissive Change to update 5.2GHz and 5.8GHz band. This change is for a device previously granted under rule parts of 15.247 of U-NII-3 band and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi and update U-NII-1 band to new rule with no changes to hardware or output power. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 11/15/2013 Application Dated: 11/15/2013 |
| Senao Networks, Inc. |
| 3F, No. 529, Chung Cheng Rd., Hsintien, |
| Taipei, Taiwan |
| Attention: Winston Lee |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U2M-PCE3300AN |
| Name of Grantee: | Senao Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n PCIe module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.241 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.144 |
| Class II permissive change as described in this filing. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application /UUHREt+GsEfyWy5LwCZRw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Senao Networks, Inc. 3F, No. 529, Chung Cheng Rd., Hsintien, Taipei, Taiwan |
Date of Grant: 11/15/2013 Application Dated: 11/15/2013 |
| Attention: Winston Lee |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U2M-PCE3300AN |
| Name of Grantee: | Senao Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n PCIe module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.241 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.144 |
| Class II permissive change as described in this filing. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |