FCC ID U2M-PCE3200AH

U2MPCE3200AH, U2M PCE3200AH, U2M-PCE3200AH, U2M-PCE32OOAH

Senao Networks, Inc. 802.11bgn PCIe Module PCE3200AH

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: U2M-PCE3200AH is U2M. The remaining characters of the FCC ID, -PCE3200AH, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: 802.11bgn PCIe Module

App # Purpose Date Unique ID
1 Original Equipment 2013-01-31 P6psaQAZry2x1YnIanCQqw==
2 Class II Permissive Change 2013-09-26 kWMVQbePjwEdy5GdKrn+YA==

Operating Frequencies

Frequency RangePower OutputRule PartsGrant Notes App #
2.412-2.462 GHz 2.4 GHz WiFi765.6 mW15CMO 2.1
2.412-2.462 GHz 2.4 GHz WiFi765.6 mW15CMO 1.1
2.422-2.452 GHz 2.4 GHz WiFi199.6 mW15CMO 2.2
2.422-2.452 GHz 2.4 GHz WiFi199.6 mW15CMO 1.2

Exhibits

Available Exhibits

App #Document Type Submitted
Available
2 Test Setup photosTest Setup Photos
Adobe Acrobat PDF (621 kB)		 2013-09-26
2013-09-26
2 test reportTest Report
Adobe Acrobat PDF (3728 kB)		 2013-09-26
2013-09-26
2 RF Exposure Info MPERF Exposure Info
Adobe Acrobat PDF (123 kB)		 2013-09-26
2013-09-26
2 Letter PoACover Letter(s)
Adobe Acrobat PDF (110 kB)		 2013-09-26
2013-09-26
1 User ManualUsers Manual
Adobe Acrobat PDF (166 kB)		 2013-01-31
2013-01-31
1 Test PhotosTest Setup Photos
Adobe Acrobat PDF (395 kB)		 2013-01-31
2013-01-31
1 Letter POACover Letter(s)
Adobe Acrobat PDF (38 kB)		 2013-01-31
2013-01-31
1 RF ExposureRF Exposure Info
Adobe Acrobat PDF (99 kB)		 2013-01-31
2013-01-31
1 Module Approval Request LetterCover Letter(s)
Adobe Acrobat PDF (17 kB)		 2013-01-31
2013-01-31
1 Label infoID Label/Location Info
Adobe Acrobat PDF (132 kB)		 2013-01-31
2013-01-31
1 Internal PhotosInternal Photos
Adobe Acrobat PDF (336 kB)		 2013-01-31
2013-01-31
1 Test ReportTest Report
Adobe Acrobat PDF (1618 kB)		 2013-01-31
2013-01-31
1 External photosExternal Photos
Adobe Acrobat PDF (338 kB)		 2013-01-31
2013-01-31
1 DoC LetterCover Letter(s)
Adobe Acrobat PDF (37 kB)		 2013-01-31
2013-01-31
1 Confidentiality LetterCover Letter(s)
Adobe Acrobat PDF (43 kB)		 2013-01-31
2013-01-31
1 Adhoc Mode DeclarationAttestation Statements
Adobe Acrobat PDF (32 kB)		 2013-01-31
2013-01-31

APP # 2 (2013-09-26)

App # Document Type Submitted
Available
2 Test Setup photos Test Setup Photos
Adobe Acrobat PDF (621 kB)		 2013-09-26 00:00:00
2013-09-26 00:00:00
2 test report Test Report
Adobe Acrobat PDF (3728 kB)		 2013-09-26 00:00:00
2013-09-26 00:00:00
2 RF Exposure Info MPE RF Exposure Info
Adobe Acrobat PDF (123 kB)		 2013-09-26 00:00:00
2013-09-26 00:00:00
2 Letter PoA Cover Letter(s)
Adobe Acrobat PDF (110 kB)		 2013-09-26 00:00:00
2013-09-26 00:00:00

APP # 1 (2013-01-31)

App # Document Type Submitted
Available
1 User Manual Users Manual
Adobe Acrobat PDF (166 kB)		 2013-01-31 00:00:00
2013-01-31 00:00:00
1 Test Photos Test Setup Photos
Adobe Acrobat PDF (395 kB)		 2013-01-31 00:00:00
2013-01-31 00:00:00
1 Letter POA Cover Letter(s)
Adobe Acrobat PDF (38 kB)		 2013-01-31 00:00:00
2013-01-31 00:00:00
1 RF Exposure RF Exposure Info
Adobe Acrobat PDF (99 kB)		 2013-01-31 00:00:00
2013-01-31 00:00:00
1 Module Approval Request Letter Cover Letter(s)
Adobe Acrobat PDF (17 kB)		 2013-01-31 00:00:00
2013-01-31 00:00:00
1 Label info ID Label/Location Info
Adobe Acrobat PDF (132 kB)		 2013-01-31 00:00:00
2013-01-31 00:00:00
1 Internal Photos Internal Photos
Adobe Acrobat PDF (336 kB)		 2013-01-31 00:00:00
2013-01-31 00:00:00
1 Test Report Test Report
Adobe Acrobat PDF (1618 kB)		 2013-01-31 00:00:00
2013-01-31 00:00:00
1 External photos External Photos
Adobe Acrobat PDF (338 kB)		 2013-01-31 00:00:00
2013-01-31 00:00:00
1 DoC Letter Cover Letter(s)
Adobe Acrobat PDF (37 kB)		 2013-01-31 00:00:00
2013-01-31 00:00:00
1 Confidentiality Letter Cover Letter(s)
Adobe Acrobat PDF (43 kB)		 2013-01-31 00:00:00
2013-01-31 00:00:00
1 Adhoc Mode Declaration Attestation Statements
Adobe Acrobat PDF (32 kB)		 2013-01-31 00:00:00
2013-01-31 00:00:00
1 Operation Description Operational Description
Adobe Acrobat PDF (118 kB)		 2013-01-31 00:00:00
N/A
1 Block Diagram Block Diagram
Adobe Acrobat PDF (13 kB)		 2013-01-31 00:00:00
N/A
1 Schematic Schematics
Adobe Acrobat PDF (147 kB)		 2013-01-31 00:00:00
N/A

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Senao Networks, Inc.
FCC Registration Number (FRN): 0016080038
Alphanumeric FCC ID: U2MPCE3200AH
Unique Application Identifier: P6psaQAZry2x1YnIanCQqw==
Line one: 3F, No. 529, Chung Cheng Rd., Hsintien,
City: Taipei
State: N/A
Country: Taiwan

TCB Information
TCB Application Email Address: bentje.holger@phoenix-testlab.de
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: U2M
Product Code: -PCE3200AH

Person at the applicant's address to receive grant or for contact
Name: Winston Lee
Telephone Number: 886-3-3289289 Extension: 2170
Fax Number: 886-3-3961112
Email: Winston.Lee@senao.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 802.11 bgn PCle Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   SPORTON International Inc.
First Name:   Leo
Last Name:   Huang
Telephone Number: 886-3-6569065 Extension: 666
Fax Number:  886-3-6569085
E-mail:  leohuang@sporton.com.tw

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power listed is the maximum combined conducted output power as indicated in the filing. This OEM module is approved for use in products operating as fixed or mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz respectively.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Leo Huang
Title of authorized signature:  Manager

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Senao Networks, Inc.
FCC Registration Number (FRN): 0016080038
Alphanumeric FCC ID: U2MPCE3200AH
Unique Application Identifier: kWMVQbePjwEdy5GdKrn+YA==
Line one: 3F, No. 529, Chung Cheng Rd., Hsintien,
City: Taipei
State: N/A
Country: Taiwan

TCB Information
TCB Application Email Address: Selck.bernd@phoenix-testlab.de
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: U2M
Product Code: -PCE3200AH

Person at the applicant's address to receive grant or for contact
Name: Winston Lee
Telephone Number: 886-3-3289289 Extension: 2170
Fax Number: 886-3-3961112
Email: Winston.Lee@senao.com
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   No

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): 802.11bgn PCIe Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Sporton International Inc.
First Name:   Alex
Last Name:   Chen
Telephone Number: 886-3-327-3456 Extension: 650
Fax Number:  886-3-327-0973
E-mail:  alex@sporton.com.tw

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II permissive change to cover FCC KDB 558074. Power listed is the maximum combined conducted output power as indicated in the filing. This OEM module is approved for use in products operating as fixed or mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz respectively.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Gary Chang
Title of authorized signature: 

Complete items below if agent signs the application:

Firm Name:  International Certification Corp.
Name:  Gary Gary Gary
Line 1:  Gary
Line 2:  Gary
P.O. Box:  Gary
City:  Gary
State:  Gary
Country:  Gary
Zip Code:  Gary
Telephone Number:  88632718628
Fax Number:  88633180155
E-mail:  garychang@icertifi.com.tw

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany 		Date of Grant: 09/26/2013

Application Dated: 09/26/2013
Senao Networks, Inc.
3F, No. 529, Chung Cheng Rd., Hsintien,
Taipei,
Taiwan
 
Attention: Winston Lee

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U2M-PCE3200AH
Name of Grantee:  Senao Networks, Inc.
Equipment Class: Digital Transmission System
Notes: 802.11bgn PCIe Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
MO 15C 2412.0  -  2462.0 0.7656  
MO 15C 2422.0  -  2452.0 0.1996  

Class II permissive change to cover FCC KDB 558074.

Power listed is the maximum combined conducted output power as indicated in the filing. This OEM module is approved for use in products operating as fixed or mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz respectively.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Senao Networks, Inc.
3F, No. 529, Chung Cheng Rd., Hsintien,
Taipei,
Taiwan 		  Date of Grant: 09/26/2013

Application Dated: 09/26/2013
 
Attention: Winston Lee

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U2M-PCE3200AH
Name of Grantee:  Senao Networks, Inc.
Equipment Class: Digital Transmission System
Notes: 802.11bgn PCIe Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
MO 15C 2412.0  -  2462.0 0.7656  
MO 15C 2422.0  -  2452.0 0.1996  

Class II permissive change to cover FCC KDB 558074.

Power listed is the maximum combined conducted output power as indicated in the filing. This OEM module is approved for use in products operating as fixed or mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz respectively.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:


EA772900
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany 		Date of Grant: 01/31/2013

Application Dated: 01/30/2013
Senao Networks, Inc.
3F, No. 529, Chung Cheng Rd., Hsintien,
Taipei,
Taiwan
 
Attention: Winston Lee

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U2M-PCE3200AH
Name of Grantee:  Senao Networks, Inc.
Equipment Class: Digital Transmission System
Notes: 802.11 bgn PCle Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
MO 15C 2412.0  -  2462.0 0.7656  
MO 15C 2422.0  -  2452.0 0.1996  

Power listed is the maximum combined conducted output power as indicated in the filing. This OEM module is approved for use in products operating as fixed or mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz respectively.

MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Senao Networks, Inc.
3F, No. 529, Chung Cheng Rd., Hsintien,
Taipei,
Taiwan 		  Date of Grant: 01/31/2013

Application Dated: 01/30/2013
 
Attention: Winston Lee

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U2M-PCE3200AH
Name of Grantee:  Senao Networks, Inc.
Equipment Class: Digital Transmission System
Notes: 802.11 bgn PCle Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
MO 15C 2412.0  -  2462.0 0.7656  
MO 15C 2422.0  -  2452.0 0.1996  

Power listed is the maximum combined conducted output power as indicated in the filing. This OEM module is approved for use in products operating as fixed or mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz respectively.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:


EA342307

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details