FCC ID U3D-INTELLICOM

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

MET Laboratories, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230-3432

Date of Grant: 09/19/2011 Application Dated: 09/19/2011

S&C Electric Company

1135 Atlantic Avenue Ste 100

Alameda, CA 94501

Attention: David Munoz , Test Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	U3D-INTELLICOM
Name of Grantee:	S&C Electric Company
Equipment Class:	Digital Transmission System
Notes:	IntelliCom WAN 1720 Mesh Node

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.652
CC MO	15C	2437.0  -  2437.0	0.514
CC MO	15C	5745.0  -  5825.0	0.906
CC MO	15C	5755.0  -  5795.0	0.85

Power listed is maximum combined conducted peak output. Device is a Mesh Node operating in 3x3 MIMO mode as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 76 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

S&C Electric Company 1135 Atlantic Avenue Ste 100 Alameda, CA 94501 United States

Date of Grant: 09/19/2011 Application Dated: 09/19/2011

Attention: David Munoz , Test Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	U3D-INTELLICOM
Name of Grantee:	S&C Electric Company
Equipment Class:	Digital Transmission System
Notes:	IntelliCom WAN 1720 Mesh Node
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.652
CC MO	15C	2437.0  -  2437.0	0.514
CC MO	15C	5745.0  -  5825.0	0.906
CC MO	15C	5755.0  -  5795.0	0.85

Power listed is maximum combined conducted peak output. Device is a Mesh Node operating in 3x3 MIMO mode as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 76 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application QcVjakVGBN4iXLKsNukz1A==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

MET Laboratories, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230-3432

Date of Grant: 09/19/2011 Application Dated: 09/19/2011

S&C Electric Company

1135 Atlantic Avenue Ste 100

Alameda, CA 94501

Attention: David Munoz , Test Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	U3D-INTELLICOM
Name of Grantee:	S&C Electric Company
Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	IntelliCom WAN 1720 Mesh Node

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90Y	4945.0  -  4985.0	0.234	17.0  PM	4M14D7D
	90Y	4945.0  -  4985.0	0.267	17.0  PM	8M27D7D
	90Y	4950.0  -  4980.0	0.261	17.0  PM	16M4D7D

Power Output listed is conducted. Operation is for point-to-point or point-to-multi-point use in the 4.9 GHz licensed band. The antenna(s) must be installed to provide an appropriate separation distance, as outlined in the MPE exhibit in this filing. Antenna(s) with gain exceeding 26 dBi must reduce transmit power per requirements in 90.1215(a). End Users and Installers must be provided with antenna installation instructions and transmitter operation conditions for satisfying RF exposure compliance.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

S&C Electric Company 1135 Atlantic Avenue Ste 100 Alameda, CA 94501 United States

Date of Grant: 09/19/2011 Application Dated: 09/19/2011

Attention: David Munoz , Test Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	U3D-INTELLICOM
Name of Grantee:	S&C Electric Company
Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	IntelliCom WAN 1720 Mesh Node
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90Y	4945.0  -  4985.0	0.234	17.0  PM	4M14D7D
	90Y	4945.0  -  4985.0	0.267	17.0  PM	8M27D7D
	90Y	4950.0  -  4980.0	0.261	17.0  PM	16M4D7D

Power Output listed is conducted. Operation is for point-to-point or point-to-multi-point use in the 4.9 GHz licensed band. The antenna(s) must be installed to provide an appropriate separation distance, as outlined in the MPE exhibit in this filing. Antenna(s) with gain exceeding 26 dBi must reduce transmit power per requirements in 90.1215(a). End Users and Installers must be provided with antenna installation instructions and transmitter operation conditions for satisfying RF exposure compliance.

TCB Grant - Application jrsu6SfW6HQOT/Ks49lnKA==

EAS Grant - Application jrsu6SfW6HQOT/Ks49lnKA==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

S and C Electric 6601 N. Ridge Boulevard Chicago, IL 60626 United States

Date of Grant: 06/25/2013 Application Dated: 04/11/2012

Attention: Muhammad Tabani , Test Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	U3D-INTELLICOM
Name of Grantee:	S and C Electric
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	IntelliCom WAN 1720 Mesh Node
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15E	5260.0  -  5320.0	0.105
	15E	5500.0  -  5580.0	0.105
	15E	5660.0  -  5700.0	0.105

Power listed is maximum combined conducted peak output. Device is a Mesh Node operating in 3x3 MIMO mode as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 76 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Users and installers must be provided with adequate instructions such that the transmit power can be adjusted for use with antennas of a gain higher than 6 dBi.

TCB Grant - Application IhjDlvSUxor1NwbHXIHorA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

MET Laboratories, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230-3432

Date of Grant: 09/19/2011 Application Dated: 09/19/2011

S&C Electric Company

1135 Atlantic Avenue Ste 100

Alameda, CA 94501

Attention: David Munoz , Test Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	U3D-INTELLICOM
Name of Grantee:	S&C Electric Company
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	IntelliCom WAN 1720 Mesh Node

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5745.0  -  5805.0	0.153
CC MO	15E	5755.0  -  5795.0	0.189

Power listed is maximum combined conducted peak output. Device is a Mesh Node operating in 3x3 MIMO mode as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 76 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Users and installers must be provided with adequate instructions such that the transmit power can be adjusted for use with antennas of a gain higher than 6 dBi.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

S&C Electric Company 1135 Atlantic Avenue Ste 100 Alameda, CA 94501 United States

Date of Grant: 09/19/2011 Application Dated: 09/19/2011

Attention: David Munoz , Test Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	U3D-INTELLICOM
Name of Grantee:	S&C Electric Company
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	IntelliCom WAN 1720 Mesh Node
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5745.0  -  5805.0	0.153
CC MO	15E	5755.0  -  5795.0	0.189

Power listed is maximum combined conducted peak output. Device is a Mesh Node operating in 3x3 MIMO mode as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 76 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Users and installers must be provided with adequate instructions such that the transmit power can be adjusted for use with antennas of a gain higher than 6 dBi.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: