FCC ID U3D-US1710DA

IntelliCom DA Mesh Radio

by S and C Electric

Grantee Code: U3D   Product Code: US1710DA
Latest application date: 2013-05-30

FCC ID Device Details

FCC IDU3D-US1710DA
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeU3D
Product CodeUS1710DA
Applicant BusinessS and C Electric 🇺🇸
Related Domains sandc.com
Equipment ClassIntelliCom DA Mesh Radio
Test FirmMET Laboratories, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
4942.5-4987.5 MHzOriginal Equipment2013-05-30
5180-5240 MHzOriginal Equipment2013-05-30
2412-2462 MHzOriginal Equipment2013-05-30

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2013-07-14PDF 799.4 KB
Internal PhotosInternal Photos2013-07-14PDF 617.8 KB
External PhotosExternal Photos2013-07-14PDF 510.3 KB
Label and LocationID Label/Location Info2013-05-30PDF 550.1 KB
Test Setup PhotosTest Setup Photos2013-07-14PDF 477.2 KB
Test Setup PhotosTest Setup Photos2013-07-14PDF 210.4 KB
Test Setup Photos - UNII 1Test Setup Photos2013-07-14PDF 311.4 KB
Test Setup Photos - UNII 3Test Setup Photos2013-07-14PDF 311.4 KB
Test Report - Part 15.247Test Report2013-05-30PDF 3.6 MB
Test Report - Part 90YTest Report2013-05-30PDF 1.7 MB
Test Report - UNII 1Test Report2013-05-30PDF 1.8 MB
Test Report - UNII 3Test Report2013-05-30PDF 1.9 MB
Attestation LetterAttestation Statements2013-05-30PDF 335.7 KB
Confidentiality Request LetterCover Letter(s)2013-05-30PDF 299.7 KB
Short Term Confidentiality Request LetterCover Letter(s)2013-05-30PDF 353.1 KB
Antenna DatasheetRF Exposure Info2013-05-30PDF 367.1 KB
MPERF Exposure Info2013-05-30PDF 89 KB
MPERF Exposure Info2013-05-30PDF 88.6 KB
MPE - UNII 1RF Exposure Info2013-05-30PDF 87.3 KB
MPE - UNII 3RF Exposure Info2013-05-30PDF 87.2 KB

Application Information

Application IDy4KxACMicBa1UXXYcsIISA==
Final Action Date2013-05-30
Application PurposeOriginal Equipment
Applicant FRN0016116337
Model-US1710DA
Frequency Range4942.5-4987.5 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionIntelliCom DA Mesh Radio
Responsible PartyDavid L. Munoz, Test Engineer, dmunoz@sandc.com , 510-749-5633
Technical ContactPrakash Ramadass, S&C; Electric Company, Prakash.Ramadass@sandc.com , 5107495648
Test FirmRam Shrestha, MET Laboratories, Inc., rshrestha@metlabs.com , 4082874793
TCB Emailtcbinfo@metlabs.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97
Short-Term ConfidentialityYes
Short-Term Confidentiality Date07/14/2013
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
y4KxACMicBa1UXXYcsIISA==2013-05-30Original Equipment
qdVFlRvZWxwOfbO+2jORsQ==2013-05-30Original Equipment
b2kDcs0Am5WSEZVa8WQMYg==2013-05-30Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
2412-2462 MHz0.40215CCC
2427-2437 MHz0.39415CCC
4942.5-4987.5 MHz0.48517ppm4M19D7D90Y
4945-4985 MHz0.25917ppm8M26D7D90Y
4950-4980 MHz0.22817ppm16M52D790Y
5180-5240 MHz0.02915ECC
5190-5230 MHz0.04715ECC
5745-5825 MHz0.25415CCC
5745-5805 MHz0.26715ECC
5755-5795 MHz0.27315CCC
5755-5795 MHz0.18515ECC

Grants

TCB Grant - Application y4KxACMicBa1UXXYcsIISA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MET Laboratories, Inc.
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 05/30/2013

Application Dated: 05/30/2013
S&C Electric Company
1135 Atlantic Avenue Ste 100
Alameda, CA 94501
 
Attention: David Munoz , Test Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U3D-US1710DA
Name of Grantee:  S&C Electric Company
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: IntelliCom DA Mesh Radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90Y 4942.5  -  4987.5 0.485 17.0  PM 4M19D7D
90Y 4945.0  -  4985.0 0.259 17.0  PM 8M26D7D
90Y 4950.0  -  4980.0 0.228 17.0  PM 16M52D7

Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application y4KxACMicBa1UXXYcsIISA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

S&C Electric Company
1135 Atlantic Avenue Ste 100
Alameda, CA 94501
United States
  Date of Grant: 05/30/2013

Application Dated: 05/30/2013
 
Attention: David Munoz , Test Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U3D-US1710DA
Name of Grantee:  S&C Electric Company
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: IntelliCom DA Mesh Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90Y 4942.5  -  4987.5 0.485 17.0  PM 4M19D7D
90Y 4945.0  -  4985.0 0.259 17.0  PM 8M26D7D
90Y 4950.0  -  4980.0 0.228 17.0  PM 16M52D7

Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application qdVFlRvZWxwOfbO+2jORsQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MET Laboratories, Inc.
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 05/30/2013

Application Dated: 05/30/2013
S&C Electric Company
1135 Atlantic Avenue Ste 100
Alameda, CA 94501
 
Attention: David Munoz , Test Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U3D-US1710DA
Name of Grantee:  S&C Electric Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IntelliCom DA Mesh Radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.029  
CC 15E 5190.0  -  5230.0 0.047  
CC 15E 5745.0  -  5805.0 0.267  
CC 15E 5755.0  -  5795.0 0.185  

Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application qdVFlRvZWxwOfbO+2jORsQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

S&C Electric Company
1135 Atlantic Avenue Ste 100
Alameda, CA 94501
United States
  Date of Grant: 05/30/2013

Application Dated: 05/30/2013
 
Attention: David Munoz , Test Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U3D-US1710DA
Name of Grantee:  S&C Electric Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IntelliCom DA Mesh Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.029  
CC 15E 5190.0  -  5230.0 0.047  
CC 15E 5745.0  -  5805.0 0.267  
CC 15E 5755.0  -  5795.0 0.185  

Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application b2kDcs0Am5WSEZVa8WQMYg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MET Laboratories, Inc.
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 05/30/2013

Application Dated: 05/30/2013
S&C Electric Company
1135 Atlantic Avenue Ste 100
Alameda, CA 94501
 
Attention: David Munoz , Test Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U3D-US1710DA
Name of Grantee:  S&C Electric Company
Equipment Class: Digital Transmission System
Notes: IntelliCom DA Mesh Radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.402  
CC 15C 2427.0  -  2437.0 0.394  
CC 15C 5745.0  -  5825.0 0.254  
CC 15C 5755.0  -  5795.0 0.273  

Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application b2kDcs0Am5WSEZVa8WQMYg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

S&C Electric Company
1135 Atlantic Avenue Ste 100
Alameda, CA 94501
United States
  Date of Grant: 05/30/2013

Application Dated: 05/30/2013
 
Attention: David Munoz , Test Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U3D-US1710DA
Name of Grantee:  S&C Electric Company
Equipment Class: Digital Transmission System
Notes: IntelliCom DA Mesh Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.402  
CC 15C 2427.0  -  2437.0 0.394  
CC 15C 5745.0  -  5825.0 0.254  
CC 15C 5755.0  -  5795.0 0.273  

Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: