FCC ID U48-RC002B

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 08/21/2012 Application Dated: 08/21/2012

LevelStar, LLC

1500 Cherry St. Suite D

Louisville, CO 80027

Attention: Matt Mulcahy

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	U48-RC002B
Name of Grantee:	LevelStar, LLC
Equipment Class:	PCS Licensed Transmitter
Notes:	Nyos LGA CDMA Module

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BC	22H	824.2  -  848.8	1.9498	2.5  PM	245KGXW
BC	22H	824.2  -  848.8	1.2023	2.5  PM	246KG7W
BC	22H	826.4  -  846.6	0.3837	2.5  PM	4M15F9W
BC	22H	824.7  -  848.31	0.26	2.5  PM	1M26F9W
BC	24E	1850.2  -  1909.8	0.912	2.5  PM	245KGXW
BC	24E	1850.2  -  1909.8	0.912	2.5  PM	245KG7W
BC	24E	1852.4  -  1907.6	0.3491	2.5  PM	4M16F9W
BC	24E	1851.25  -  1908.75	0.2143	2.5  PM	1M27F9W

Power out is conducted at the antenna terminal. ERP for part 22 is 31.81 dBm and EIRP for part 24 is 28.79 dBm, utilizing the specific antenna as shown in applications under this FCC ID. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This C2PC adds the antenna information and adjusts the Peak Conducted Power on the Grant. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 5.53 dBi at 850 MHz and 3.41 dBi at 1900 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W ERP Part 22 and the 2W EIRP Part 24 power limits. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.

BC:	The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

LevelStar, LLC 1500 Cherry St. Suite D Louisville, CO 80027 United States

Date of Grant: 08/21/2012 Application Dated: 08/21/2012

Attention: Matt Mulcahy

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	U48-RC002B
Name of Grantee:	LevelStar, LLC
Equipment Class:	PCS Licensed Transmitter
Notes:	Nyos LGA CDMA Module
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BC	22H	824.2  -  848.8	1.9498	2.5  PM	245KGXW
BC	22H	824.2  -  848.8	1.2023	2.5  PM	246KG7W
BC	22H	826.4  -  846.6	0.3837	2.5  PM	4M15F9W
BC	22H	824.7  -  848.31	0.26	2.5  PM	1M26F9W
BC	24E	1850.2  -  1909.8	0.912	2.5  PM	245KGXW
BC	24E	1850.2  -  1909.8	0.912	2.5  PM	245KG7W
BC	24E	1852.4  -  1907.6	0.3491	2.5  PM	4M16F9W
BC	24E	1851.25  -  1908.75	0.2143	2.5  PM	1M27F9W

Power out is conducted at the antenna terminal. ERP for part 22 is 31.81 dBm and EIRP for part 24 is 28.79 dBm, utilizing the specific antenna as shown in applications under this FCC ID. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This C2PC adds the antenna information and adjusts the Peak Conducted Power on the Grant. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 5.53 dBi at 850 MHz and 3.41 dBi at 1900 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W ERP Part 22 and the 2W EIRP Part 24 power limits. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.

BC:	The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application N8eVeClaycE/5U02X/oNLw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 08/24/2012 Application Dated: 08/24/2012

LevelStar, LLC

1500 Cherry St. Suite D

Louisville, CO 80027

Attention: Matt Mulcahy

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	U48-RC002B
Name of Grantee:	LevelStar, LLC
Equipment Class:	PCS Licensed Transmitter
Notes:	Nyos LGA CDMA Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BC	22H	824.2  -  848.8	1.9498	2.5  PM	245KGXW
BC	22H	824.2  -  848.8	1.2023	2.5  PM	246KG7W
BC	22H	826.4  -  846.6	0.3837	2.5  PM	4M15F9W
BC	22H	824.7  -  848.31	0.26	2.5  PM	1M26F9W
BC	24E	1850.2  -  1909.8	0.912	2.5  PM	245KGXW
BC	24E	1850.2  -  1909.8	0.912	2.5  PM	245KG7W
BC	24E	1852.4  -  1907.6	0.3491	2.5  PM	4M16F9W
BC	24E	1851.25  -  1908.75	0.2143	2.5  PM	1M27F9W

Class II Permissive Change for use in Portable tablet configuration with collocation with WLAN and Bluetooth transmitters. Power out is conducted at the antenna terminal and utilizing the specific antenna as shown in applications under this FCC ID. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This C2PC adds the antenna information and adjusts the Peak Conducted Power on the Grant. OEM integrators must insure that the end user has no manual instructions to remove or install this module. Under no condition may an antenna gain be used that would exceed the 7 W ERP Part 22 and the 2W EIRP Part 24 power limits. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. The highest reported SAR values for Head, Body and Simultaneous Transmission Use condition are 0.43 W/kg, 0.79 W/kg and 1.11 W/kg, respectively.

BC:	The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

LevelStar, LLC 1500 Cherry St. Suite D Louisville, CO 80027 United States

Date of Grant: 08/24/2012 Application Dated: 08/24/2012

Attention: Matt Mulcahy

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	U48-RC002B
Name of Grantee:	LevelStar, LLC
Equipment Class:	PCS Licensed Transmitter
Notes:	Nyos LGA CDMA Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BC	22H	824.2  -  848.8	1.9498	2.5  PM	245KGXW
BC	22H	824.2  -  848.8	1.2023	2.5  PM	246KG7W
BC	22H	826.4  -  846.6	0.3837	2.5  PM	4M15F9W
BC	22H	824.7  -  848.31	0.26	2.5  PM	1M26F9W
BC	24E	1850.2  -  1909.8	0.912	2.5  PM	245KGXW
BC	24E	1850.2  -  1909.8	0.912	2.5  PM	245KG7W
BC	24E	1852.4  -  1907.6	0.3491	2.5  PM	4M16F9W
BC	24E	1851.25  -  1908.75	0.2143	2.5  PM	1M27F9W

Class II Permissive Change for use in Portable tablet configuration with collocation with WLAN and Bluetooth transmitters. Power out is conducted at the antenna terminal and utilizing the specific antenna as shown in applications under this FCC ID. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This C2PC adds the antenna information and adjusts the Peak Conducted Power on the Grant. OEM integrators must insure that the end user has no manual instructions to remove or install this module. Under no condition may an antenna gain be used that would exceed the 7 W ERP Part 22 and the 2W EIRP Part 24 power limits. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. The highest reported SAR values for Head, Body and Simultaneous Transmission Use condition are 0.43 W/kg, 0.79 W/kg and 1.11 W/kg, respectively.

BC:	The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To: