FCC ID U4A-MOD9134
Door Lock
by ASSA ABLOY Inc.
Grantee Code: U4A Product Code: MOD9134
Latest application date: 2023-06-08
FCC ID Device Details
| FCC ID | U4A-MOD9134 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | U4A |
| Product Code | MOD9134 |
| Applicant Business | ASSA ABLOY Inc. 🇺🇸 |
| Related Domains |  assaabloy.com |
| Equipment Class | Door Lock |
| Test Firm | Intertek Semko AB |
Linked Records
Barcode records decoded from published FCC label exhibits or linked by an explicit FCC ID reference on a product page.
| UPC / GTIN | Linked product |
|---|---|
| 001288455001 UPC-A · GTIN-14 00001288455001 | Door Lock MOD9134 Brand: ASSA ABLOY Inc. · Model: MOD9134 Source: FCC label |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2023-06-08 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-06-08 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-06-08 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: XF6-M7DB7 Grant Date: 07/27/2020 | 2023-03-28 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: XF6-M7DB7 Grant Date: 07/27/2020 | 2023-03-28 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: XF6-M7DB7 Grant Date: 07/27/2020 | 2023-03-28 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2023-06-08 | PDF 5.8 MB |
| Internal Photos | Internal Photos | 2023-06-08 | PDF 1.3 MB |
| External Photos | External Photos | 2023-06-08 | PDF 1.3 MB |
| External Photos | External Photos | 2023-03-28 | PDF 320.3 KB |
| Label Artwork and Location | ID Label/Location Info | 2023-06-08 | PDF 517.9 KB |
| Label Artwork and Location | ID Label/Location Info | 2023-03-28 | PDF 91.7 KB |
| Test Setup | Test Setup Photos | 2023-06-08 | PDF 338.3 KB |
| Test Report | Test Report | 2023-06-08 | PDF 3 MB |
| Attestation | Attestation Statements | 2023-06-08 | PDF 107.5 KB |
| C2PC Letter | Attestation Statements | 2023-06-08 | PDF 136.7 KB |
| C2PC Request Letter | Attestation Statements | 2023-06-08 | PDF 136.7 KB |
| Confidentiality Request | Cover Letter(s) | 2023-06-08 | PDF 58.6 KB |
| Letter of Agency | Cover Letter(s) | 2023-06-08 | PDF 118.5 KB |
| Authorisation Letter | Cover Letter(s) | 2023-03-28 | PDF 968.9 KB |
| Request for Change | Cover Letter(s) | 2023-03-28 | PDF 32.6 KB |
| RF Exposure | RF Exposure Info | 2023-06-08 | PDF 574.5 KB |
| Block Diagram Metadata only | Block Diagram | PDF 1.7 MB | |
| Circuit Diagram Metadata only | Schematics | PDF 3.2 MB | |
| Technical Description Metadata only | Operational Description | PDF 49.7 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 3.1 MB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 48.3 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 3.2 MB |
Application Information
| Application ID | P9CTCuLh+NcNhjZYC2ZLMg== |
|---|---|
| Final Action Date | 2023-06-08 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0016550824 |
| Model | MOD9134 |
| Frequency Range | 5745-5825 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Door Lock |
| Responsible Party | James Forte, Senior Product Compliance Engineer, jim.forte@assaabloy.com , 2038215788 |
| Agent | Andreas Andreas Andreas, Intertek Semko AB |
| Test Firm | Par Iggstrom, Intertek Semko AB, par.iggstrom@intertek.com  , +46708750026 |
| TCB Email | tcb_admin@intertek.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change for integration of the module into door lock and change in antenna. Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. This transmitter use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multitransmitter procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz, and 40 MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| P9CTCuLh+NcNhjZYC2ZLMg== | 2023-06-08 | Class II permissive change or modification of presently authorized equipment |
| KE2jngHPvOkdeZugPMakSQ== | 2023-06-08 | Class II permissive change or modification of presently authorized equipment |
| 9OFht7RyXivwiiqggOSiIQ== | 2023-06-08 | Class II permissive change or modification of presently authorized equipment |
| lxZLmWJap2A3JiBL0cXr6g== | 2023-03-28 | Change in identification of presently authorized equipment. Original FCC ID: XF6-M7DB7 Grant Date: 07/27/2020 |
| egAgLMXRbw8AbO/WwmGkPQ== | 2023-03-28 | Change in identification of presently authorized equipment. Original FCC ID: XF6-M7DB7 Grant Date: 07/27/2020 |
| YEUDOcfWr+hMlPIIbqC1Fg== | 2023-03-28 | Change in identification of presently authorized equipment. Original FCC ID: XF6-M7DB7 Grant Date: 07/27/2020 |
Equipment Authorization
Grants
TCB Grant - Application YEUDOcfWr+hMlPIIbqC1Fg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 |
Date of Grant: 03/28/2023 Application Dated: 03/28/2023 |
| ASSA ABLOY Inc. |
| 110 Sargent Drive, |
| P.O. Box PO Box 9725, |
| New Haven, CT 06511 |
| Attention: James Forte , Senior Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U4A-MOD9134 |
| Name of Grantee: | ASSA ABLOY Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Dual Band SIP Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.116 |
| Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. This transmitter use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multitransmitter procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application YEUDOcfWr+hMlPIIbqC1Fg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASSA ABLOY Inc. 110 Sargent Drive, PO Box 9725, New Haven, CT 06511 United States |
Date of Grant: 03/28/2023 Application Dated: 03/28/2023 |
| Attention: James Forte , Senior Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U4A-MOD9134 |
| Name of Grantee: | ASSA ABLOY Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Dual Band SIP Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.116 |
| Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. This transmitter use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multitransmitter procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 |
Date of Grant: 06/08/2023 Application Dated: 06/08/2023 |
| ASSA ABLOY Inc. |
| 110 Sargent Drive, |
| P.O. Box PO Box 9725, |
| New Haven, CT 06511 |
| Attention: James Forte , Senior Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U4A-MOD9134 |
| Name of Grantee: | ASSA ABLOY Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Door Lock |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.023 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.018 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.022 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.026 |
| Class II Permissive Change for integration of the module into door lock and change in antenna. Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. This transmitter use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multitransmitter procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz, and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application P9CTCuLh+NcNhjZYC2ZLMg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASSA ABLOY Inc. 110 Sargent Drive, PO Box 9725, New Haven, CT 06511 United States |
Date of Grant: 06/08/2023 Application Dated: 06/08/2023 |
| Attention: James Forte , Senior Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U4A-MOD9134 |
| Name of Grantee: | ASSA ABLOY Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Door Lock |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.023 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.018 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.022 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.026 |
| Class II Permissive Change for integration of the module into door lock and change in antenna. Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. This transmitter use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multitransmitter procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz, and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 |
Date of Grant: 03/28/2023 Application Dated: 03/28/2023 |
| ASSA ABLOY Inc. |
| 110 Sargent Drive, |
| P.O. Box PO Box 9725, |
| New Haven, CT 06511 |
| Attention: James Forte , Senior Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U4A-MOD9134 |
| Name of Grantee: | ASSA ABLOY Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Dual Band SIP Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.086 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.3 |
| Modular approval. Output power listed is peak conducted. This grant is valid only when the module is sold to OEM or OEM integrators. This transmitter use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz, and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application lxZLmWJap2A3JiBL0cXr6g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASSA ABLOY Inc. 110 Sargent Drive, PO Box 9725, New Haven, CT 06511 United States |
Date of Grant: 03/28/2023 Application Dated: 03/28/2023 |
| Attention: James Forte , Senior Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U4A-MOD9134 |
| Name of Grantee: | ASSA ABLOY Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Dual Band SIP Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.086 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.3 |
| Modular approval. Output power listed is peak conducted. This grant is valid only when the module is sold to OEM or OEM integrators. This transmitter use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz, and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 |
Date of Grant: 06/08/2023 Application Dated: 06/08/2023 |
| ASSA ABLOY Inc. |
| 110 Sargent Drive, |
| P.O. Box PO Box 9725, |
| New Haven, CT 06511 |
| Attention: James Forte , Senior Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U4A-MOD9134 |
| Name of Grantee: | ASSA ABLOY Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Door Lock |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.086 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.013 |
| Class II Permissive Change for integration of the module into door lock and change in antenna. Modular approval. Output power listed is peak conducted. This grant is valid only when the module is sold to OEM or OEM integrators. This transmitter use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz, and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application KE2jngHPvOkdeZugPMakSQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASSA ABLOY Inc. 110 Sargent Drive, PO Box 9725, New Haven, CT 06511 United States |
Date of Grant: 06/08/2023 Application Dated: 06/08/2023 |
| Attention: James Forte , Senior Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U4A-MOD9134 |
| Name of Grantee: | ASSA ABLOY Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Door Lock |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.086 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.013 |
| Class II Permissive Change for integration of the module into door lock and change in antenna. Modular approval. Output power listed is peak conducted. This grant is valid only when the module is sold to OEM or OEM integrators. This transmitter use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz, and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 |
Date of Grant: 03/28/2023 Application Dated: 03/28/2023 |
| ASSA ABLOY Inc. |
| 110 Sargent Drive, |
| P.O. Box PO Box 9725, |
| New Haven, CT 06511 |
| Attention: James Forte , Senior Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U4A-MOD9134 |
| Name of Grantee: | ASSA ABLOY Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Dual Band SIP Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.023 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.018 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.022 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.026 |
| Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. This transmitter use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multitransmitter procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz, and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application egAgLMXRbw8AbO/WwmGkPQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASSA ABLOY Inc. 110 Sargent Drive, PO Box 9725, New Haven, CT 06511 United States |
Date of Grant: 03/28/2023 Application Dated: 03/28/2023 |
| Attention: James Forte , Senior Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U4A-MOD9134 |
| Name of Grantee: | ASSA ABLOY Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Dual Band SIP Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.023 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.018 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.022 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.026 |
| Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. This transmitter use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multitransmitter procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz, and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 |
Date of Grant: 06/08/2023 Application Dated: 06/08/2023 |
| ASSA ABLOY Inc. |
| 110 Sargent Drive, |
| P.O. Box PO Box 9725, |
| New Haven, CT 06511 |
| Attention: James Forte , Senior Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U4A-MOD9134 |
| Name of Grantee: | ASSA ABLOY Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Door Lock |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.116 |
| Class II Permissive Change for integration of the module into door lock and change in antenna. Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. This transmitter use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multitransmitter procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 9OFht7RyXivwiiqggOSiIQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASSA ABLOY Inc. 110 Sargent Drive, PO Box 9725, New Haven, CT 06511 United States |
Date of Grant: 06/08/2023 Application Dated: 06/08/2023 |
| Attention: James Forte , Senior Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U4A-MOD9134 |
| Name of Grantee: | ASSA ABLOY Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Door Lock |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.116 |
| Class II Permissive Change for integration of the module into door lock and change in antenna. Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. This transmitter use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multitransmitter procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |