FCC ID U4A-MODBLE9118K
IN-DIKP
by ASSA ABLOY Inc.
Grantee Code: U4A Product Code: MODBLE9118K
Latest application date: 2019-10-03
FCC ID Device Details
| FCC ID | U4A-MODBLE9118K |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | U4A |
| Product Code | MODBLE9118K |
| Applicant Business | ASSA ABLOY Inc. 🇺🇸 |
| Related Domains |  assaabloy.com |
| Equipment Class | IN-DIKP |
| Test Firm | BUREAU VERITAS CONSUMER PRODUCTS SERVICES, INC. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 0.125 MHz | Original Equipment | 2019-10-03 |
| 13.56 MHz | Original Equipment | 2019-10-03 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual_and_Declaration_Page_BLE9118K_10_2_19.pdf | Users Manual | 2019-10-03 | PDF 1.8 MB |
| User Manual_and_Statement_10_08_19.pdf | Users Manual | 2019-10-03 | PDF 1.5 MB |
| Internal Photos.pdf | Internal Photos | 2019-10-03 | PDF 671.9 KB |
| External Photos.pdf | External Photos | 2019-10-03 | PDF 754.8 KB |
| ID LABEL Location_BLE9118K.pdf | ID Label/Location Info | 2019-10-03 | PDF 65.9 KB |
| ID_LABEL Sample_Proposal.pdf | ID Label/Location Info | 2019-10-03 | PDF 879.5 KB |
| Test Setup Photos - BLE9118K.pdf | Test Setup Photos | 2019-10-03 | PDF 789.9 KB |
| Test report_ET1639-3 FCC 15.209 Test Report 125kHz.pdf | Test Report | 2019-10-03 | PDF 1.7 MB |
| Test report_ET1639-4 FCC 15.225 Test Report 13.56MHz.pdf | Test Report | 2019-10-03 | PDF 1.9 MB |
| Confidentiality Request for FCC_BLE9118K Signed.pdf | Cover Letter(s) | 2019-10-03 | PDF 98.5 KB |
| Cover Letter_Agents Authorization Letter for FCC_BLE9118K Signed.pdf | Cover Letter(s) | 2019-10-03 | PDF 142.9 KB |
| Cover Letter_FCC Limited Modular Approval Request_BLE9118K Signed.pdf | Cover Letter(s) | 2019-10-03 | PDF 180 KB |
| RF Exposure Info (FCC) - BLE9118K rev1.pdf | RF Exposure Info | 2019-10-03 | PDF 107.7 KB |
| Block Diagram_BLE9118K.pdf Metadata only | Block Diagram | PDF 186.7 KB | |
| Schematic_BLE9118K_52-9118-0000-SCH-1.PDF Metadata only | Schematics | PDF 1.3 MB | |
| Schematic_HF_13.56MHz_FLEX_Antenna_Schematic_52-9114-0000-SCH-4.PDF Metadata only | Schematics | PDF 188.8 KB | |
| Schematic_LF_125kHz_Antenna_Coil_52-1868_1.pdf Metadata only | Schematics | PDF 87.9 KB | |
| Operational Description_BLE9118K.pdf Metadata only | Operational Description | PDF 125.7 KB |
Application Information
| Application ID | 9F+acGMNTvJkZHFphczkNA== |
|---|---|
| Final Action Date | 2019-10-03 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0016550824 |
| Model | MODBLE9118K |
| Frequency Range | 0.125 MHz |
| Equipment Class | DCD - Part 15 Low Power Transmitter Below 1705 kHz |
| Device Description | IN-DIKP |
| Responsible Party | James Forte, Senior Product Compliance Engineer, jim.forte@assaabloy.com , 2038215788 |
| Agent | Yunus Yunus Yunus, Bureau Veritas Consumer Products Services, Inc, yunus.fazilolglu@us.bureauveritas.com  , 9784868880 |
| Test Firm | Dori Robertson, BUREAU VERITAS CONSUMER PRODUCTS SERVICES, INC., dolores.robertson@us.bureauveritas.com , 978 486 8880 |
| TCB Email | tcb@us.bureauveritas.com |
| TCB Scope | A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited single modular approval. This grant is valid only when the module is installed in the end products of the grantee under their control as explained in this filing. Marketing this module to 3rd parties and the general public is prohibited. Grantee must ensure that the end user has no instructions to remove or install this module. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Installers must be provided with antenna installation instructions and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance requirements. Only the antenna(s) listed in this filing can be used with this module. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 9F+acGMNTvJkZHFphczkNA== | 2019-10-03 | Original Equipment |
| 3j2eiVw1S716K2TS7J6jow== | 2019-10-03 | Original Equipment |
Grants
TCB Grant - Application 9F+acGMNTvJkZHFphczkNA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 10/03/2019 Application Dated: 10/03/2019 |
| ASSA ABLOY Inc. |
| 110 Sargent Drive, |
| P.O. Box PO Box 9725, |
| New Haven, CT 06511 |
| Attention: James Forte , Senior Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U4A-MODBLE9118K |
| Name of Grantee: | ASSA ABLOY Inc. |
| Equipment Class: | Part 15 Low Power Transmitter Below 1705 kHz |
| Notes: | IN-DIKP |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 0.125 - 0.125 |
| Limited single modular approval. This grant is valid only when the module is installed in the end products of the grantee under their control as explained in this filing. Marketing this module to 3rd parties and the general public is prohibited. Grantee must ensure that the end user has no instructions to remove or install this module. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Installers must be provided with antenna installation instructions and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance requirements. Only the antenna(s) listed in this filing can be used with this module. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 9F+acGMNTvJkZHFphczkNA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASSA ABLOY Inc. 110 Sargent Drive, PO Box 9725, New Haven, CT 06511 United States |
Date of Grant: 10/03/2019 Application Dated: 10/03/2019 |
| Attention: James Forte , Senior Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U4A-MODBLE9118K |
| Name of Grantee: | ASSA ABLOY Inc. |
| Equipment Class: | Part 15 Low Power Transmitter Below 1705 kHz |
| Notes: | IN-DIKP |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 0.125 - 0.125 |
| Limited single modular approval. This grant is valid only when the module is installed in the end products of the grantee under their control as explained in this filing. Marketing this module to 3rd parties and the general public is prohibited. Grantee must ensure that the end user has no instructions to remove or install this module. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Installers must be provided with antenna installation instructions and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance requirements. Only the antenna(s) listed in this filing can be used with this module. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 10/03/2019 Application Dated: 10/03/2019 |
| ASSA ABLOY Inc. |
| 110 Sargent Drive, |
| P.O. Box PO Box 9725, |
| New Haven, CT 06511 |
| Attention: James Forte , Senior Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U4A-MODBLE9118K |
| Name of Grantee: | ASSA ABLOY Inc. |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | IN-DIKP |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 13.56 - 13.56 |
| Limited single modular approval. This grant is valid only when the module is installed in the end products of the grantee under their control as explained in this filing. Marketing this module to 3rd parties and the general public is prohibited. Grantee must ensure that the end user has no instructions to remove or install this module. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Installers must be provided with antenna installation instructions and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance requirements. Only the antenna(s) listed in this filing can be used with this module. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 3j2eiVw1S716K2TS7J6jow==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASSA ABLOY Inc. 110 Sargent Drive, PO Box 9725, New Haven, CT 06511 United States |
Date of Grant: 10/03/2019 Application Dated: 10/03/2019 |
| Attention: James Forte , Senior Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U4A-MODBLE9118K |
| Name of Grantee: | ASSA ABLOY Inc. |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | IN-DIKP |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 13.56 - 13.56 |
| Limited single modular approval. This grant is valid only when the module is installed in the end products of the grantee under their control as explained in this filing. Marketing this module to 3rd parties and the general public is prohibited. Grantee must ensure that the end user has no instructions to remove or install this module. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Installers must be provided with antenna installation instructions and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance requirements. Only the antenna(s) listed in this filing can be used with this module. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |