FCC ID U4A-YRBDGCB2
Communication Bridge for Home Automation Devices
by ASSA ABLOY Inc.
Grantee Code: U4A Product Code: YRBDGCB2
Latest application date: 2021-03-17
FCC ID Device Details
| FCC ID | U4A-YRBDGCB2 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | U4A |
| Product Code | YRBDGCB2 |
| Applicant Business | ASSA ABLOY Inc. 🇺🇸 |
| Related Domains |  assaabloy.com |
| Equipment Class | Communication Bridge for Home Automation Devices |
| Test Firm | VPI Laboratories, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Original Equipment | 2021-03-17 |
| 2402-2480 MHz | Original Equipment | 2021-03-17 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2021-03-17 | PDF 142.1 KB |
| User Manual Setup 1 | Users Manual | 2021-03-17 | PDF 1 MB |
| User Manual Setup 2 | Users Manual | 2021-03-17 | PDF 1.7 MB |
| Users Manual | Users Manual | 2021-03-17 | PDF 142.1 KB |
| Internal Photos | Internal Photos | 2021-03-17 | PDF 182.5 KB |
| External Photos | External Photos | 2021-03-17 | PDF 174.3 KB |
| Label Location | ID Label/Location Info | 2021-03-17 | PDF 31.5 KB |
| Label Sample | ID Label/Location Info | 2021-03-17 | PDF 104.8 KB |
| Test Setup Photos | Test Setup Photos | 2021-03-17 | PDF 387.8 KB |
| Test Report DFS | Test Report | 2021-03-17 | PDF 489.6 KB |
| Test Report SubC BLE | Test Report | 2021-03-17 | PDF 1.4 MB |
| Test Report SubC WiFi | Test Report | 2021-03-17 | PDF 2.1 MB |
| Test Report SubE UNII - 1 | Test Report | 2021-03-17 | PDF 1.5 MB |
| Test Report SubE UNII - 2 | Test Report | 2021-03-17 | PDF 1.7 MB |
| Test Report SubE UNII - 3 | Test Report | 2021-03-17 | PDF 1.5 MB |
| Confidentiality Letter | Cover Letter(s) | 2021-03-17 | PDF 52.5 KB |
| POA Letter | Cover Letter(s) | 2021-03-17 | PDF 73 KB |
| MPE Report | RF Exposure Info | 2021-03-17 | PDF 94.7 KB |
| Block Diagram Metadata only | Block Diagram | PDF 53.5 KB | |
| Schematics Metadata only | Schematics | PDF 2 MB | |
| Operational Description Metadata only | Operational Description | PDF 41.7 KB | |
| SW Security Op Desc Metadata only | SDR Software/Security Inf | PDF 238.1 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 41.6 KB |
Application Information
| Application ID | qBBVZ4MjOjVQDdwUJ2Dccg== |
|---|---|
| Final Action Date | 2021-03-17 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0016550824 |
| Model | YRBDGCB2 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Communication Bridge for Home Automation Devices |
| Responsible Party | James Forte, Senior Product Compliance Engineer, jim.forte@assaabloy.com , 2038215788 |
| Test Firm | Jason Stewart, VPI Laboratories, Inc., jasons@vpimfg.com  , 801-495-2310 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is maximum power conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| qBBVZ4MjOjVQDdwUJ2Dccg== | 2021-03-17 | Original Equipment |
| Pcx2Hty9zQbaKA6Urxgj4A== | 2021-03-17 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application qBBVZ4MjOjVQDdwUJ2Dccg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/17/2021 Application Dated: 03/17/2021 |
| ASSA ABLOY Inc. |
| 110 Sargent Drive, |
| P.O. Box PO Box 9725, |
| New Haven, CT 06511 |
| Attention: James Forte , Senior Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U4A-YRBDGCB2 |
| Name of Grantee: | ASSA ABLOY Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Communication Bridge for Home Automation Devices |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.063 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0339 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.0708 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.1047 |
| Power listed is maximum power conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application qBBVZ4MjOjVQDdwUJ2Dccg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASSA ABLOY Inc. 110 Sargent Drive, PO Box 9725, New Haven, CT 06511 United States |
Date of Grant: 03/17/2021 Application Dated: 03/17/2021 |
| Attention: James Forte , Senior Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U4A-YRBDGCB2 |
| Name of Grantee: | ASSA ABLOY Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Communication Bridge for Home Automation Devices |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.063 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0339 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.0708 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.1047 |
| Power listed is maximum power conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/17/2021 Application Dated: 03/17/2021 |
| ASSA ABLOY Inc. |
| 110 Sargent Drive, |
| P.O. Box PO Box 9725, |
| New Haven, CT 06511 |
| Attention: James Forte , Senior Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U4A-YRBDGCB2 |
| Name of Grantee: | ASSA ABLOY Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Bridge for Home Automation Devices |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.02051 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0032 |
| Power listed is maximum power conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Pcx2Hty9zQbaKA6Urxgj4A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASSA ABLOY Inc. 110 Sargent Drive, PO Box 9725, New Haven, CT 06511 United States |
Date of Grant: 03/17/2021 Application Dated: 03/17/2021 |
| Attention: James Forte , Senior Product Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U4A-YRBDGCB2 |
| Name of Grantee: | ASSA ABLOY Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication Bridge for Home Automation Devices |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.02051 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0032 |
| Power listed is maximum power conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |