FCC ID U4A-YRHCPZB0
Yale Real Living Electronic Zigbee Lock
by ASSA ABLOY Inc.
Grantee Code: U4A Product Code: YRHCPZB0
Latest application date: 2012-02-22
FCC ID Device Details
| FCC ID | U4A-YRHCPZB0 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | U4A |
| Product Code | YRHCPZB0 |
| Applicant Business | ASSA ABLOY Inc. 🇺🇸 |
| Related Domains |  assaabloyusa.com |
| Equipment Class | Yale Real Living Electronic Zigbee Lock |
| Test Firm | Advanced Compliance Solutions, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2405-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2012-02-22 |
| 2405-2480 MHz | Original Equipment | 2011-05-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual - YRD210-ZB | Users Manual | 2012-02-22 | PDF 3.6 MB |
| Manual - YRD220-ZB | Users Manual | 2012-02-22 | PDF 2.9 MB |
| Manual - YRT210-ZB | Users Manual | 2012-02-22 | PDF 4.7 MB |
| Manual - YRT220-ZB | Users Manual | 2012-02-22 | PDF 3.5 MB |
| User Manual | Users Manual | 2011-05-20 | PDF 2.6 MB |
| Internal Photos | Internal Photos | 2012-02-22 | PDF 1.1 MB |
| Internal Photos | Internal Photos | 2011-05-20 | PDF 753.1 KB |
| External Photos | External Photos | 2012-02-22 | PDF 662.4 KB |
| External Photos | External Photos | 2011-05-20 | PDF 216 KB |
| Label Information | ID Label/Location Info | 2012-02-22 | PDF 166.9 KB |
| Label and Location | ID Label/Location Info | 2011-05-20 | PDF 148.7 KB |
| Test Setup Photos | Test Setup Photos | 2012-02-22 | PDF 2.7 MB |
| Test Setup Photos | Test Setup Photos | 2011-05-20 | PDF 388.2 KB |
| Test Report | Test Report | 2012-02-22 | PDF 83.7 KB |
| Test Report | Test Report | 2011-05-20 | PDF 665 KB |
| Agency Agreement | Cover Letter(s) | 2012-02-22 | PDF 18.3 KB |
| Confidentiality Request | Cover Letter(s) | 2012-02-22 | PDF 18 KB |
| FCC Cover Letter | Cover Letter(s) | 2012-02-22 | PDF 17.5 KB |
| Authorization Letter | Cover Letter(s) | 2011-05-20 | PDF 17.9 KB |
| Confidentiality Letter | Cover Letter(s) | 2011-05-20 | PDF 17.9 KB |
| RF Exposure | RF Exposure Info | 2012-02-22 | PDF 25.3 KB |
| RF Exposure MPE | RF Exposure Info | 2011-05-20 | PDF 22.9 KB |
Application Information
| Application ID | eY1158vokICzUwbeFE8Yww== |
|---|---|
| Final Action Date | 2012-02-22 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0016550824 |
| Model | -YRHCPZB0 |
| Frequency Range | 2405-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Yale Real Living Electronic Zigbee Lock |
| Responsible Party | Steven Pfalzgraf, Electromechanical Applications Engineer, spfalzgraf@assaabloyusa.com , 203 821 5714 |
| Agent | Sam Sam Sam, Advanced Compliance Solutions, Inc., swismer@acstestlab.com  , 770) 831-8048 |
| Test Firm | Randy Abernathy, Advanced Compliance Solutions, Inc., rabernathy@acstestlab.com , 770-831-8048 |
| TCB Email | jwoods@acstestlab.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output is EIRP. The antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change to add new antenna type and new model variants. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| eY1158vokICzUwbeFE8Yww== | 2012-02-22 | Class II permissive change or modification of presently authorized equipment |
| bmyZpCOTxDQQIWGFTvX9UQ== | 2011-05-20 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2405-2480 MHz | 0.0004645 | 15C |
Grants
TCB Grant - Application eY1158vokICzUwbeFE8Yww==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 02/22/2012 Application Dated: 02/22/2012 |
| ASSA ABLOY Inc. |
| 110 Sargent Drive, |
| P.O. Box PO Box 9725, |
| New Haven, CT 06511 |
| Attention: Steven Pfalzgraf , Electromechanical Applications Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U4A-YRHCPZB0 |
| Name of Grantee: | ASSA ABLOY Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Yale Real Living Electronic Zigbee Lock |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.0004645 |
| Power Output is EIRP. The antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change to add new antenna type and new model variants. |
EAS Grant - Application eY1158vokICzUwbeFE8Yww==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASSA ABLOY Inc. 110 Sargent Drive, PO Box 9725, New Haven, CT 06511 United States |
Date of Grant: 02/22/2012 Application Dated: 02/22/2012 |
| Attention: Steven Pfalzgraf , Electromechanical Applications Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U4A-YRHCPZB0 |
| Name of Grantee: | ASSA ABLOY Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Yale Real Living Electronic Zigbee Lock |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.0004645 |
| Power Output is EIRP. The antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change to add new antenna type and new model variants. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/20/2011 Application Dated: 05/19/2011 |
| ASSA ABLOY Inc. |
| 110 Sargent Drive, |
| P.O. Box PO Box 9725, |
| New Haven, CT 06511 |
| Attention: Steven Pfalzgraf , Electromechanical Applications Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U4A-YRHCPZB0 |
| Name of Grantee: | ASSA ABLOY Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Yale Real Living Electronic Zigbee Lock |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.0004645 |
| Power Output is EIRP. The antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application bmyZpCOTxDQQIWGFTvX9UQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASSA ABLOY Inc. 110 Sargent Drive, PO Box 9725, New Haven, CT 06511 United States |
Date of Grant: 05/20/2011 Application Dated: 05/19/2011 |
| Attention: Steven Pfalzgraf , Electromechanical Applications Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U4A-YRHCPZB0 |
| Name of Grantee: | ASSA ABLOY Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Yale Real Living Electronic Zigbee Lock |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.0004645 |
| Power Output is EIRP. The antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |