1. FCC ID
  2. U4Y
  3. U4Y-SE1I2

FCC ID U4Y-SE1I2

Industrial Access Point

by LANCOM Systems GmbH

Grantee Code: U4Y   Product Code: SE1I2
Latest application date: 2007-05-23

FCC ID Device Details

FCC IDU4Y-SE1I2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeU4Y
Product CodeSE1I2
Applicant BusinessLANCOM Systems GmbH 🇩🇪
Related Domains lancom.de
Equipment ClassIndustrial Access Point
Test FirmCETECOM ICT Services GmbH

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2007-05-23
5180-5240 MHzOriginal Equipment2007-05-23

Exhibits

DocumentTypeAvailableFile
Installation InstructionsUsers Manual2007-05-23PDF 78.3 KB
Internal PhotosInternal Photos2007-05-23PDF 2 MB
External PhotosExternal Photos2007-05-23PDF 1.2 MB
ID Label and Location InfoID Label/Location Info2007-05-23PDF 154.4 KB
Test Setup PhotosTest Setup Photos2007-05-23PDF 909.5 KB
Test ReportTest Report2007-05-23PDF 1.9 MB
Test Report 2400 MHzTest Report2007-05-23PDF 2.4 MB
Test Report 5800 MHzTest Report2007-05-23PDF 1.8 MB
Test Report Antenna 1Test Report2007-05-23PDF 744.3 KB
Test Report Antenna 10Test Report2007-05-23PDF 1 MB
Test Report Antenna 11 5GTest Report2007-05-23PDF 656 KB
Test Report Antenna 12 5GTest Report2007-05-23PDF 995.2 KB
Test Report Antenna 13Test Report2007-05-23PDF 1,010.5 KB
Test Report Antenna 14Test Report2007-05-23PDF 872.3 KB
Test Report Antenna 14 5GTest Report2007-05-23PDF 935 KB
Test Report Antenna 15Test Report2007-05-23PDF 1.1 MB
Test Report Antenna 15 5GTest Report2007-05-23PDF 1.2 MB
Test Report Antenna 16Test Report2007-05-23PDF 1.3 MB
Test Report Antenna 17 5GTest Report2007-05-23PDF 1.3 MB
Test Report Antenna 18Test Report2007-05-23PDF 1,023.7 KB
Test Report Antenna 19Test Report2007-05-23PDF 1.3 MB
Test Report Antenna 2 5GTest Report2007-05-23PDF 789.4 KB
Test Report Antenna 3 and 4Test Report2007-05-23PDF 1.2 MB
Test Report Antenna 5Test Report2007-05-23PDF 752.2 KB
Test Report Antenna 6 5GTest Report2007-05-23PDF 780.9 KB
Test Report Antenna 7 5GTest Report2007-05-23PDF 717.2 KB
Test Report Antenna 8 5GTest Report2007-05-23PDF 739.8 KB
Test Report Antenna 9Test Report2007-05-23PDF 1 MB
Test Report Antenna 9 5GTest Report2007-05-23PDF 1.1 MB
Confidentiality Request LetterCover Letter(s)2007-05-23PDF 17 KB
Confidentility Request LetterCover Letter(s)2007-05-23PDF 17 KB
RF Exposure InfoRF Exposure Info2007-05-23PDF 35.3 KB

Application Information

Application IDCvkfTEb7PcIHmBIRYNbVRg==
Final Action Date2007-05-23
Application PurposeOriginal Equipment
Applicant FRN0016193682
Model-SE1I2
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionIndustrial Access Point
Responsible PartyAndre Krautschick, andre.krautschick@lancom.de , +49240549936443
Test FirmGerald Schmidt, CETECOM ICT Services GmbH, tcb@cetecom.com , 49-681-598-0
TCB EmailGerald.Schmidt@ict.cetecom.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsThis device must be professionally installed. Power Output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
CvkfTEb7PcIHmBIRYNbVRg==2007-05-23Original Equipment
1+fpzft0IyT1mLmANBn4UA==2007-05-23Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.415C36, CC
5180-5240 MHz0.013000015E36, CC
5745-5825 MHz0.09615C36, CC

Grants

TCB Grant - Application CvkfTEb7PcIHmBIRYNbVRg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION 		TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany 		Date of Grant: 05/23/2007

Application Dated: 05/23/2007
LANCOM Systems GmbH
Adenauerstr. 20/B2
Wuerselen, 52146
Germany
 
Attention: Andre Krautschick

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U4Y-SE1I2
Name of Grantee:  LANCOM Systems GmbH
Equipment Class: Digital Transmission System
Notes: Industrial Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
36 CC 15C 2412.0  -  2462.0 0.4  
36 CC 15C 5745.0  -  5825.0 0.096  

This device must be professionally installed.

Power Output listed is conducted.

The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application CvkfTEb7PcIHmBIRYNbVRg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION 		COPY
Certification

LANCOM Systems GmbH
Adenauerstr. 20/B2
Wuerselen, 52146
Germany 		  Date of Grant: 05/23/2007

Application Dated: 05/23/2007
 
Attention: Andre Krautschick

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U4Y-SE1I2
Name of Grantee:  LANCOM Systems GmbH
Equipment Class: Digital Transmission System
Notes: Industrial Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
36 CC 15C 2412.0  -  2462.0 0.4  
36 CC 15C 5745.0  -  5825.0 0.096  

This device must be professionally installed.

Power Output listed is conducted.

The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA879846

TCB Grant - Application 1+fpzft0IyT1mLmANBn4UA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION 		TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany 		Date of Grant: 05/23/2007

Application Dated: 05/23/2007
LANCOM Systems GmbH
Adenauerstr. 20/B2
Wuerselen, 52146
Germany
 
Attention: Andre Krautschick

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U4Y-SE1I2
Name of Grantee:  LANCOM Systems GmbH
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Industrial Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
36 CC 15E 5180.0  -  5240.0 0.013  

This device must be professionally installed.

Power Output listed is conducted.

Operations in the 5.15-5.25 GHz band are restricted to indoor-only use.

The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 1+fpzft0IyT1mLmANBn4UA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION 		COPY
Certification

LANCOM Systems GmbH
Adenauerstr. 20/B2
Wuerselen, 52146
Germany 		  Date of Grant: 05/23/2007

Application Dated: 05/23/2007
 
Attention: Andre Krautschick

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U4Y-SE1I2
Name of Grantee:  LANCOM Systems GmbH
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Industrial Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
36 CC 15E 5180.0  -  5240.0 0.013  

This device must be professionally installed.

Power Output listed is conducted.

Operations in the 5.15-5.25 GHz band are restricted to indoor-only use.

The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA332405