FCC ID U5X-RE703

Doorbell Camera

by Resolution Products, Inc.

Grantee Code: U5X   Product Code: RE703
Latest application date: 2019-03-27

FCC ID Device Details

FCC IDU5X-RE703
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeU5X
Product CodeRE703
Applicant BusinessResolution Products, Inc. 🇺🇸
Related Domains resolutionproducts.com
Equipment ClassDoorbell Camera
Test FirmSGS-CSTC Standards Technical Services Co.,Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: 2APV2-CSDB1 Grant Date: 11/14/20182019-03-27
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: 2APV2-CSDB1 Grant Date: 11/14/20182019-03-27

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2019-03-27PDF 1.7 MB
External PhotosExternal Photos2019-03-27PDF 454.9 KB
LabelID Label/Location Info2019-03-27PDF 225.3 KB
Authority LetterCover Letter(s)2019-03-27PDF 20.2 KB
Cover letterCover Letter(s)2019-03-27PDF 159.2 KB

Application Information

Application ID4BUf6PT0p7hJ60WU4WzVeQ==
Final Action Date2019-03-27
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: 2APV2-CSDB1 Grant Date: 11/14/2018
Applicant FRN0019089671
ModelRE703
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionDoorbell Camera
Responsible PartyPaul Saldin, Vice President, paul.saldin@resolutionproducts.com , 651-269-2172
Test FirmLola Yuan, SGS-CSTC Standards Technical Services Co.,Ltd., lola_yuan@sgs.com , +86 (0)21 6191 5609
TCB EmailUSCTS.TCB@SGS.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is conducted. This device is a client only device, enabled for either 2.4 or 5 GHz band operations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40MHz bandwidth mode.

Applications

Application IDDatePurpose
4BUf6PT0p7hJ60WU4WzVeQ==2019-03-27Change in identification of presently authorized equipment. Original FCC ID: 2APV2-CSDB1 Grant Date: 11/14/2018
0dQrzOGr4zB7BsupZyFUVA==2019-03-27Change in identification of presently authorized equipment. Original FCC ID: 2APV2-CSDB1 Grant Date: 11/14/2018

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.04115CCC
2422-2452 MHz0.02915CCC
5190-5230 MHz0.02315ECC
5210 MHz0.0115ECC
5260-5320 MHz0.03115ECC, ND
5270-5310 MHz0.02515ECC, ND
5290 MHz0.02815ECC, ND
5500-5700 MHz0.02915ECC, ND
5510-5670 MHz0.02115ECC, ND
5530-5610 MHz0.0215ECC, ND
5745-5825 MHz0.02515ECC
5755-5795 MHz0.0215ECC
5775 MHz0.0115ECC

Grants

TCB Grant - Application 4BUf6PT0p7hJ60WU4WzVeQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 03/27/2019

Application Dated: 03/27/2019
Resolution Products, Inc.
226 Locust Street
Hudson, WI 54016
 
Attention: Paul Saldin , Vice President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U5X-RE703
Name of Grantee:  Resolution Products, Inc.
Equipment Class: Digital Transmission System
Notes: Doorbell Camera
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.041  
CC 15C 2422.0  -  2452.0 0.029  

Power Output listed is conducted. This device is a client only device, enabled for either 2.4 or 5 GHz band operations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40MHz bandwidth mode.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 4BUf6PT0p7hJ60WU4WzVeQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Resolution Products, Inc.
226 Locust Street
Hudson, WI 54016
United States
  Date of Grant: 03/27/2019

Application Dated: 03/27/2019
 
Attention: Paul Saldin , Vice President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U5X-RE703
Name of Grantee:  Resolution Products, Inc.
Equipment Class: Digital Transmission System
Notes: Doorbell Camera
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.041  
CC 15C 2422.0  -  2452.0 0.029  

Power Output listed is conducted. This device is a client only device, enabled for either 2.4 or 5 GHz band operations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 0dQrzOGr4zB7BsupZyFUVA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 03/27/2019

Application Dated: 03/27/2019
Resolution Products, Inc.
226 Locust Street
Hudson, WI 54016
 
Attention: Paul Saldin , Vice President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U5X-RE703
Name of Grantee:  Resolution Products, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Doorbell Camera
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.035  
CC 15E 5190.0  -  5230.0 0.023  
CC 15E 5210.0  -  5210.0 0.01  
CC ND 15E 5260.0  -  5320.0 0.031  
CC ND 15E 5270.0  -  5310.0 0.025  
CC ND 15E 5290.0  -  5290.0 0.028  
CC ND 15E 5500.0  -  5700.0 0.029  
CC ND 15E 5510.0  -  5670.0 0.021  
CC ND 15E 5530.0  -  5610.0 0.02  
CC 15E 5745.0  -  5825.0 0.025  
CC 15E 5755.0  -  5795.0 0.02  
CC 15E 5775.0  -  5775.0 0.01  

Power Output listed is conducted. This device is a client only device, enabled for either 2.4 or 5 GHz band operations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40 MHz and 80MHz bandwidth mode.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application 0dQrzOGr4zB7BsupZyFUVA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Resolution Products, Inc.
226 Locust Street
Hudson, WI 54016
United States
  Date of Grant: 03/27/2019

Application Dated: 03/27/2019
 
Attention: Paul Saldin , Vice President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U5X-RE703
Name of Grantee:  Resolution Products, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Doorbell Camera
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.035  
CC 15E 5190.0  -  5230.0 0.023  
CC 15E 5210.0  -  5210.0 0.01  
CC ND 15E 5260.0  -  5320.0 0.031  
CC ND 15E 5270.0  -  5310.0 0.025  
CC ND 15E 5290.0  -  5290.0 0.028  
CC ND 15E 5500.0  -  5700.0 0.029  
CC ND 15E 5510.0  -  5670.0 0.021  
CC ND 15E 5530.0  -  5610.0 0.02  
CC 15E 5745.0  -  5825.0 0.025  
CC 15E 5755.0  -  5795.0 0.02  
CC 15E 5775.0  -  5775.0 0.01  

Power Output listed is conducted. This device is a client only device, enabled for either 2.4 or 5 GHz band operations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40 MHz and 80MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: