FCC ID U6IH3CEWTO235A22W

WIRELESS LAN ACCESS POINT

by Hangzhou H3C Technologies Co., Ltd

Grantee Code: U6I   Product Code: H3CEWTO235A22W
Latest application date: 2009-09-04

FCC ID Device Details

FCC IDU6IH3CEWTO235A22W
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeU6I
Product CodeH3CEWTO235A22W
Applicant BusinessHangzhou H3C Technologies Co., Ltd 🇨🇳
Related Domains h3c.com
Equipment ClassWIRELESS LAN ACCESS POINT
Test FirmIntertek Testing Services Limited Shanghai

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2009-09-04
2412-2462 MHzOriginal Equipment2007-12-12
5150-5250 MHzOriginal Equipment2007-12-12

Exhibits

DocumentTypeAvailableFile
USERS MANUALUsers Manual2007-12-12PDF 1 MB
INTERNAL PHOTOSInternal Photos2007-12-12PDF 568.5 KB
EXTERNAL PHOTOSExternal Photos2007-12-12PDF 505.2 KB
LABEL INFOID Label/Location Info2007-12-12PDF 1.3 MB
Test Setup PhotosTest Setup Photos2009-09-04PDF 322.9 KB
TEST SETUP PHOTOSTest Setup Photos2007-12-12PDF 189.6 KB
Test ReportTest Report2009-09-04PDF 1.9 MB
TEST REPORTTest Report2007-12-12PDF 699.7 KB
TEST REPORTTest Report2007-12-12PDF 1.9 MB
Difference DescriptionCover Letter(s)2009-09-04PDF 26.9 KB
CONFIDENTIAL LETTERCover Letter(s)2007-12-12PDF 20.6 KB
COVER LETTERCover Letter(s)2007-12-12PDF 13.8 KB
Maximum ExposureRF Exposure Info2009-09-04PDF 80.5 KB
RF EXPOSURERF Exposure Info2007-12-12PDF 107 KB
RF EXPOSURERF Exposure Info2007-12-12PDF 108 KB
TUNE UP INFOParts List/Tune Up Info2007-12-12PDF 932.5 KB

Application Information

Application IDlKl3sv9MhkyGk5VoaMDFOw==
Final Action Date2009-09-04
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0016270928
ModelH3CEWTO235A22W
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWIRELESS LAN ACCESS POINT
Responsible PartySun Li, Regulatory Compliance Manager, sli@h3c.com , +86 (10) 8277-4654
Test FirmJonny Jing, Intertek Testing Services Limited Shanghai, jonny.jing@intertek.com , 86-21-61278271
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Original Grant: 12/12/2007) Class II Change: This Class II Change adds additional frequencies.

Applications

Application IDDatePurpose
lKl3sv9MhkyGk5VoaMDFOw==2009-09-04Class II permissive change or modification of presently authorized equipment
xdtFiu2FtjQTglU5Wjhahw==2007-12-12Original Equipment
JvL1LfJL0IWYUKgqhTxqHw==2007-12-12Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.17415CCC
2412-2462 MHz0.174000015CCC
5150-5250 MHz0.037000015ECC
5745-5825 MHz0.11915CCC

Grants

TCB Grant - Application xdtFiu2FtjQTglU5Wjhahw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 12/12/2007

Application Dated: 12/11/2007
Hangzhou H3C Technologies Co., Ltd
310 Liuhe Road,
Zhijiang Science Park, Hangzhou 310053, P.R.China,
China
 
Attention: Sun Li , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U6IH3CEWTO235A22W
Name of Grantee:  Hangzhou H3C Technologies Co., Ltd
Equipment Class: Digital Transmission System
Notes: WIRELESS LAN ACCESS POINT
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.174  

Power listed is conducted.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application xdtFiu2FtjQTglU5Wjhahw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hangzhou H3C Technologies Co., Ltd
310 Liuhe Road,
Zhijiang Science Park, Hangzhou 310053, P.R.China,
China
  Date of Grant: 12/12/2007

Application Dated: 12/11/2007
 
Attention: Sun Li , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U6IH3CEWTO235A22W
Name of Grantee:  Hangzhou H3C Technologies Co., Ltd
Equipment Class: Digital Transmission System
Notes: WIRELESS LAN ACCESS POINT
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.174  

Power listed is conducted.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application lKl3sv9MhkyGk5VoaMDFOw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 09/04/2009

Application Dated: 09/03/2009
Hangzhou H3C Technologies Co., Ltd
310 Liuhe Road,
Zhijiang Science Park, Hangzhou 310053, P.R.China,
China
 
Attention: Sun Li , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U6IH3CEWTO235A22W
Name of Grantee:  Hangzhou H3C Technologies Co., Ltd
Equipment Class: Digital Transmission System
Notes: WIRELESS LAN ACCESS POINT
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.174  
CC 15C 5745.0  -  5825.0 0.119  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Original Grant: 12/12/2007)

Class II Change: This Class II Change adds additional frequencies.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application lKl3sv9MhkyGk5VoaMDFOw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hangzhou H3C Technologies Co., Ltd
310 Liuhe Road,
Zhijiang Science Park, Hangzhou 310053, P.R.China,
China
  Date of Grant: 09/04/2009

Application Dated: 09/03/2009
 
Attention: Sun Li , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U6IH3CEWTO235A22W
Name of Grantee:  Hangzhou H3C Technologies Co., Ltd
Equipment Class: Digital Transmission System
Notes: WIRELESS LAN ACCESS POINT
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.174  
CC 15C 5745.0  -  5825.0 0.119  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Original Grant: 12/12/2007)

Class II Change: This Class II Change adds additional frequencies.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application JvL1LfJL0IWYUKgqhTxqHw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 12/12/2007

Application Dated: 12/11/2007
Hangzhou H3C Technologies Co., Ltd
310 Liuhe Road,
Zhijiang Science Park, Hangzhou 310053, P.R.China,
China
 
Attention: Sun Li , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U6IH3CEWTO235A22W
Name of Grantee:  Hangzhou H3C Technologies Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WIRELESS LAN ACCESS POINT
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5150.0  -  5250.0 0.037  

Power listed is conducted. Operation in the band 5.15-5.25GHz is restricted to indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application JvL1LfJL0IWYUKgqhTxqHw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hangzhou H3C Technologies Co., Ltd
310 Liuhe Road,
Zhijiang Science Park, Hangzhou 310053, P.R.China,
China
  Date of Grant: 12/12/2007

Application Dated: 12/11/2007
 
Attention: Sun Li , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U6IH3CEWTO235A22W
Name of Grantee:  Hangzhou H3C Technologies Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WIRELESS LAN ACCESS POINT
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5150.0  -  5250.0 0.037  

Power listed is conducted. Operation in the band 5.15-5.25GHz is restricted to indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: