M120000015 IEEE 802.11A/B/G/N/AC DUAL 3T3R WIFI PCIE Test Report _NII Panasonic Avionics Corporation

Panasonic Avionics Corporation IEEE 802.11A/B/G/N/AC DUAL 3T3R WIFI PCIE

FCC ID Filing: U6Y-M120000015
Purchase on Amazon: IEEE 802.11A/B/G/N/AC DUAL 3T3R WIFI PCIE

Trouble Viewing? See the or view the HTML Version or PDF in frame
Page 1 of M120000015 IEEE 802.11A/B/G/N/AC DUAL 3T3R WIFI PCIE Test Report _NII Panasonic Avionics Corporation

FCC Test Report
FCC ID
: U6Y-M120000015
Equipment
: IEEE 802.11A/B/G/N/AC DUAL 3T3R WIFI PCIE
Model No.
: M120000015
Brand Name
: Panasonic
Applicant
: Panasonic Avionics Corporation
Address
: 26200 ENTERPRISE WAY, LAKE FOREST, CA
92630-8400 USA
Standard
: 47 CFR FCC Part 15.407
Received Date
: Nov. 28, 2016
Tested Date
: Dec. 02, 2016 ~ Feb. 03, 2017
We, International Certification Corp., would like to declare that the tested sample has been
evaluated and in compliance with the requirement of the above standards. The test results
contained in this report refer exclusively to the product. It may be duplicated completely for
legal use with the approval of the applicant. It shall not be reproduced except in full without
the written approval of our laboratory.
Reviewed by:
Approved by:
Along Chen / Assistant Manager
Gary Chang / Manager
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 1 of 127
Table of Contents
GENERAL DESCRIPTION .................................................................................................................... 5
1.1
Information.............................................................................................................................................. 5
1.2
Local Support Equipment List ..............................................................................................................10
1.3
Test Setup Chart ..................................................................................................................................10
1.4
The Equipment List ..............................................................................................................................11
1.5
Testing Applied Standards ...................................................................................................................12
1.6
Measurement Uncertainty ....................................................................................................................12
TEST CONFIGURATION .....................................................................................................................13
2.1
Testing Condition .................................................................................................................................13
2.2
The Worst Test Modes and Channel Details .......................................................................................13
TRANSMITTER TEST RESULTS........................................................................................................15
3.1
Conducted Emissions ...........................................................................................................................15
3.2
Emission Bandwidth .............................................................................................................................20
3.3
RF Output Power ..................................................................................................................................25
3.4
Peak Power Spectral Density ...............................................................................................................31
3.5
Transmitter Radiated and Band Edge Emissions ................................................................................36
3.6
Frequency Stability .............................................................................................................................125
TEST LABORATORY INFORMATION .............................................................................................127
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 2 of 127
Release Record
Report No.
Version
FR6N2801AN
Rev. 01
Report No.: FR6N2801AN
Report Version: Rev. 01
Description
Initial issue
Issued Date
Apr. 06, 2017
Page : 3 of 127
Summary of Test Results
FCC Rules
Test Items
Measured
Result
Conducted Emissions
[dBuV]: 0.484MHz
30.59 (Margin -15.68dB) - AV
Pass
Radiated Emissions
[dBuV/m at 3m]: 5350.000MHz
53.00 (Margin -1.00dB) - AV
Pass
15.407(a)
Emission Bandwidth
Meet the requirement of limit
Pass
15.407(e)
6dB bandwidth
Meet the requirement of limit
Pass
15.407(a)
RF Output Power
Max Power [dBm]:
5150~5250MHz: 23.32
5250~5350MHz: 23.16
5470~5725MHz: 23.39
5725~5850MHz: 24.70
Pass
15.407(a)
Peak Power Spectral Density
Meet the requirement of limit
Pass
15.407(g)
Frequency Stability
Meet the requirement of limit
Pass
Antenna Requirement
Meet the requirement of limit
Pass
15.207
15.407(b)
15.209
15.203
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 4 of 127
1
General Description
1.1
Information
1.1.1
Specification of the Equipment under Test (EUT)
RF General Information
Frequency
Range (MHz)
5150-5250
5250-5350
5470-5725
5725-5850
5150-5250
5250-5350
5470-5725
5725-5850
5150-5250
5250-5350
5470-5725
5725-5850
5150-5250
5250-5350
5470-5725
5725-5850
5150-5250
5250-5350
5470-5725
5725-5850
5150-5250
5250-5350
5470-5725
5725-5850
IEEE Std.
802.11
Ch. Freq. (MHz)
Channel
Number
Transmit
Chains (NTX)
Data Rate /
MCS
5180-5240
5260-5320
5500-5720
5745-5825
36-48 [4]
52-64 [4]
100-144 [9]
149-165 [5]
6-54 Mbps
n (HT20)
5180-5240
5260-5320
5500-5720
5745-5825
36-48 [4]
52-64 [4]
100-144 [9]
149-165 [5]
MCS 0-23
n (HT40)
5190-5230
5270-5310
5510-5710
5755-5795
38-46 [2]
54-62 [2]
102-142 [4]
151-159 [2]
MCS 0-23
ac (VHT20)
5180-5240
5260-5320
5500-5720
5745-5825
36-48 [4]
52-64 [4]
100-144 [9]
149-165 [5]
MCS 0-9
ac (VHT40)
5190-5230
5270-5310
5510-5710
5755-5795
38-46 [2]
54-62 [2]
102-142 [4]
151-159 [2]
MCS 0-9
ac (VHT80)
5210
5290
5530~5690
5775
42 [1]
58 [1]
106-138 [2]
155 [1]
MCS 0-9
Note 1: RF output power specifies that Maximum Conducted Output Power.
Note 2: 802.11a/n/ac uses a combination of OFDM-BPSK, QPSK, 16QAM, 64QAM, 256QAM modulation.
Note 3: The device has disabled the 5600-5650MHz band by S/W setting.
1.1.2
Antenna Details
Operating Frequencies (GHz) / Antenna Gain (dBi)
Ant.
No.
Model
RD-NB2573-PULSE SN11
Dipole
R-SMA
RD-NB2573-PULSE SN02 Dipole
R-SMA
RD-NB2573-PULSE SN03 Dipole
R-SMA
Type Connector
2.4~2.4835
Report No.: FR6N2801AN
Report Version: Rev. 01
5.15~5.25
5.25~5.35
5.47~5.725 5.725~5.85
Page : 5 of 127
1.1.3
Power Supply Type of Equipment under Test (EUT)
Power Supply Type
1.1.4
3.3Vdc from host
Accessories
N/A
1.1.5
Channel List
802.11 a / HT20 / VHT20
HT40 / VHT40
Channel
Frequency(MHz)
Channel
Frequency(MHz)
36
5180
38
5190
40
5200
46
5230
44
5220
54
5270
48
5240
62
5310
52
5260
102
5510
56
5280
110
5550
60
5300
134
5670
64
5320
142
5710
100
5500
151
5755
104
5520
159
5795
108
5540
112
5560
42
5210
116
5580
58
5290
132
5660
106
5530
136
5680
138
5690
140
5700
155
5775
144
5720
---
---
149
5745
---
---
153
5765
---
---
157
5785
---
---
161
5805
---
---
165
5825
---
---
Report No.: FR6N2801AN
Report Version: Rev. 01
VHT80
Page : 6 of 127
1.1.6
Test Tool and Duty Cycle
Test Tool
ART2, Version: 4.9.802.1
Duty Cycle and Duty Factor
1.1.7
Mode
Duty cycle (%)
Duty factor (dB)
11a
98.34%
0.07
VHT20
98.15%
0.08
VHT40
94.78%
0.23
VHT80
90.37%
0.44
Power Setting
For Frequency band 5150-5250 MHz
Modulation Mode
Test Frequency (MHz)
Power Set
11a
5180
14
11a
5200
14
11a
5240
14
HT20
5180
14
HT20
5200
14
HT20
5240
14.5
HT40
5190
11.5
HT40
5230
18.5
VHT20
5180
14
VHT20
5200
14
VHT20
5240
14.5
VHT40
5190
11.5
VHT40
5230
18.5
VHT80
5210
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 7 of 127
For Frequency band 5250~5350 MHz
Modulation Mode
Test Frequency (MHz)
Power Set
11a
5260
14.5
11a
5300
15
11a
5320
15
HT20
5260
14.5
HT20
5300
15
HT20
5320
15
HT40
5270
19
HT40
5310
13
VHT20
5260
14.5
VHT20
5300
15
VHT20
5320
15
VHT40
5270
19
VHT40
5310
13
VHT80
5290
10.5
For Frequency band 5470~5725 MHz
Modulation Mode
Test Frequency (MHz)
Power Set
11a
5500
14.5
11a
5580
14.5
11a
5700
14.5
HT20
5500
14
HT20
5580
14.5
HT20
5700
14.5
HT40
5510
12
HT40
5550
19
HT40
5670
19
VHT20
5500
14
VHT20
5580
14.5
VHT20
5700
14.5
VHT40
5510
12
VHT40
5550
19
VHT40
5670
19
VHT80
5530
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 8 of 127
Channel that extends across the 5.725 GHz boundary
For Frequency band 5470~5725 MHz
Modulation Mode
Test Frequency (MHz)
Power Set
11a
5720
15.5
HT20
5720
16
HT40
5710
20
VHT20
5720
16
VHT40
5710
20
VHT80
5690
20
For Frequency band 5725~5850 MHz
Modulation Mode
Test Frequency (MHz)
Power Set
11a
5745
21
11a
5785
21
11a
5825
21
HT20
5745
21
HT20
5785
21
HT20
5825
21
HT40
5755
21
HT40
5795
21
VHT20
5745
21
VHT20
5785
21
VHT20
5825
21
VHT40
5755
21
VHT40
5795
21
VHT80
5775
19.5
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 9 of 127
1.2
Local Support Equipment List
Support Equipment List
No.
Equipment
Brand
Model
FCC ID
Notebook
Latitude E6430
9ZFB4X1
DoC
---
DC Power
Supply
GWINSTEK
GPC-3060D
---
---
Extension Card
---
---
---
---
1.3
Signal cable / Length (m)
Test Setup Chart
Test Setup Diagram
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 10 of 127
1.4
The Equipment List
Test Item
Conducted Emission
Test Site
Conduction room 1 / (CO01-WS)
Tested date
Dec. 23, 2016
Instrument
Manufacturer
Model No.
Serial No.
Calibration Date
Calibration Until
Receiver
R&S
ESR3
101657
Jan. 12, 2016
Jan. 11, 2017
Receiver
R&S
ESR3
101657
Dec. 21, 2016
Dec. 20, 2017
LISN
SCHWARZBECK
Schwarzbeck 8127
8127-667
Nov. 08, 2016
Nov. 07, 2017
RF Cable-CON
EMC
EMCCFD300-BM-BM-6000
50821
Dec. 20, 2016
Dec. 19, 2017
Measurement
Software
AUDIX
e3
6.120210k
NA
NA
Note: Calibration Interval of instruments listed above is one year.
Test Item
Radiated Emission
Test Site
966 chamber3 / (03CH03-WS)
Tested date
Dec. 06, 2016 ~ Feb. 03, 2017
Instrument
Manufacturer
Model No.
Serial No.
Calibration Date
Calibration Until
Spectrum Analyzer
Receiver
Agilent
Agilent
N9010A
N9038A
MY53400091
MY53290044
Sep. 09, 2016
Oct. 06, 2016
Sep. 08, 2017
Oct. 05, 2017
Bilog Antenna
Horn Antenna
1G-18G
Horn Antenna
18G-40G
Loop Antenna
SCHWARZBECK
VULB9168
VULB9168-685
Apr. 26, 2016
Apr. 25, 2017
SCHWARZBECK
BBHA 9120 D
BBHA 9120 D 1206
Feb. 24, 2016
Feb. 23, 2017
SCHWARZBECK
BBHA 9170
BBHA 9170517
Oct. 25, 2016
Oct. 24, 2017
R&S
HFH2-Z2
100330
Nov. 10, 2016
Nov. 09, 2017
Preamplifier
Preamplifier
EMC
Agilent
EMC02325
83017A
980187
MY53270014
Sep. 08, 2016
Aug. 22, 2016
Sep. 07, 2017
Aug. 21, 2017
Preamplifier
RF cable-3M
RF cable-8M
EMC
HUBER+SUHNER
HUBER+SUHNER
EMC184045B
SUCOFLEX104
SUCOFLEX104
980192
MY22620/4
MY22600/4
Aug. 24, 2016
Feb. 05, 2016
Feb. 05, 2016
Aug. 23, 2017
Feb. 04, 2017
Feb. 04, 2017
RF cable-1M
LF cable-0.8M
HUBER+SUHNER
EMC
SUCOFLEX104
EMC8D-NM-NM-800
MY22624/4
EMC8D-NM-NM-800-001
Feb. 05, 2016
Feb. 05, 2016
Feb. 04, 2017
Feb. 04, 2017
LF cable-3M
LF cable-13M
EMC
EMC
EMC8D-NM-NM-3000
EMC8D-NM-NM-13000
131103
131104
Feb. 05, 2016
Feb. 05, 2016
Feb. 04, 2017
Feb. 04, 2017
Measurement
Software
AUDIX
e3
6.120210g
NA
NA
Note: Calibration Interval of instruments listed above is one year.
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 11 of 127
Test Item
RF Conducted
Test Site
(TH01-WS)
Tested date
Dec. 02, 2016 ~ Feb. 03, 2017
Instrument
Manufacturer
Model No.
Serial No.
Calibration Date
Calibration Until
Spectrum Analyzer
R&S
FSV40
101063
Feb. 17, 2016
Feb. 16, 2017
TEMP&HUMIDITY
CHAMBER
GIANT FORCE
GCT-225-40-SP-SD
MAF1212-002
Nov. 21, 2016
Nov. 20, 2017
Power Meter
Anritsu
ML2495A
1241002
Oct. 06, 2016
Oct. 05, 2017
Power Sensor
Anritsu
MA2411B
1207366
Oct. 06, 2016
Oct. 05, 2017
DC POWER
SOURCE
GW INSTEK
GPC-6030D
EM892433
Oct. 20, 2016
Oct. 19, 2017
Measurement
Software
Sporton
Sporton_1
1.3.30
NA
NA
Note: Calibration Interval of instruments listed above is one year.
1.5
Testing Applied Standards
According to the specification of EUT, the EUT must comply with following standards and KDB documents.
47 CFR FCC Part 15.407
ANSI C63.10-2013
FCC KDB 789033 D02 General UNII Test Procedures New Rules v01r03
FCC KDB 644545 D03 Guidance for IEEE 802 11ac New Rules v01
FCC KDB 662911 D01 Multiple Transmitter Output v02r01
FCC KDB 412172 D01 Determining ERP and EIRP v01r01
1.6
Measurement Uncertainty
ISO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test
results be included in the report. The measurement uncertainties given below are based on a 95% confidence
level (based on a coverage factor (k=2)
Measurement Uncertainty
Parameters
Uncertainty
Bandwidth
±34.134 Hz
Conducted power
±0.808 dB
Frequency error
±34.134 Hz
Power density
±0.463 dB
Conducted emission
±2.670 dB
AC conducted emission
±2.90 dB
Radiated emission ≤ 1GHz
±3.72 dB
Radiated emission > 1GHz
±5.65 dB
Time
±0.1%
Temperature
±0.6 C
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 12 of 127
2
Test Configuration
2.1
Testing Condition
Test Item
AC Conduction
Radiated Emissions
RF Conducted
Test Site
Ambient Condition
Tested By
CO01-WS
17°C / 61%
Howard Huang
03CH03-WS
22°C / 65%
Brad Wu
Kevin Lee
Vincent Yeh
TH01-WS
21°C / 64%
Alex Huang
 FCC Designation No.:
TW0009
 FCC site registration No.:
207696
 IC site registration No.: 10807C-1
2.2
The Worst Test Modes and Channel Details
Frequency band 5150~5250 MHz / 5250~5350 MHz / 5470~5725 MHz
Test item
Modulation
Mode
Test Frequency
(MHz)
Data Rate
(Mbps) / MCS
Test
Configuration
Conducted Emissions
VHT40
5670
MCS 0
---
Radiated Emissions ≤1GHz
VHT40
5670
MCS 0
---
11a
5180 / 5200 / 5240 / 5260 / 5300
5320 / 5500 / 5580 / 5700 / 5720
6 Mbps
HT20
5180 / 5200 / 5240 / 5260 / 5300
5320 / 5500 / 5580 / 5700 / 5720
MCS 0
HT40
5190 / 5230/ 5270 / 5310 / 5510
5550 / 5670 / 5710
MCS 0
VHT20
5180 / 5200 / 5240 / 5260 / 5300
5320 / 5500 / 5580 / 5700 / 5720
MCS 0
VHT40
5190 / 5230/ 5270 / 5310 / 5510
5550 / 5670 / 5710
MCS 0
VHT80
5210 / 5290 / 5530 / 5690
MCS 0
11a
5180 / 5200 / 5240 / 5260 / 5300
5320 / 5500 / 5580 / 5700 / 5720
6 Mbps
VHT20
5180 / 5200 / 5240 / 5260 / 5300
5320 / 5500 / 5580 / 5700 / 5720
MCS 0
VHT40
5190 / 5230/ 5270 / 5310 / 5510
5550 / 5670 / 5710
MCS 0
VHT80
5210 / 5290 / 5530 / 5690
MCS 0
RF Output Power
Radiated Emissions >1GHz
Emission Bandwidth
Peak Power Spectral Density
Frequency Stability
Report No.: FR6N2801AN
Report Version: Rev. 01
Un-modulation 5320
---
---
---
---
Page : 13 of 127
Frequency band 5725-5850 MHz
Test item
Modulation
Mode
Test Frequency
(MHz)
Data Rate
(Mbps) / MCS
Test
Configuration
Conducted Emissions
VHT20
5745
MCS 0
---
Radiated Emissions ≤1GHz
VHT20
5745
MCS 0
---
11a
5745 / 5785 / 5825
6 Mbps
HT20
5745 / 5785 / 5825
MCS 0
HT40
5755 / 5795
MCS 0
VHT20
5745 / 5785 / 5825
MCS 0
VHT40
5755 / 5795
MCS 0
VHT80
5775
MCS 0
11a
5745 / 5785 / 5825
6 Mbps
Emission Bandwidth
VHT20
5745 / 5785 / 5825
MCS 0
6dB bandwidth
VHT40
5755 / 5795
MCS 0
VHT80
5775
MCS 0
RF Output Power
Radiated Emissions >1GHz
Peak Power Spectral Density
Frequency Stability
Report No.: FR6N2801AN
Report Version: Rev. 01
Un-modulation 5785
---
---
---
---
Page : 14 of 127
3
Transmitter Test Results
3.1
Conducted Emissions
3.1.1
Limit of Conducted Emissions
Conducted Emissions Limit
Frequency Emission (MHz)
Quasi-Peak
Average
0.15-0.5
66 - 56 *
56 - 46 *
0.5-5
56
46
5-30
60
50
Note 1: * Decreases with the logarithm of the frequency.
3.1.2
Test Procedures
1.
The device is placed on a test table, raised 80 cm above the reference ground plane. The vertical
conducting plane is located 40 cm to the rear of the device.
2.
The device is connected to line impedance stabilization network (LISN) and other accessories are
connected to other LISN. Measured levels of AC power line conducted emission are across the 50 Ω
LISN port.
3.
AC conducted emission measurements is made over frequency range from 150 kHz to 30 MHz.
4.
This measurement was performed with AC 120V/60Hz
3.1.3
Test Setup
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 15 of 127
3.1.4
Test Result of Conducted Emissions
Modulation
VHT40
Power Phase
Line
Test Freq. (MHz)
5670
Note 1: Level (dBuV) = Read Level (dBuV) + LISN Factor (dB) + Cable Loss (dB).
2: Over Limit (dB) = Level (dBuV) – Limit Line (dBuV).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 16 of 127
Modulation
VHT40
Power Phase
Neutral
Test Freq. (MHz)
5670
Note 1: Level (dBuV) = Read Level (dBuV) + LISN Factor (dB) + Cable Loss (dB).
2: Over Limit (dB) = Level (dBuV) – Limit Line (dBuV).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 17 of 127
Modulation
VHT20
Power Phase
Line
Test Freq. (MHz)
5745
Note 1: Level (dBuV) = Read Level (dBuV) + LISN Factor (dB) + Cable Loss (dB).
2: Over Limit (dB) = Level (dBuV) – Limit Line (dBuV).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 18 of 127
Modulation
VHT20
Power Phase
Neutral
Test Freq. (MHz)
5745
Note 1: Level (dBuV) = Read Level (dBuV) + LISN Factor (dB) + Cable Loss (dB).
2: Over Limit (dB) = Level (dBuV) – Limit Line (dBuV).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 19 of 127
3.2
Emission Bandwidth
3.2.1
Limit of Emission Bandwidth
Within the 5.725-5.85 GHz band, the minimum 6 dB bandwidth of U-NII devices shall be at least 500 kHz.
3.2.2
Test Procedures
26dB Bandwidth
1.
Set RBW = approximately 1% of the emission bandwidth.
2.
Set the VBW > RBW, Detector = Peak.
3.
Trace mode = max hold.
4.
Measure the maximum width of the emission that is 26 dB down from the peak of the emission.
Occupied Bandwidth
1.
Set RBW = 1 % to 5 % of the OBW
2.
Set VBW ≥ 3 RBW
3.
Sample detection and single sweep mode shall be used
4.
Use the 99 % power bandwidth function of the instrument
6dB Bandwidth
1.
Set RBW = 100kHz, VBW = 300kHz
2.
Detector = Peak,Trace mode = max hold.
3.
Allow the trace to stabilize.
4.
Measure the maximum width of the emission that is constrained by the frequencies associated with the
two outermost amplitude points (upper and lower frequencies) that are attenuated by 6 dB relative to the
maximum level measured in the fundamental emission
3.2.3
Test Setup
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 20 of 127
3.2.4
Test Result of Emission Bandwidth
For Frequency band 5150~5250 MHz
Emission Bandwidth
Mode
NTX
26dB Bandwidth (MHz)
99% Bandwidth (MHz)
Freq.
(MHz)
Chain 0
Chain 1
Chain 2
Chain 3
Chain 0
Chain 1
Chain 2
Chain 3
11a
5180
24.00
23.83
24.29
---
16.87
16.86
16.78
---
11a
5200
24.46
23.94
24.64
---
16.89
16.78
16.70
---
11a
5240
23.83
23.94
23.59
---
16.77
16.74
16.67
---
VHT20
5180
25.57
25.16
24.64
---
17.93
17.89
17.86
---
VHT20
5200
25.04
24.64
25.45
---
17.94
17.92
17.92
---
VHT20
5240
24.87
24.75
23.48
---
17.89
17.91
17.99
---
VHT40
5190
45.91
45.33
45.91
---
36.80
36.82
36.76
---
VHT40
5230
86.23
85.36
81.01
---
37.86
37.78
37.66
---
VHT80
5210
87.42
87.65
88.58
---
76.84
76.84
77.20
---
For Frequency band 5250~5350 MHz
Mode
NTX
Freq.
(MHz)
Chain 0
Chain 1
Chain 2
Chain 3
Chain 0
Chain 1
Chain 2
Chain 3
Power
Limit
(dBm)
26dB Bandwidth (MHz)
99% Bandwidth (MHz)
11a
5260
23.71
23.25
24.06
---
16.90
16.82
16.71
---
24.00
11a
5300
24.06
22.26
23.48
---
16.88
16.81
16.69
---
24.00
11a
5320
23.48
23.19
22.72
---
16.81
16.83
16.71
---
24.00
VHT20
5260
24.41
24.46
23.25
---
17.95
17.92
17.71
---
24.00
VHT20
5300
24.70
24.52
24.46
---
17.96
17.95
17.71
---
24.00
VHT20
5320
23.94
24.70
24.29
---
17.96
17.98
17.71
---
24.00
VHT40
5270
72.35
59.01
54.61
---
37.04
36.96
36.76
---
24.00
VHT40
5310
46.73
44.87
45.33
---
36.90
37.00
36.90
---
24.00
VHT80
5290
89.97
86.03
86.49
---
76.48
76.56
76.12
---
24.00
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 21 of 127
For Frequency band 5470~5725 MHz
Mode
NTX
Freq.
(MHz)
Chain 0
Chain 1
Chain 2
Chain 3
Chain 0
Chain 1
Chain 2
Chain 3
Power
Limit
(dBm)
26dB Bandwidth (MHz)
99% Bandwidth (MHz)
11a
5500
23.65
23.01
22.90
---
16.79
16.70
16.69
---
24.00
11a
5580
23.71
23.01
22.20
---
16.77
16.79
16.63
---
24.00
11a
5700
22.96
23.42
22.55
---
16.78
16.82
16.72
---
24.00
VHT20
5500
23.65
24.35
23.42
---
17.89
17.74
17.72
---
24.00
VHT20
5580
24.00
24.35
23.88
---
17.85
17.71
17.77
---
24.00
VHT20
5700
23.94
24.64
23.94
---
17.94
18.01
17.90
---
24.00
VHT40
5510
47.07
46.03
46.03
---
36.84
36.84
36.58
---
24.00
VHT40
5550
69.80
60.41
51.36
---
37.04
37.18
36.96
---
24.00
VHT40
5670
61.80
60.52
50.55
---
37.02
37.16
36.84
---
24.00
VHT80
5530
87.65
86.73
86.26
---
76.52
76.64
76.56
---
24.00
Worst Plot of 26dB Bandwidth
Report No.: FR6N2801AN
Report Version: Rev. 01
Worst Plot of 99% Bandwidth
Page : 22 of 127
Channel that extends across the 5.725 GHz boundary
Frequency band
Mode
NTX
UNII Emission Bandwidth Result ( Within 5470-5725MHz band )
Freq.
(MHz)
Chain 0
Chain 1
Chain 2
Chain 3
Chain 0
Chain 1
Chain 2
Chain 3
Power
Limit
(dBm)
26dB Bandwidth (MHz)
99% Bandwidth (MHz)
11a
5720
16.88
18.05
16.51
---
13.40
13.38
13.37
---
23.18
VHT20
5720
16.45
17.55
17.68
---
13.99
13.99
13.94
---
23.16
VHT40
5710
51.74
55.39
48.29
---
33.65
33.73
33.51
---
24.00
VHT80
5690
125.87
126.52
91.96
---
73.62
73.82
73.46
---
24.00
Frequency band
Mode
NTX
UNII Emission Bandwidth Result (Extends across 5725MHz band )
Freq.
(MHz)
Chain 0
Chain 1
Chain 2
Chain 3
Chain 0
Chain 1
Chain 2
Chain 3
Power
Limit
(dBm)
26dB Bandwidth (MHz)
99% Bandwidth (MHz)
11a
5720
7.61
8.91
7.24
---
3.40
3.41
3.35
---
30.00
VHT20
5720
27.83
30.09
22.67
---
3.98
4.00
3.92
---
30.00
VHT40
5710
53.04
59.30
40.61
---
3.59
3.65
3.49
---
30.00
VHT80
5690
7.61
8.91
7.24
---
3.34
3.54
3.22
---
30.00
Worst Plots
Within 5470-5725MHz band
Report No.: FR6N2801AN
Report Version: Rev. 01
Extends across 5725MHz band
Page : 23 of 127
For Frequency band 5725-5850 MHz
Emission Bandwidth
OBW Bandwidth (MHz)
Mode
NTX
Freq.
(MHz)
6dB Bandwidth (MHz)
Chain 0 Chain 1 Chain 2 Chain 3 Chain 0 Chain 1 Chain 2 Chain 3
6dB BW
Limit
(MHz)
11a
5745
20.49
21.84
21.97
---
16.29
15.94
16.35
---
0.5
11a
5785
21.77
21.31
22.09
---
15.71
16.06
16.35
---
0.5
11a
5825
20.33
22.60
20.64
---
16.35
16.35
15.71
---
0.5
VHT20
5745
20.08
21.47
18.48
---
17.16
17.57
17.57
---
0.5
VHT20
5785
19.85
22.05
21.39
---
17.57
16.06
17.57
---
0.5
VHT20
5825
21.36
22.48
20.92
---
17.57
17.57
17.57
---
0.5
VHT40
5755
38.35
39.25
40.35
---
35.36
35.94
36.29
---
0.5
VHT40
5795
38.45
40.03
39.49
---
36.29
35.13
35.13
---
0.5
VHT80
5775
77.65
77.44
77.55
---
71.42
73.04
66.78
---
0.5
Worst Plots of 99% Bandwidth
Report No.: FR6N2801AN
Report Version: Rev. 01
Worst Plots of 6dB Bandwidth
Page : 24 of 127
3.3
RF Output Power
3.3.1
Limit of RF Output Power
Frequency band 5150-5250 MHz
Operating Mode
Limit
Outdoor access point
Conducted Power: 1 W
The maximum e.i.r.p. at any elevation angle above 30 degrees
as measured from the horizon must not exceed 125 mW (21
dBm)
Indoor access point
Conducted Power: 1 W
Fixed point-to-point access points
Conducted Power: 1 W
Client devices
Conducted Power: 250 mW
Frequency Band (MHz)
Limit
5250 ~ 5350
250mW or 11dBm+10 log B
5470 ~ 5725
250mW or 11dBm+10 log B
5725 ~ 5850
1W
Note: “B” is the 26dB emission bandwidth in MHz.
3.3.2
Test Procedures
Power meter ( For channel that does not extends across the 5.725 GHz boundary )
Measurements is performed using a wideband gated RF power meter provided that the gate
parameters are adjusted such that the power is measured only when the EUT is transmitting at its
maximum power control level. Since the measurement is made only during the ON time of the
transmitter, no duty cycle correction factor is required
Spectrum analyzer ( For channel that extends across the 5.725 GHz boundary )
1.
Set RBW=1MHz, VBW=3MHz , Sweep time= Auto, Detector = RMS
2.
Trace average at least 100 traces in power averaging mode
3.
Compute power by integrating the spectrum across the 26 dB EBW
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 25 of 127
3.3.3
Test Setup
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 26 of 127
3.3.4
Test Result of Maximum Conducted Output Power
For Frequency band 5150~5250 MHz
Conducted Power (dBm)
Chain 0
Chain 1
Chain 2
Chain 3
Total
Power
(mW)
5180
15.81
15.02
13.85
---
94.141
19.74
24.00
5200
15.57
14.83
14.39
---
93.946
19.73
24.00
11a
5240
15.12
14.26
13.56
---
81.876
19.13
24.00
HT20
5180
16.05
15.09
14.15
---
98.558
19.94
24.00
HT20
5200
16.21
15.26
14.30
---
102.272
20.10
24.00
HT20
5240
16.08
14.91
13.59
---
94.381
19.75
24.00
HT40
5190
12.99
12.05
11.80
---
51.075
17.08
24.00
HT40
5230
18.86
18.41
18.15
---
211.569
23.25
24.00
VHT20
5180
16.09
15.15
14.21
---
99.742
19.99
24.00
VHT20
5200
16.26
15.32
14.38
---
103.723
20.16
24.00
VHT20
5240
16.11
14.97
13.66
---
95.464
19.80
24.00
VHT40
5190
13.06
12.14
11.86
---
51.945
17.16
24.00
VHT40
5230
18.93
18.46
18.22
---
214.683
23.32
24.00
VHT80
5210
10.25
9.22
8.86
---
26.640
14.26
24.00
Total
Power
(dBm)
Limit
(dBm)
Mode
NTX
Freq. (MHz)
11a
11a
Total
Power
(dBm)
Limit
(dBm)
For Frequency band 5250~5350 MHz
Conducted Power (dBm)
Chain 0
Chain 1
Chain 2
Chain 3
Total
Power
(mW)
5260
14.64
14.73
13.49
---
81.160
19.09
24.00
5300
14.46
14.4
13.75
---
79.181
18.99
24.00
11a
5320
14.66
14.78
13.61
---
82.264
19.15
24.00
HT20
5260
14.63
14.69
13.47
---
80.718
19.07
24.00
HT20
5300
14.39
14.30
13.64
---
77.515
18.89
24.00
HT20
5320
14.61
14.59
13.71
---
81.177
19.09
24.00
HT40
5270
18.47
18.61
17.79
---
203.035
23.08
24.00
HT40
5310
11.59
11.25
11.02
---
40.404
16.06
24.00
VHT20
5260
14.67
14.76
13.53
---
81.774
19.13
24.00
VHT20
5300
14.45
14.36
13.69
---
78.539
18.95
24.00
VHT20
5320
14.68
14.65
13.75
---
82.265
19.15
24.00
VHT40
5270
18.55
18.68
17.88
---
206.781
23.16
24.00
VHT40
5310
11.68
11.29
11.09
---
41.035
16.13
24.00
VHT80
5290
9.95
9.86
9.52
---
28.522
14.55
24.00
Mode
NTX
Freq. (MHz)
11a
11a
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 27 of 127
For Frequency band 5470~5725 MHz
Conducted Power (dBm)
Chain 0
Chain 1
Chain 2
Chain 3
Total
Power
(mW)
5500
14.67
15.02
13.38
---
82.855
19.18
24.00
5580
14.61
15.04
13.46
---
83.004
19.19
24.00
11a
5700
14
15.01
14.42
---
84.484
19.27
24.00
HT20
5500
14.58
14.81
13.29
---
80.307
19.05
24.00
HT20
5580
14.79
14.69
13.58
---
82.378
19.16
24.00
HT20
5700
13.97
15.01
13.81
---
80.685
19.07
24.00
HT40
5510
12.29
11.72
11.42
---
45.670
16.60
24.00
HT40
5550
18.70
18.97
17.88
---
214.393
23.31
24.00
HT40
5670
18.29
19.12
18.21
---
215.333
23.33
24.00
VHT20
5500
14.62
14.85
13.35
---
81.150
19.09
24.00
VHT20
5580
14.86
14.75
13.66
---
83.701
19.23
24.00
VHT20
5700
14.02
15.03
13.85
---
81.343
19.10
24.00
VHT40
5510
12.31
11.76
11.48
---
46.079
16.64
24.00
VHT40
5550
18.75
19.01
17.93
---
216.692
23.36
24.00
VHT40
5670
18.37
19.16
18.23
---
217.648
23.38
24.00
VHT80
5530
9.86
9.72
8.86
---
26.750
14.27
24.00
Mode
NTX
Freq. (MHz)
11a
11a
Report No.: FR6N2801AN
Report Version: Rev. 01
Total
Power
(dBm)
Limit
(dBm)
Page : 28 of 127
Channel that extends across the 5.725 GHz boundary
Maximum Conducted Output Power (Within 5470-5725MHz band)
Conducted Power without duty factor
Mode
NTX
Freq.
(MHz)
Chain 0 Chain 1 Chain 2 Chain 3
Total
Power
(dBm)
Duty
factor
(dB)
Total
Power
(mW)
Total
Power
(dBm)
Limit
(dBm)
11a
5720
13.77
14.56
13.68
---
18.79
0.00
75.734
18.79
23.18
HT20
5720
13.68
14.92
13.77
---
18.93
0.00
78.203
18.93
23.16
HT40
5710
18.11
18.73
17.44
---
22.90
0.23
205.417
23.13
24.00
VHT20
5720
13.76
14.99
13.89
---
19.02
0.00
79.809
19.02
23.16
VHT40
5710
18.23
18.82
17.41
---
22.96
0.23
208.575
23.19
24.00
VHT80
5690
18.20
18.59
17.71
---
22.95
0.44
218.410
23.39
24.00
Maximum Conducted Output Power (Extends across 5725MHz band)
Conducted Power without duty factor
Mode
NTX
Freq.
(MHz)
Chain 0 Chain 1 Chain 2 Chain 3
Total
Power
(dBm)
Duty
factor
(dB)
Total
Power
(mW)
Total
Power
(dBm)
Limit
(dBm)
11a
5720
7.50
8.42
7.56
---
12.62
0.00
18.275
12.62
30.00
HT20
5720
8.69
10.09
7.96
---
13.78
0.00
23.857
13.78
30.00
HT40
5710
7.00
7.31
7.04
---
11.89
0.23
16.293
12.12
30.00
VHT20
5720
8.71
10.09
8.08
---
13.81
0.00
24.066
13.81
30.00
VHT40
5710
7.09
7.34
7.12
---
11.96
0.23
16.542
12.19
30.00
VHT80
5690
3.26
4.34
2.92
---
8.32
0.44
7.518
8.76
30.00
Worst Channel Power Plots
Within 5470-5725MHz band
Extends across 5725MHz band
Note: Above plots are without duty factor.
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 29 of 127
For Frequency band 5725-5850 MHz
Conducted Power (dBm)
Chain 0
Chain 1
Chain 2
Chain 3
Total
Power
(mW)
5745
19.56
19.51
19.65
---
271.953
24.34
30.00
5785
19.53
19.54
20.32
---
287.339
24.58
30.00
11a
5825
19.53
19.56
19.71
---
273.648
24.37
30.00
HT20
5745
19.59
19.81
20.25
---
292.636
24.66
30.00
HT20
5785
19.47
19.71
19.47
---
270.564
24.32
30.00
HT20
5825
19.48
19.71
19.80
---
277.755
24.44
30.00
HT40
5755
19.46
19.48
19.54
---
266.973
24.26
30.00
HT40
5795
19.49
19.47
19.98
---
276.972
24.42
30.00
VHT20
5745
19.62
19.84
20.31
---
295.404
24.70
30.00
VHT20
5785
19.54
19.76
19.53
---
274.316
24.38
30.00
VHT20
5825
19.52
19.75
19.84
---
280.325
24.48
30.00
VHT40
5755
19.52
19.52
19.57
---
269.646
24.31
30.00
VHT40
5795
19.53
19.52
20.02
---
279.741
24.47
30.00
VHT80
5775
18.11
17.67
18.04
---
186.873
22.72
30.00
Mode
NTX
Freq. (MHz)
11a
11a
Report No.: FR6N2801AN
Report Version: Rev. 01
Total
Power
(dBm)
Limit
(dBm)
Page : 30 of 127
3.4
Peak Power Spectral Density
3.4.1
Limit of Peak Power Spectral Density
Frequency band 5150-5250 MHz
Operating Mode
Limit
Outdoor access point
17 dBm / MHz
Indoor access point
17 dBm / MHz
Fixed point-to-point access points
17 dBm / MHz
Client devices
11 dBm / MHz
Frequency Band (MHz)
Limit
5250 ~ 5350
11 dBm / MHz
5470 ~ 5725
11 dBm / MHz
5725 ~ 5850
30 dBm /500 kHz
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 31 of 127
3.4.2
Test Procedures
For 5150~5250 MHz, 5250~5350 MHz, 5470~5725 MHz
Method SA-1 (For 11a / 11ac VHT20)
1.
Set RBW = 1 MHz, VBW = 3 MHz, Sweep time = auto, Detector = RMS.
2.
Trace average 100 traces.
3.
Use the peak marker function to determine the maximum amplitude level.
Method SA-2 Alternative (For 11ac VHT40 / VHT80)
1.
Set RBW = 1 MHz, VBW = 3 MHz, Detector = RMS.
2.
Set sweep time ≥ 10 * (number of points in sweep) * (total on/off period of the transmitted signal).
3.
Perform a single sweep.
4.
Use the peak marker function to determine the maximum amplitude level.
5.
Add 10 log(1/x), where x is the duty cycle.
For 5725~5850 MHz
Method SA-1 (For 11a / 11ac VHT20)
1.
Set RBW = 500 kHz, VBW = 2 MHz, Sweep time = auto, Detector = RMS.
2.
Trace average 100 traces.
3.
Use the peak marker function to determine the maximum amplitude level.
Method SA-2 Alternative(For 11ac VHT40 / VHT80)
1.
Set RBW = 500 kHz, VBW = 2 MHz, Detector = RMS.
2.
Set sweep time ≥ 10 * (number of points in sweep) * (total on/off period of the transmitted signal).
3.
Perform a single sweep.
4.
Use the peak marker function to determine the maximum amplitude level.
5.
Add 10 log(1/x), where x is the duty cycle.
3.4.3
Test Setup
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 32 of 127
3.4.4
Test Result of Peak Power Spectral Density
Frequency band
5150~5250 MHz / 5250~5350 MHz
Condition
Peak Power Spectral Density (dBm/MHz)
Mode
NTX
Freq. (MHz)
PPSD
w/o D.F
(dBm/MHz)
Duty Factor
(dB)
PPSD
with D.F
(dBm/MHz)
PPSD Limit
(dBm/MHz)
11a
5180
7.02
0.00
7.02
7.23
11a
5200
7.11
0.00
7.11
7.23
11a
5240
6.45
0.00
6.45
7.23
VHT20
5180
6.84
0.00
6.84
7.23
VHT20
5200
6.95
0.00
6.95
7.23
VHT20
5240
6.82
0.00
6.82
7.23
VHT40
5190
-2.58
0.23
-2.35
7.23
VHT40
5230
6.93
0.23
7.16
7.23
VHT80
5210
-8.68
0.44
-8.24
7.23
11a
5260
6.77
0.00
6.77
7.23
11a
5300
6.67
0.00
6.67
7.23
11a
5320
6.77
0.00
6.77
7.23
VHT20
5260
6.67
0.00
6.67
7.23
VHT20
5300
6.78
0.00
6.78
7.23
VHT20
5320
6.91
0.00
6.91
7.23
VHT40
5270
6.46
0.23
6.69
7.23
VHT40
5310
0.07
0.23
0.30
7.23
VHT80
5290
-4.82
0.44
-4.38
7.23
Note:
1. D.F is duty factor.
2. Test results are bin-by-bin summing measured value of each TX port.
3. Directional gain =5 + 10 * log(3/1) = 9.77 dBi > 6 dBi
Limit shall be reduced to 11 dBm – (9.77 dBi – 6 dBi) =7.23 dBm
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 33 of 127
Frequency band
5470~5725 MHz
Condition
Peak Power Spectral Density (dBm/MHz)
Mode
NTX
Freq. (MHz)
PPSD
w/o D.F
(dBm/MHz)
Duty Factor
(dB)
PPSD
with D.F
(dBm/MHz)
PPSD Limit
(dBm/MHz)
11a
5500
7.07
0.00
7.07
7.23
11a
5580
6.96
0.00
6.96
7.23
11a
5700
6.85
0.00
6.85
7.23
11a
5720
6.93
0.00
6.93
7.23
VHT20
5500
6.59
0.00
6.59
7.23
VHT20
5580
7.02
0.00
7.02
7.23
VHT20
5700
6.65
0.00
6.65
7.23
VHT20
5720
7.13
0.00
7.13
7.23
VHT40
5510
0.42
0.23
0.65
7.23
VHT40
5550
6.82
0.23
7.05
7.23
VHT40
5670
6.59
0.23
6.82
7.23
VHT40
5710
6.86
0.23
7.09
7.23
VHT80
5530
-6.09
0.44
-5.65
7.23
VHT80
5690
3.91
0.44
4.35
7.23
Note:
1. D.F is duty factor.
2. Test results are bin-by-bin summing measured value of each TX port.
3. Directional gain =5 + 10 * log(3/1) = 9.77 dBi > 6 dBi
Limit shall be reduced to 11 dBm – (9.77 dBi – 6 dBi) =7.23 dBm
Worst Plot
Note: Power density plot without duty factor.
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 34 of 127
Frequency band
5725-5850 MHz
Condition
Peak Power Spectral Density (dBm/500kHz)
Mode
NTX
Freq. (MHz)
PPSD
w/o D.F
(dBm/500kHz)
Duty Factor
(dB)
PPSD
with D.F
(dBm/500kHz)
PPSD Limit
(dBm/500kHz)
11a
5745
9.77
0.00
9.77
26.23
11a
5785
9.58
0.00
9.58
26.23
11a
5825
9.29
0.00
9.29
26.23
VHT20
5745
9.33
0.00
9.33
26.23
VHT20
5785
9.30
0.00
9.30
26.23
VHT20
5825
9.05
0.00
9.05
26.23
VHT40
5755
5.57
0.23
5.80
26.23
VHT40
5795
5.63
0.23
5.86
26.23
VHT80
5775
0.81
0.44
1.25
26.23
Note:
1. D.F is duty factor.
2. Test results are bin-by-bin summing measured value of each TX port.
3. Directional gain =5 + 10 * log(3/1) = 9.77 dBi > 6 dBi
Limit shall be reduced to 30 dBm – (9.77 dBi – 6 dBi) =26.23 dBm
Worst Plot
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 35 of 127
3.5
Transmitter Radiated and Band Edge Emissions
3.5.1
Limit of Transmitter Radiated and Band Edge Emissions
Restricted Band Emissions Limit
Frequency Range (MHz)
Field Strength (uV/m)
Field Strength (dBuV/m)
Measure Distance (m)
0.009~0.490
2400/F(kHz)
48.5 - 13.8
300
0.490~1.705
24000/F(kHz)
33.8 - 23
30
1.705~30.0
30
29
30
30~88
100
40
88~216
150
43.5
216~960
200
46
Above 960
500
54
Note 1:
Qusai-Peak value is measured for frequency below 1GHz except for 9–90 kHz, 110–490 kHz frequency band. Peak and
average value are measured for frequency above 1GHz. The limit on average radio frequency emission is as above
table. The limit on peak radio frequency emissions is 20 dB above the maximum permitted average emission limit
Note 2:
Measurements may be performed at a distance other than what is specified provided. When performing measurements
at a distance other than that specified, the results shall be extrapolated to the specified distance using an extrapolation
factor as below, Frequency at or above 30 MHz: 20 dB/decade Frequency below 30 MHz: 40 dB/decade.
Un-restricted band emissions above 1GHz Limit
Operating Band
Limit
5.15 - 5.25 GHz
e.i.r.p. -27 dBm [68.2 dBuV/m@3m]
5.25 - 5.35 GHz
e.i.r.p. -27 dBm [68.2 dBuV/m@3m]
5.47 - 5.725 GHz
e.i.r.p. -27 dBm [68.2 dBuV/m@3m]
5.725 - 5.850 GHz
15.407(b)(4)(i)
All emissions shall be limited to a level of −27 dBm/MHz at 75 MHz or more
above or below the band edge increasing linearly to 10 dBm/MHz at 25 MHz
above or below the band edge, and from 25 MHz above or below the band
edge increasing linearly to a level of 15.6 dBm/MHz at 5 MHz above or
below the band edge, and from 5 MHz above or below the band edge
increasing linearly to a level of 27 dBm/MHz at the band edge.
15.407(b)(4)(ii) ,compliance with the emission limits in § 15.247(d)
Shall be at least 30dB below that in the 100 kHz bandwidth within the band
that contains the highest level of the desired power,. Attenuation below the
general limits specified in §15.209(a) is not required. In addition,radiated
emissions which fall in the restricted bands, as defined in §15.205(a), must
also comply with the radiated emission limits specified in §15.209(a) (see §
15.205(c))
Note 1: Measurements may be performed at a distance other than the limit distance provided they are not
performed in the near field and the emissions to be measured can be detected by the measurement
equipment. When performing measurements at a distance other than that specified, the results shall
be extrapolated to the specified distance using an extrapolation factor of 20 dB/decade (inverse of
linear distance for field-strength measurements, inverse of linear distance-squared for power-density
measurements).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 36 of 127
3.5.2
Test Procedures
1.
Measurement is made at a semi-anechoic chamber that incorporates a turntable allowing a EUT
rotation of 360°. A continuously-rotating, remotely-controlled turntable is installed at the test site to
support the EUT and facilitate determination of the direction of maximum radiation for each EUT
emission frequency. The EUT is placed at test table. For emissions testing at or below 1 GHz, the table
height is 80 cm above the reference ground plane. For emission measurements above 1 GHz, the table
height is 1.5 m
2.
Measurement is made with the antenna positioned in both the horizontal and vertical planes of
polarization. The measurement antenna is varied in height (1m ~ 4m) above the reference ground plane
to obtain the maximum signal strength. Distance between EUT and antenna is 3 m.
3.
This investigation is performed with the EUT rotated 360°, the antenna height scanned between 1 m
and 4 m, and the antenna rotated to repeat the measurements for both the horizontal and vertical
antenna polarizations.
Note:
1.
120kHz measurement bandwidth of test receiver and Quasi-peak detector is for radiated emission below 1GHz.
2.
RBW=1MHz, VBW=3MHz and Peak detector is for peak measured value of radiated emission above 1GHz.
3.
RBW=1MHz, VBW=1/T and Peak detector is for average measured value of radiated emission above 1GHz.
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 37 of 127
3.5.3
Test Setup
Radiated Emissions below 1 GHz
Radiated Emissions above 1 GHz
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 38 of 127
3.5.4
Transmitter Radiated Unwanted Emissions (Below 1GHz)
Modulation
VHT40
Polarization
Horizontal
Test Freq. (MHz)
5670
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Note 3: All spurious emissions below 30MHz are more than 20 dB below the limit.
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 39 of 127
Modulation
VHT40
Polarization
Vertical
Test Freq. (MHz)
5670
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Note 3: All spurious emissions below 30MHz are more than 20 dB below the limit.
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 40 of 127
Modulation
VHT20
Polarization
Horizontal
Test Freq. (MHz)
5745
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Note 3: All spurious emissions below 30MHz are more than 20 dB below the limit.
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 41 of 127
Modulation
VHT20
Polarization
Vertical
Test Freq. (MHz)
5745
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Note 3: All spurious emissions below 30MHz are more than 20 dB below the limit.
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 42 of 127
3.5.5
Transmitter Radiated Unwanted Emissions (Above 1GHz) for 11a
Modulation
11a
Polarization
Horizontal
Test Freq. (MHz)
5180
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 43 of 127
Modulation
11a
Polarization
Vertical
Test Freq. (MHz)
5180
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 44 of 127
Modulation
11a
Polarization
Horizontal
Test Freq. (MHz)
5200
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 45 of 127
Modulation
11a
Polarization
Vertical
Test Freq. (MHz)
5200
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 46 of 127
Modulation
11a
Polarization
Horizontal
Test Freq. (MHz)
5240
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 47 of 127
Modulation
11a
Polarization
Vertical
Test Freq. (MHz)
5240
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 48 of 127
Modulation
11a
Polarization
Horizontal
Test Freq. (MHz)
5260
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 49 of 127
Modulation
11a
Polarization
Vertical
Test Freq. (MHz)
5260
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 50 of 127
Modulation
11a
Polarization
Horizontal
Test Freq. (MHz)
5300
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 51 of 127
Modulation
11a
Polarization
Vertical
Test Freq. (MHz)
5300
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 52 of 127
Modulation
11a
Polarization
Horizontal
Test Freq. (MHz)
5320
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 53 of 127
Modulation
11a
Polarization
Vertical
Test Freq. (MHz)
5320
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 54 of 127
Modulation
11a
Polarization
Horizontal
Test Freq. (MHz)
5500
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 55 of 127
Modulation
11a
Polarization
Vertical
Test Freq. (MHz)
5500
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 56 of 127
Modulation
11a
Polarization
Horizontal
Test Freq. (MHz)
5580
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 57 of 127
Modulation
11a
Polarization
Vertical
Test Freq. (MHz)
5580
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 58 of 127
Modulation
11a
Polarization
Horizontal
Test Freq. (MHz)
5700
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 59 of 127
Modulation
11a
Polarization
Vertical
Test Freq. (MHz)
5700
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 60 of 127
Modulation
11a
Polarization
Horizontal
Test Freq. (MHz)
5720
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 61 of 127
Modulation
11a
Polarization
Vertical
Test Freq. (MHz)
5720
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 62 of 127
Modulation
11a
Polarization
Horizontal
Test Freq. (MHz)
5745
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 63 of 127
Modulation
11a
Polarization
Vertical
Test Freq. (MHz)
5745
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 64 of 127
Modulation
11a
Polarization
Horizontal
Test Freq. (MHz)
5785
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 65 of 127
Modulation
11a
Polarization
Vertical
Test Freq. (MHz)
5785
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 66 of 127
Modulation
11a
Polarization
Horizontal
Test Freq. (MHz)
5825
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 67 of 127
Modulation
11a
Polarization
Vertical
Test Freq. (MHz)
5825
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 68 of 127
3.5.6
Transmitter Radiated Unwanted Emissions (Above 1GHz) for VHT20
Modulation
VHT20
Polarization
Horizontal
Test Freq. (MHz)
5180
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 69 of 127
Modulation
VHT20
Polarization
Vertical
Test Freq. (MHz)
5180
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 70 of 127
Modulation
VHT20
Polarization
Horizontal
Test Freq. (MHz)
5200
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 71 of 127
Modulation
VHT20
Polarization
Vertical
Test Freq. (MHz)
5200
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 72 of 127
Modulation
VHT20
Polarization
Horizontal
Test Freq. (MHz)
5240
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 73 of 127
Modulation
VHT20
Polarization
Vertical
Test Freq. (MHz)
5240
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 74 of 127
Modulation
VHT20
Polarization
Horizontal
Test Freq. (MHz)
5260
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 75 of 127
Modulation
VHT20
Polarization
Vertical
Test Freq. (MHz)
5260
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 76 of 127
Modulation
VHT20
Polarization
Horizontal
Test Freq. (MHz)
5300
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 77 of 127
Modulation
VHT20
Polarization
Vertical
Test Freq. (MHz)
5300
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 78 of 127
Modulation
VHT20
Polarization
Horizontal
Test Freq. (MHz)
5320
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 79 of 127
Modulation
VHT20
Polarization
Vertical
Test Freq. (MHz)
5320
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 80 of 127
Modulation
VHT20
Polarization
Horizontal
Test Freq. (MHz)
5500
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 81 of 127
Modulation
VHT20
Polarization
Vertical
Test Freq. (MHz)
5500
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 82 of 127
Modulation
VHT20
Polarization
Horizontal
Test Freq. (MHz)
5580
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 83 of 127
Modulation
VHT20
Polarization
Vertical
Test Freq. (MHz)
5580
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 84 of 127
Modulation
VHT20
Polarization
Horizontal
Test Freq. (MHz)
5700
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 85 of 127
Modulation
VHT20
Polarization
Vertical
Test Freq. (MHz)
5700
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 86 of 127
Modulation
VHT20
Polarization
Horizontal
Test Freq. (MHz)
5720
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 87 of 127
Modulation
VHT20
Polarization
Vertical
Test Freq. (MHz)
5720
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 88 of 127
Modulation
VHT20
Polarization
Horizontal
Test Freq. (MHz)
5745
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 89 of 127
Modulation
VHT20
Polarization
Vertical
Test Freq. (MHz)
5745
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 90 of 127
Modulation
VHT20
Polarization
Horizontal
Test Freq. (MHz)
5785
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 91 of 127
Modulation
VHT20
Polarization
Vertical
Test Freq. (MHz)
5785
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 92 of 127
Modulation
VHT20
Polarization
Horizontal
Test Freq. (MHz)
5825
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 93 of 127
Modulation
VHT20
Polarization
Vertical
Test Freq. (MHz)
5825
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 94 of 127
3.5.7
Transmitter Radiated Unwanted Emissions (Above 1GHz) for VHT40
Modulation
VHT40
Polarization
Horizontal
Test Freq. (MHz)
5190
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 95 of 127
Modulation
VHT40
Polarization
Vertical
Test Freq. (MHz)
5190
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 96 of 127
Modulation
VHT40
Polarization
Horizontal
Test Freq. (MHz)
5230
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 97 of 127
Modulation
VHT40
Polarization
Vertical
Test Freq. (MHz)
5230
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 98 of 127
Modulation
VHT40
Polarization
Horizontal
Test Freq. (MHz)
5270
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 99 of 127
Modulation
VHT40
Polarization
Vertical
Test Freq. (MHz)
5270
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 100 of 127
Modulation
VHT40
Polarization
Horizontal
Test Freq. (MHz)
5310
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 101 of 127
Modulation
VHT40
Polarization
Vertical
Test Freq. (MHz)
5310
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 102 of 127
Modulation
VHT40
Polarization
Horizontal
Test Freq. (MHz)
5510
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 103 of 127
Modulation
VHT40
Polarization
Vertical
Test Freq. (MHz)
5510
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 104 of 127
Modulation
VHT40
Polarization
Horizontal
Test Freq. (MHz)
5550
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 105 of 127
Modulation
VHT40
Polarization
Vertical
Test Freq. (MHz)
5550
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 106 of 127
Modulation
VHT40
Polarization
Horizontal
Test Freq. (MHz)
5670
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 107 of 127
Modulation
VHT40
Polarization
Vertical
Test Freq. (MHz)
5670
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 108 of 127
Modulation
VHT40
Polarization
Horizontal
Test Freq. (MHz)
5710
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 109 of 127
Modulation
VHT40
Polarization
Vertical
Test Freq. (MHz)
5710
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 110 of 127
Modulation
VHT40
Polarization
Horizontal
Test Freq. (MHz)
5755
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 111 of 127
Modulation
VHT40
Polarization
Vertical
Test Freq. (MHz)
5755
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 112 of 127
Modulation
VHT40
Polarization
Horizontal
Test Freq. (MHz)
5795
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 113 of 127
Modulation
VHT40
Polarization
Vertical
Test Freq. (MHz)
5795
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 114 of 127
3.5.8
Transmitter Radiated Unwanted Emissions (Above 1GHz) for VHT80
Modulation
VHT80
Polarization
Horizontal
Test Freq. (MHz)
5210
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 115 of 127
Modulation
VHT80
Polarization
Vertical
Test Freq. (MHz)
5210
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 116 of 127
Modulation
VHT80
Polarization
Horizontal
Test Freq. (MHz)
5290
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 117 of 127
Modulation
VHT80
Polarization
Vertical
Test Freq. (MHz)
5290
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 118 of 127
Modulation
VHT80
Polarization
Horizontal
Test Freq. (MHz)
5530
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 119 of 127
Modulation
VHT80
Polarization
Vertical
Test Freq. (MHz)
5530
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 120 of 127
Modulation
VHT80
Polarization
Horizontal
Test Freq. (MHz)
5690
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 121 of 127
Modulation
VHT80
Polarization
Vertical
Test Freq. (MHz)
5690
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 122 of 127
Modulation
VHT80
Polarization
Horizontal
Test Freq. (MHz)
5775
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 123 of 127
Modulation
VHT80
Polarization
Vertical
Test Freq. (MHz)
5775
Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 124 of 127
3.6
Frequency Stability
3.6.1
Limit of Frequency Stability
Manufacturers of U-NII devices are responsible for ensuring frequency stability such that an emission is
maintained within the band of operation under all conditions of normal operation as specified in the user’s
manual.
3.6.2
Test Procedures
1.
The EUT is installed in an environment test chamber with external power source.
2.
Set the chamber to operate at 55 centigrade and external power source to output at nominal voltage of
EUT.
3.
A sufficient stabilization period at each temperature is used prior to each frequency measurement.
4.
When temperature is stabled, measure the frequency stability.
5.
The test shall be performed under -30 to 55 centigrade and 85 to 115 percent of the nominal voltage.
Change setting of chamber and external power source to complete all conditions.
3.6.3
Test Setup
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 125 of 127
3.6.4
Test Result of Frequency Stability
Frequency:
5320 MHz
Frequency Drift (ppm)
Temperature ( C)
0 minute
2 minutes
5 minutes
10 minutes
T20°CVmax
0.05
-0.39
0.40
0.02
T20°CVmin
0.19
0.57
0.91
0.47
T55°CVnom
1.38
1.21
1.63
1.27
T50°CVnom
0.56
1.20
0.51
0.61
T40°CVnom
0.46
0.34
0.45
0.48
T30°CVnom
0.33
0.77
0.31
0.30
T20°CVnom
0.42
0.49
0.59
0.89
T10°CVnom
-0.17
0.05
0.10
0.27
T0°CVnom
0.30
0.34
0.13
0.57
T-10°CVnom
0.77
1.44
0.34
1.21
T-20°CVnom
-0.20
0.56
0.32
0.12
T-30°CVnom
0.12
0.39
-0.14
-0.08
Vnom [Vac]: 120
Vmax [Vac]: 138
Vmin [Vac]: 102
Tnom [°C]: 20
Tmax [°C]: 55
Tmin [°C]: -30
Frequency:
5785 MHz
Frequency Drift (ppm)
Temperature ( C)
0 minute
2 minutes
5 minutes
10 minutes
T20°CVmax
-0.11
-0.22
0.22
0.16
T20°CVmin
0.43
0.71
0.79
0.36
T55°CVnom
0.08
0.15
0.36
-0.25
T50°CVnom
0.31
0.58
0.39
0.39
T40°CVnom
0.44
0.00
0.02
0.39
T30°CVnom
0.85
1.02
1.13
0.87
T20°CVnom
0.10
0.27
0.42
-0.06
T10°CVnom
0.03
0.75
0.63
0.51
T0°CVnom
0.29
0.26
0.15
0.68
T-10°CVnom
0.27
0.67
0.87
0.04
T-20°CVnom
-0.20
0.14
-0.14
-0.01
T-30°CVnom
0.23
0.46
0.63
0.66
Vnom [Vac]: 120
Vmax [Vac]: 138
Vmin [Vac]: 102
Tnom [°C]: 20
Tmax [°C]: 55
Tmin [°C]: -30
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 126 of 127
4
Test laboratory information
Established in 2012, ICC provides foremost EMC & RF Testing and advisory consultation services by our
skilled engineers and technicians. Our services employ a wide variety of advanced edge test equipment and
one of the widest certification extents in the business.
International Certification Corp (EMC and Wireless Communication Laboratory), it is our definitive objective is
to institute long term, trust-based associations with our clients. The expectation we set up with our clients is
based on outstanding service, practical expertise and devotion to a certified value structure. Our passion is to
grant our clients with best EMC / RF services by oriented knowledgeable and accommodating staff.
Our Test sites are located at Linkou District and Kwei Shan District. Location map can be found on our
website http://www.icertifi.com.tw.
Linkou
Kwei Shan
Kwei Shan Site II
Tel: 886-2-2601-1640
Tel: 886-3-271-8666
Tel: 886-3-271-8640
No. 30-2, Ding Fwu Tsuen, Lin
Kou District, New Taipei City,
Taiwan, R.O.C.
No. 3-1, Lane 6, Wen San 3rd St.,
Kwei Shan District, Tao Yuan City
333, Taiwan, R.O.C.
No. 14-1, Lane 19, Wen San 3rd
St., Kwei Shan District, Tao Yuan
City 333, Taiwan, R.O.C.
If you have any suggestion, please feel free to contact us as below information.
Tel: 886-3-271-8666
Fax: 886-3-318-0155
Email: ICC_Service@icertifi.com.tw
══END══
Report No.: FR6N2801AN
Report Version: Rev. 01
Page : 127 of 127
Download: M120000015 IEEE 802.11A/B/G/N/AC DUAL 3T3R WIFI PCIE Test Report _NII Panasonic Avionics Corporation
Mirror Download [FCC.gov]M120000015 IEEE 802.11A/B/G/N/AC DUAL 3T3R WIFI PCIE Test Report _NII Panasonic Avionics Corporation
Document ID3360715
Application IDBQ6xjtWXgdBqPGaLWvXCIg==
Document DescriptionTest Report_NII
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize189.69kB (2371135 bits)
Date Submitted2017-04-18 00:00:00
Date Available2017-04-18 00:00:00
Creation Date2017-12-30 05:02:46
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-12-30 05:02:46
Document TitleTest Report_NII
Document CreatorMicrosoft® Word 2010

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:53b24725-9c9a-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:09 08:08:23Z
Create Date                     : 2017:07:09 08:08:23Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:53b24725-9c9a-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled
EXIF Metadata provided by EXIF.tools

Facebook Twitter Google+ RSS © FCCID.io 2018