FCC ID U88GSTICELITE1943

LTE/CDMA ICS RF Repeater

by GS Instech Co., Ltd.

Grantee Code: U88   Product Code: GSTICELITE1943
Latest application date: 2016-11-24

FCC ID Device Details

FCC IDU88GSTICELITE1943
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeU88
Product CodeGSTICELITE1943
Applicant BusinessGS Instech Co., Ltd. 🇰🇷
Related Domains gsinstrument.com
Equipment ClassLTE/CDMA ICS RF Repeater
Test FirmHCT Co., LTD

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
1850-1915 MHzOriginal Equipment2016-11-24

Exhibits

DocumentTypeAvailableFile
GST-IC-ELITE-1943_User Manual_V1.3_Rev.1Users Manual2017-05-23PDF 4.5 MB
GST-IC-ELITE-1943_Internal PhotosInternal Photos2017-05-23PDF 2.9 MB
GST-IC-ELITE-1943_External PhotosExternal Photos2017-05-23PDF 864.4 KB
GST-IC-ELITE-1943_ID Label_Rev.1ID Label/Location Info2016-11-24PDF 325.6 KB
GST-IC-ELITE-1943_Test Setup PhotoTest Setup Photos2017-05-23PDF 485.7 KB
GST-IC-ELITE-1943_Test Report_rev.02_Part 1Test Report2016-11-24PDF 5.3 MB
GST-IC-ELITE-1943_Test Report_rev.02_Part 2Test Report2016-11-24PDF 5.6 MB
GST-IC-ELITE-1943_Test Report_rev.02_Part 3Test Report2016-11-24PDF 5.4 MB
GST-IC-ELITE-1943_Attestation letter for Warning Label Message_Part20Cover Letter(s)2016-11-24PDF 6.5 KB
GST-IC-ELITE-1943_Confidentiality LetterCover Letter(s)2016-11-24PDF 81.4 KB
GST-IC-ELITE-1943_FCC_Authorization LetterCover Letter(s)2016-11-24PDF 31.8 KB
GST-IC-ELITE-1943_FCC MPE REPORT_Rev.2RF Exposure Info2016-11-24PDF 268.9 KB
GST-IC-ELITE-1943_System Block Diagrm Metadata onlyBlock DiagramPDF 874.4 KB
GST-IC-ELITE-1943_Circuit Diagram Metadata onlySchematicsPDF 5.3 MB
GST-IC-ELITE-1943_Operational Description Metadata onlyOperational DescriptionPDF 1.7 MB
GST-IC-ELITE-1943_Part List Metadata onlyParts List/Tune Up InfoPDF 1,007.7 KB
GST-IC-ELITE-1943_Tune-up Procedure_V1.0 Metadata onlyParts List/Tune Up InfoPDF 4.4 MB

Application Information

Application ID4cRHfEKKRmx2opgK+6nCaA==
Final Action Date2016-11-24
Application PurposeOriginal Equipment
Applicant FRN0016367252
ModelGSTICELITE1943
Frequency Range1850-1915 MHz
Equipment ClassB2I - Part 20 Industrial Booster (CMRS)
Device DescriptionLTE/CDMA ICS RF Repeater
Responsible PartyGuanyong Jung, jky0514@gsinstrument.com , +82328705525
Test FirmSang Lee, HCT Co., LTD, sjlee@HCT.co.kr , 82-31-645-6420
TCB Emailtcb@hctamerica.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityYes
Short-Term Confidentiality Date05/23/2017
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsBooster. Power output listed is conducted. Devices supporting CDMA, EVDO, and LTE will be the intended use. The wireless module (FCC ID N7NMC7355) is part of a booster system for monitoring and control the booster. RF Exposure compliance for the device was based on maximum antenna gain 3.0dBi at 1900 MHz of the wireless module. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 150 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements for satisfying RF exposure compliance. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. RF exposure compliance must need to be addressed at the time of licensing as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b) (3) of the rules.

Applications

Application IDDatePurpose
4cRHfEKKRmx2opgK+6nCaA==2016-11-24Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
1850-1915 MHz1.068AmpG7W24E
1850-1915 MHz1.029AmpF9W24E
1930-1995 MHz21.077AmpG7W24E
1930-1995 MHz22.949AmpF9W24E

Grants

TCB Grant - Application 4cRHfEKKRmx2opgK+6nCaA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  HCT America LLC
1726 Ringwood Avenue
San Jose, CA 95131
Date of Grant: 11/24/2016

Application Dated: 11/24/2016
GS Instech Co., Ltd.
1385-14, Juan-Dong, Nam-Ku
Incheon, 402-200
South Korea
 
Attention: Guanyong Jung

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U88GSTICELITE1943
Name of Grantee:  GS Instech Co., Ltd.
Equipment Class: Part 20 Industrial Booster (CMRS)
Notes: LTE/CDMA ICS RF Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1930.0  -  1995.0 21.077  Amp G7W
24E 1930.0  -  1995.0 22.949  Amp F9W
24E 1850.0  -  1915.0 1.068  Amp G7W
24E 1850.0  -  1915.0 1.029  Amp F9W

Booster. Power output listed is conducted. Devices supporting CDMA, EVDO, and LTE will be the intended use. The wireless module (FCC ID N7NMC7355) is part of a booster system for monitoring and control the booster. RF Exposure compliance for the device was based on maximum antenna gain 3.0dBi at 1900 MHz of the wireless module. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 150 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements for satisfying RF exposure compliance. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. RF exposure compliance must need to be addressed at the time of licensing as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b) (3) of the rules.

EAS Grant - Application 4cRHfEKKRmx2opgK+6nCaA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

GS Instech Co., Ltd.
1385-14, Juan-Dong, Nam-Ku
Incheon, 402-200
South Korea
  Date of Grant: 11/24/2016

Application Dated: 11/24/2016
 
Attention: Guanyong Jung

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  U88GSTICELITE1943
Name of Grantee:  GS Instech Co., Ltd.
Equipment Class: Part 20 Industrial Booster (CMRS)
Notes: LTE/CDMA ICS RF Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1930.0  -  1995.0 21.077  Amp G7W
24E 1930.0  -  1995.0 22.949  Amp F9W
24E 1850.0  -  1915.0 1.068  Amp G7W
24E 1850.0  -  1915.0 1.029  Amp F9W

Booster. Power output listed is conducted. Devices supporting CDMA, EVDO, and LTE will be the intended use. The wireless module (FCC ID N7NMC7355) is part of a booster system for monitoring and control the booster. RF Exposure compliance for the device was based on maximum antenna gain 3.0dBi at 1900 MHz of the wireless module. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 150 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements for satisfying RF exposure compliance. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. RF exposure compliance must need to be addressed at the time of licensing as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b) (3) of the rules.



Mail To: