FCC ID U8G-P1AX02
Peplink Pepwave Wireless Product
by PISMO LABS TECHNOLOGY LIMITED
Grantee Code: U8G Product Code: P1AX02
Latest application date: 2025-06-11
FCC ID Device Details
| FCC ID | U8G-P1AX02 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | U8G |
| Product Code | P1AX02 |
| Applicant Business | PISMO LABS TECHNOLOGY LIMITED |
| Related Domains |  peplink.com |
| Equipment Class | Peplink Pepwave Wireless Product |
| Test Firm | Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2025-06-11 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2025-06-11 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2025-01-16 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2025-01-16 |
| 5180-5240 MHz | Original Equipment | 2021-05-31 |
| 2412-2462 MHz | Original Equipment | 2021-05-31 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual-1 | Users Manual | 2021-11-27 | PDF 5.6 MB |
| User Manual-2 | Users Manual | 2021-11-27 | PDF 5.3 MB |
| User Manual-3 | Users Manual | 2021-11-27 | PDF 5.7 MB |
| Internal Photos | Internal Photos | 2025-06-11 | PDF 1.1 MB |
| Internal Photos | Internal Photos | 2025-01-16 | PDF 1,003.5 KB |
| Internal Photos | Internal Photos | 2021-11-27 | PDF 4.1 MB |
| External Photos | External Photos | 2025-06-11 | PDF 1.5 MB |
| External Photos | External Photos | 2025-01-16 | PDF 1.6 MB |
| External Photos | External Photos | 2021-11-27 | PDF 1.7 MB |
| ID Label-1 | ID Label/Location Info | 2025-01-16 | PDF 90.5 KB |
| ID Label-2 | ID Label/Location Info | 2025-01-16 | PDF 91.3 KB |
| ID Label Location | ID Label/Location Info | 2021-05-31 | PDF 59.1 KB |
| ID Label-1 | ID Label/Location Info | 2021-05-31 | PDF 153.1 KB |
| ID Label-2 | ID Label/Location Info | 2021-05-31 | PDF 76.5 KB |
| Test Setup Photos | Test Setup Photos | 2025-06-11 | PDF 1,020.2 KB |
| Test Setup Photos_15B | Test Setup Photos | 2025-06-11 | PDF 1.6 MB |
| Test Setup Photos_15C | Test Setup Photos | 2025-06-11 | PDF 1,020.2 KB |
| Test Setup Photos | Test Setup Photos | 2025-01-16 | PDF 565 KB |
| Test Setup Photos_15B | Test Setup Photos | 2025-01-16 | PDF 879.5 KB |
| Test Setup Photos_JAD | Test Setup Photos | 2021-11-27 | PDF 516.2 KB |
| Test Setup Photos_NII | Test Setup Photos | 2021-11-27 | PDF 680.6 KB |
| Test Report_15B | Test Report | 2025-06-11 | PDF 675.8 KB |
| Test Report_5G | Test Report | 2025-06-11 | PDF 569.6 KB |
| Test Report_WLAN 2.4G | Test Report | 2025-06-11 | PDF 487.6 KB |
| Test report_Co-located | Test Report | 2025-06-11 | PDF 634.6 KB |
| Test Report_Antenna | Test Report | 2025-01-16 | PDF 2.2 MB |
| Test Report_Co-located | Test Report | 2025-01-16 | PDF 567.4 KB |
| Test Report_JAD | Test Report | 2025-01-16 | PDF 538.5 KB |
| Test Report_DTS | Test Report | 2021-05-31 | PDF 4.7 MB |
| Test Report_NII-1 | Test Report | 2021-05-31 | PDF 3.7 MB |
| Test Report_NII-2 | Test Report | 2021-05-31 | PDF 3.6 MB |
| Test Report_JAD | Test Report | 2021-05-30 | PDF 1,011.7 KB |
| Covered Equipment Certification Attestation Letter | Attestation Statements | 2025-06-11 | PDF 114.7 KB |
| US Agent Attestation | Attestation Statements | 2025-06-11 | PDF 371.2 KB |
| US Agent and Cover Equipment letter | Attestation Statements | 2025-06-11 | PDF 371.2 KB |
| Covered Equipment Certification Attestation Letter | Attestation Statements | 2025-01-16 | PDF 117 KB |
| US Agent Attestation | Attestation Statements | 2025-01-16 | PDF 672.3 KB |
| C2PC_Description of Change Letter | Cover Letter(s) | 2025-06-11 | PDF 1.5 MB |
| C2PC_Description of Change Letter | Cover Letter(s) | 2025-01-16 | PDF 848.2 KB |
| Declaration Letter_DTS Channels | Cover Letter(s) | 2021-05-31 | PDF 97.2 KB |
| LTCR Letter | Cover Letter(s) | 2021-05-31 | PDF 968.4 KB |
| STCR Letter | Cover Letter(s) | 2021-05-31 | PDF 623 KB |
| RF Exposure Report | RF Exposure Info | 2025-06-11 | PDF 318.6 KB |
| RF Exposure | RF Exposure Info | 2025-01-16 | PDF 260.6 KB |
| RF Exposure Information | RF Exposure Info | 2021-05-31 | PDF 456.4 KB |
| Block Diagrams Metadata only | Block Diagram | PDF 95.3 KB | |
| Schematics Metadata only | Schematics | PDF 666.5 KB | |
| Operational Description Metadata only | Operational Description | PDF 278.5 KB |
Application Information
| Application ID | rl3YUo27JRkL8LuuJef8ig== |
|---|---|
| Final Action Date | 2025-06-11 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0016347064 |
| Model | P1AX02 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Peplink Pepwave Wireless Product |
| Responsible Party | Antony Chong, Director of Hardware Engineering, antonyc@peplink.com , 85229907634 |
| Test Firm | Richard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@bureauveritas.com  , +886-3-260-0884 |
| TCB Email | vina.kerai@nemko.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. This device has 20 MHz, 40MHz and 80MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provided separation distance of at least 23cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is approved with a certified licensed transmitter (FCC ID: N7NEM91, FCC ID: QIPMV31-W). Class II Permissive Change: to add a certified licensed module FN990A40-HP (FCC ID: RI7FN990A40HP) and the relevant non-RF modification, and then to address the relevant verification evaluation as documented in this filing. Class II Permissive Change: to add some non-RF modifications and address the relevant verification evaluations as documented in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| rl3YUo27JRkL8LuuJef8ig== | 2025-06-11 | Class II permissive change or modification of presently authorized equipment |
| SHB1R0dFWPs5wz3W1sdtyw== | 2025-06-11 | Class II permissive change or modification of presently authorized equipment |
| RrrLh3yD1cSR2+2n1ji5CQ== | 2025-06-11 | Class II permissive change or modification of presently authorized equipment |
| sJM0XWDehsi9QQ+PhRAWXQ== | 2025-01-16 | Class II permissive change or modification of presently authorized equipment |
| UIKrcs/IyFhEyPWW3HeE4g== | 2025-01-16 | Class II permissive change or modification of presently authorized equipment |
| Hozo+TrCJujkA9ObcFBYrg== | 2025-01-16 | Class II permissive change or modification of presently authorized equipment |
| bo2ympONtL0YSa6aHSonBg== | 2021-05-31 | Original Equipment |
| 685tt7ARFvGLIvKtehNvpA== | 2021-05-31 | Original Equipment |
| afoXvMq8n5xVprAvopKefQ== | 2021-05-30 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application UIKrcs/IyFhEyPWW3HeE4g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 01/16/2025 Application Dated: 01/16/2025 |
| PISMO LABS TECHNOLOGY LIMITED |
| A8, 5/F, HK Spinners Industrial Building, Phase 6, |
| 481 Castle Peak Road, |
| Cheung Sha Wan, Hong Kong |
| Attention: Antony Chong , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U8G-P1AX02 |
| Name of Grantee: | PISMO LABS TECHNOLOGY LIMITED |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Peplink Pepwave Wireless Product |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.3456 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.4227 |
| Output power listed is conducted. This device has 20 MHz, 40MHz and 80MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provided separation distance of at least 23cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is approved with a certified licensed transmitter (FCC ID: N7NEM91, FCC ID: QIPMV31-W). Class II Permissive Change: to add a certified licensed module FN990A40-HP (FCC ID: RI7FN990A40HP) and the relevant non-RF modification, and then to address the relevant verification evaluation as documented in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application UIKrcs/IyFhEyPWW3HeE4g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
PISMO LABS TECHNOLOGY LIMITED A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong |
Date of Grant: 01/16/2025 Application Dated: 01/16/2025 |
| Attention: Antony Chong , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U8G-P1AX02 |
| Name of Grantee: | PISMO LABS TECHNOLOGY LIMITED |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Peplink Pepwave Wireless Product |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.3456 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.4227 |
| Output power listed is conducted. This device has 20 MHz, 40MHz and 80MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provided separation distance of at least 23cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is approved with a certified licensed transmitter (FCC ID: N7NEM91, FCC ID: QIPMV31-W). Class II Permissive Change: to add a certified licensed module FN990A40-HP (FCC ID: RI7FN990A40HP) and the relevant non-RF modification, and then to address the relevant verification evaluation as documented in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 01/16/2025 Application Dated: 01/16/2025 |
| PISMO LABS TECHNOLOGY LIMITED |
| A8, 5/F, HK Spinners Industrial Building, Phase 6, |
| 481 Castle Peak Road, |
| Cheung Sha Wan, Hong Kong |
| Attention: Antony Chong , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U8G-P1AX02 |
| Name of Grantee: | PISMO LABS TECHNOLOGY LIMITED |
| Equipment Class: | Digital Transmission System |
| Notes: | Peplink Pepwave Wireless Product |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2642 |
| Output power listed is conducted. This device has 20 MHz and 40MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provided separation distance of at least 23cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is approved with a certified licensed transmitter (FCC ID: N7NEM91, FCC ID: QIPMV31-W). Class II Permissive Change: to add a certified licensed module FN990A40-HP (FCC ID: RI7FN990A40HP) and the relevant non-RF modification, and then to address the relevant verification evaluation as documented in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application sJM0XWDehsi9QQ+PhRAWXQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
PISMO LABS TECHNOLOGY LIMITED A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong |
Date of Grant: 01/16/2025 Application Dated: 01/16/2025 |
| Attention: Antony Chong , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U8G-P1AX02 |
| Name of Grantee: | PISMO LABS TECHNOLOGY LIMITED |
| Equipment Class: | Digital Transmission System |
| Notes: | Peplink Pepwave Wireless Product |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2642 |
| Output power listed is conducted. This device has 20 MHz and 40MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provided separation distance of at least 23cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is approved with a certified licensed transmitter (FCC ID: N7NEM91, FCC ID: QIPMV31-W). Class II Permissive Change: to add a certified licensed module FN990A40-HP (FCC ID: RI7FN990A40HP) and the relevant non-RF modification, and then to address the relevant verification evaluation as documented in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 06/11/2025 Application Dated: 06/11/2025 |
| PISMO LABS TECHNOLOGY LIMITED |
| A8, 5/F, HK Spinners Industrial Building, Phase 6, |
| 481 Castle Peak Road, |
| Cheung Sha Wan, Hong Kong |
| Attention: Antony Chong , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U8G-P1AX02 |
| Name of Grantee: | PISMO LABS TECHNOLOGY LIMITED |
| Equipment Class: | Digital Transmission System |
| Notes: | Peplink Pepwave Wireless Product |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2642 |
| Output power listed is conducted. This device has 20 MHz and 40MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provided separation distance of at least 23cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is approved with a certified licensed transmitter (FCC ID: N7NEM91, FCC ID: QIPMV31-W). Class II Permissive Change: to add a certified licensed module FN990A40-HP (FCC ID: RI7FN990A40HP) and the relevant non-RF modification, and then to address the relevant verification evaluation as documented in this filing. Class II Permissive Change: to add some non-RF modifications and address the relevant verification evaluations as documented in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application RrrLh3yD1cSR2+2n1ji5CQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 06/11/2025 Application Dated: 06/11/2025 |
| PISMO LABS TECHNOLOGY LIMITED |
| A8, 5/F, HK Spinners Industrial Building, Phase 6, |
| 481 Castle Peak Road, |
| Cheung Sha Wan, Hong Kong |
| Attention: Antony Chong , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U8G-P1AX02 |
| Name of Grantee: | PISMO LABS TECHNOLOGY LIMITED |
| Equipment Class: | Part 15 Class A Digital Device |
| Notes: | Peplink Pepwave Wireless Product |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| This device is approved with a certified licensed transmitter (FCC ID: N7NEM91, FCC ID: QIPMV31-W). Class II Permissive Change: to add a certified licensed module FN990A40-HP (FCC ID: RI7FN990A40HP) and the relevant non-RF modification, and then to address the relevant verification evaluation as documented in this filing. Class II Permissive Change: to add some non-RF modifications and address the relevant verification evaluations as documented in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application rl3YUo27JRkL8LuuJef8ig==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 06/11/2025 Application Dated: 06/11/2025 |
| PISMO LABS TECHNOLOGY LIMITED |
| A8, 5/F, HK Spinners Industrial Building, Phase 6, |
| 481 Castle Peak Road, |
| Cheung Sha Wan, Hong Kong |
| Attention: Antony Chong , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U8G-P1AX02 |
| Name of Grantee: | PISMO LABS TECHNOLOGY LIMITED |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Peplink Pepwave Wireless Product |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.3456 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.4227 |
| Output power listed is conducted. This device has 20 MHz, 40MHz and 80MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provided separation distance of at least 23cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is approved with a certified licensed transmitter (FCC ID: N7NEM91, FCC ID: QIPMV31-W). Class II Permissive Change: to add a certified licensed module FN990A40-HP (FCC ID: RI7FN990A40HP) and the relevant non-RF modification, and then to address the relevant verification evaluation as documented in this filing. Class II Permissive Change: to add some non-RF modifications and address the relevant verification evaluations as documented in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application Hozo+TrCJujkA9ObcFBYrg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 01/16/2025 Application Dated: 01/16/2025 |
| PISMO LABS TECHNOLOGY LIMITED |
| A8, 5/F, HK Spinners Industrial Building, Phase 6, |
| 481 Castle Peak Road, |
| Cheung Sha Wan, Hong Kong |
| Attention: Antony Chong , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U8G-P1AX02 |
| Name of Grantee: | PISMO LABS TECHNOLOGY LIMITED |
| Equipment Class: | Part 15 Class A Digital Device |
| Notes: | Peplink Pepwave Wireless Product |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| This device is approved with a certified licensed transmitter (FCC ID: N7NEM91, FCC ID: QIPMV31-W). Class II Permissive Change: to add a certified licensed module FN990A40-HP (FCC ID: RI7FN990A40HP) and the relevant non-RF modification, and then to address the relevant verification evaluation as documented in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Hozo+TrCJujkA9ObcFBYrg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
PISMO LABS TECHNOLOGY LIMITED A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan, Hong Kong |
Date of Grant: 01/16/2025 Application Dated: 01/16/2025 |
| Attention: Antony Chong , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U8G-P1AX02 |
| Name of Grantee: | PISMO LABS TECHNOLOGY LIMITED |
| Equipment Class: | Part 15 Class A Digital Device |
| Notes: | Peplink Pepwave Wireless Product |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| This device is approved with a certified licensed transmitter (FCC ID: N7NEM91, FCC ID: QIPMV31-W). Class II Permissive Change: to add a certified licensed module FN990A40-HP (FCC ID: RI7FN990A40HP) and the relevant non-RF modification, and then to address the relevant verification evaluation as documented in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 05/31/2021 Application Dated: 05/31/2021 |
| PISMO LABS TECHNOLOGY LIMITED |
| A8, 5/F, HK Spinners Industrial Building, Phase 6, |
| 481 Castle Peak Road, |
| Cheung Sha Wan,, Hong Kong |
| Attention: Antony Chong , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U8G-P1AX02 |
| Name of Grantee: | PISMO LABS TECHNOLOGY LIMITED |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PEPWAVE / peplink Wireless Product |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.3456 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.4227 |
| Output power listed is conducted. This device has 20 MHz, 40MHz and 80MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provided separation distance of at least 23cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is approved with a certified licensed transmitter (FCC ID: N7NEM91, FCC ID: QIPMV31-W). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application bo2ympONtL0YSa6aHSonBg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
PISMO LABS TECHNOLOGY LIMITED A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan,, Hong Kong |
Date of Grant: 05/31/2021 Application Dated: 05/31/2021 |
| Attention: Antony Chong , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U8G-P1AX02 |
| Name of Grantee: | PISMO LABS TECHNOLOGY LIMITED |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PEPWAVE / peplink Wireless Product |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.3456 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.4227 |
| Output power listed is conducted. This device has 20 MHz, 40MHz and 80MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provided separation distance of at least 23cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is approved with a certified licensed transmitter (FCC ID: N7NEM91, FCC ID: QIPMV31-W). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 05/30/2021 Application Dated: 05/30/2021 |
| PISMO LABS TECHNOLOGY LIMITED |
| A8, 5/F, HK Spinners Industrial Building, Phase 6, |
| 481 Castle Peak Road, |
| Cheung Sha Wan,, Hong Kong |
| Attention: Antony Chong , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U8G-P1AX02 |
| Name of Grantee: | PISMO LABS TECHNOLOGY LIMITED |
| Equipment Class: | Part 15 Class A Digital Device |
| Notes: | PEPWAVE / peplink Wireless Product |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| This device is approved with a certified licensed transmitter (FCC ID: N7NEM91, FCC ID: QIPMV31-W). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application afoXvMq8n5xVprAvopKefQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
PISMO LABS TECHNOLOGY LIMITED A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan,, Hong Kong |
Date of Grant: 05/30/2021 Application Dated: 05/30/2021 |
| Attention: Antony Chong , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U8G-P1AX02 |
| Name of Grantee: | PISMO LABS TECHNOLOGY LIMITED |
| Equipment Class: | Part 15 Class A Digital Device |
| Notes: | PEPWAVE / peplink Wireless Product |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| This device is approved with a certified licensed transmitter (FCC ID: N7NEM91, FCC ID: QIPMV31-W). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 05/31/2021 Application Dated: 05/31/2021 |
| PISMO LABS TECHNOLOGY LIMITED |
| A8, 5/F, HK Spinners Industrial Building, Phase 6, |
| 481 Castle Peak Road, |
| Cheung Sha Wan,, Hong Kong |
| Attention: Antony Chong , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U8G-P1AX02 |
| Name of Grantee: | PISMO LABS TECHNOLOGY LIMITED |
| Equipment Class: | Digital Transmission System |
| Notes: | PEPWAVE / peplink Wireless Product |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2642 |
| Output power listed is conducted. This device has 20 MHz and 40MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provided separation distance of at least 23cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is approved with a certified licensed transmitter (FCC ID: N7NEM91, FCC ID: QIPMV31-W). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 685tt7ARFvGLIvKtehNvpA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
PISMO LABS TECHNOLOGY LIMITED A8, 5/F, HK Spinners Industrial Building, Phase 6, 481 Castle Peak Road, Cheung Sha Wan,, Hong Kong |
Date of Grant: 05/31/2021 Application Dated: 05/31/2021 |
| Attention: Antony Chong , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U8G-P1AX02 |
| Name of Grantee: | PISMO LABS TECHNOLOGY LIMITED |
| Equipment Class: | Digital Transmission System |
| Notes: | PEPWAVE / peplink Wireless Product |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2642 |
| Output power listed is conducted. This device has 20 MHz and 40MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provided separation distance of at least 23cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is approved with a certified licensed transmitter (FCC ID: N7NEM91, FCC ID: QIPMV31-W). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |