FCC ID U99EWLAN1
802.11abgn Module
by Hirschmann Automation and Control GmbH
Grantee Code: U99 Product Code: EWLAN1
Latest application date: 2020-08-10
FCC ID Device Details
| FCC ID | U99EWLAN1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | U99 |
| Product Code | EWLAN1 |
| Applicant Business | Hirschmann Automation and Control GmbH 🇩🇪 |
| Related Domains |  hirschmann.de |
| Equipment Class | 802.11abgn Module |
| Test Firm | PHOENIX TESTLAB GmbH |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 4940-4990 MHz | Original Equipment | 2020-08-10 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2016-05-31 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2016-05-31 |
| 2412-2462 MHz | Original Equipment | 2013-09-25 |
| 5180-5240 MHz | Original Equipment | 2013-09-25 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| user manual | Users Manual | 2020-08-10 | PDF 2.6 MB |
| integration manual | Users Manual | 2013-09-25 | PDF 466.7 KB |
| int photos | Internal Photos | 2020-08-10 | PDF 211.8 KB |
| int photos | Internal Photos | 2016-05-31 | PDF 163.5 KB |
| Int Photos24 F133448E1 | Internal Photos | 2013-09-25 | PDF 405.9 KB |
| Int photos5 F133448E2 | Internal Photos | 2013-09-25 | PDF 405.9 KB |
| int photos | Internal Photos | 2013-09-25 | PDF 405.9 KB |
| ext photos | External Photos | 2020-08-10 | PDF 479.8 KB |
| ext photos | External Photos | 2016-05-31 | PDF 3.1 MB |
| Ext photos 5 F133448E2 | External Photos | 2013-09-25 | PDF 339.7 KB |
| Ext photos24 F133448E1 | External Photos | 2013-09-25 | PDF 339.7 KB |
| ext photos | External Photos | 2013-09-25 | PDF 339.7 KB |
| label and Location | ID Label/Location Info | 2020-08-10 | PDF 128.4 KB |
| Label | ID Label/Location Info | 2013-09-25 | PDF 128.4 KB |
| label | ID Label/Location Info | 2013-09-25 | PDF 128.4 KB |
| test setup photos | Test Setup Photos | 2020-08-10 | PDF 3 MB |
| Test setup photos | Test Setup Photos | 2016-05-31 | PDF 1.1 MB |
| Test Setup photos F133448E1 | Test Setup Photos | 2013-09-25 | PDF 1.3 MB |
| Test Setup photos F133448E2 | Test Setup Photos | 2013-09-25 | PDF 1.3 MB |
| test setup photos | Test Setup Photos | 2013-09-25 | PDF 2.4 MB |
| test report | Test Report | 2020-08-10 | PDF 992.6 KB |
| Test report | Test Report | 2016-05-31 | PDF 946.1 KB |
| Test Report | Test Report | 2013-09-25 | PDF 1.5 MB |
| Test Report F133448E1 | Test Report | 2013-09-25 | PDF 1.4 MB |
| Test Report F133448E2 | Test Report | 2013-09-25 | PDF 1.4 MB |
| C2PC Letter | Cover Letter(s) | 2020-08-10 | PDF 591.3 KB |
| Change letter | Cover Letter(s) | 2020-08-10 | PDF 589.3 KB |
| LTC request | Cover Letter(s) | 2020-08-10 | PDF 599.1 KB |
| PoA | Cover Letter(s) | 2020-08-10 | PDF 41.7 KB |
| Class II change letter | Cover Letter(s) | 2016-05-31 | PDF 15.8 KB |
| PoA | Cover Letter(s) | 2016-05-31 | PDF 301.5 KB |
| class II letter | Cover Letter(s) | 2016-05-31 | PDF 15.8 KB |
| Agency Letter | Cover Letter(s) | 2013-09-25 | PDF 38.3 KB |
| Agency letter | Cover Letter(s) | 2013-09-25 | PDF 38.3 KB |
| LMA request | Cover Letter(s) | 2013-09-25 | PDF 20.3 KB |
| LTC letter | Cover Letter(s) | 2013-09-25 | PDF 43.1 KB |
| LTC request | Cover Letter(s) | 2013-09-25 | PDF 43.1 KB |
| RF Exposure | RF Exposure Info | 2020-08-10 | PDF 65.8 KB |
| tune up | Parts List/Tune Up Info | 2020-08-10 | PDF 47.4 KB |
| MPE | RF Exposure Info | 2013-09-25 | PDF 20.2 KB |
| MPE DTS24 | RF Exposure Info | 2013-09-25 | PDF 20.2 KB |
| MPE DTS5 | RF Exposure Info | 2013-09-25 | PDF 20.2 KB |
| Block Diagram Metadata only | Block Diagram | PDF 28.8 KB | |
| schematics Metadata only | Schematics | PDF 116.6 KB | |
| Operational Description Metadata only | Operational Description | PDF 60.4 KB | |
| data sheet Metadata only | Operational Description | PDF 115.7 KB | |
| software security Metadata only | SDR Software/Security Inf | PDF 1.6 MB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 34 KB |
Application Information
| Application ID | D8MoUxfq06zBv04sKLc61w== |
|---|---|
| Final Action Date | 2020-08-10 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0016401846 |
| Model | EWLAN1 |
| Frequency Range | 4940-4990 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | 802.11abgn Module |
| Responsible Party | Martin Burkhardt, Martin.Burkhardt@hirschmann.de , +497127 14 1370 |
| Agent | Sabrina Sabrina Sabrina, PHOENIX TESTLAB Gmbh, Berghahn.sabrina@phoenix-testlab.de  , +495235950083 |
| Test Firm | Holger Bentje, PHOENIX TESTLAB GmbH, office@phoenix-testlab.de , 49-5235-9500-24 |
| TCB Email | Brandhorst.dirk@phoenix-testlab.de |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz) |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change adds a new equipment class to the existing FCC ID as a result of a rule change. Class II Permissive Change updates filing to comply with new U-NII rules. This device must be professionally installed. Power listed is the maximum combined conducted output power as indicated in the filing. Approval is limited to OEM installation only, and the final host device into which this module is integrated should provide a stable 3.3 VDC power via PCI Express Interface, must be restricted to indoor use and categorized as fixed or mobile to comply with the FCC RF Exposure requirements. The antenna(s) used for this transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with the FCC multi-transmitter policy. OEM integrators must be provided with antenna installation instructions and end-users of the final host device must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. This device has 20 and 40 MHz BW modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| D8MoUxfq06zBv04sKLc61w== | 2020-08-10 | Original Equipment |
| WxTWlphmTSaM0FM5qTBRlQ== | 2016-05-31 | Class II permissive change or modification of presently authorized equipment |
| SpuWiJQFl5tB6q0GcxdvKg== | 2016-05-31 | Class II permissive change or modification of presently authorized equipment |
| oC7/eC9FGT5Vaom6pdzTvg== | 2013-09-25 | Original Equipment |
| CP7hq06k92AtgPJTqNw0LA== | 2013-09-25 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 2412-2462 MHz | 0.0440000 | 15C | CC, MO | ||
| 2412-2462 MHz | 0.044 | 15C | CC, MO | ||
| 2422-2452 MHz | 0.039 | 15C | CC, MO | ||
| 4940-4990 MHz | 0.0513000 | 5.2000000000% | 17M2F1D | 90Y | CC, MO |
| 5180-5240 MHz | 0.02 | 15E | 38, CC, MO | ||
| 5180-5240 MHz | 0.015 | 15E | CC, MO | ||
| 5190-5230 MHz | 0.015 | 15E | CC, MO | ||
| 5745-5825 MHz | 0.087 | 15E | 38, CC, MO | ||
| 5745-5825 MHz | 0.078 | 15C | CC, MO | ||
| 5755-5795 MHz | 0.071 | 15C | CC, MO |
Grants
TCB Grant - Application WxTWlphmTSaM0FM5qTBRlQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 05/31/2016 Application Dated: 05/31/2016 |
| Hirschmann Automation and Control GmbH |
| Stuttgarter Str. 45-51 |
| Neckartenzlingen, D-72654 Germany |
| Attention: Martin Burkhardt |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U99EWLAN1 |
| Name of Grantee: | Hirschmann Automation and Control GmbH |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11abgn Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.044 |
| Class II Permissive Change updates filing to comply with new U-NII rules. This device must be professionally installed. Power listed is the maximum combined conducted output power as indicated in the filing. Approval is limited to OEM installation only, and the final host device into which this module is integrated should provide a stable 3.3 VDC power via PCI Express Interface, must be restricted to indoor use and categorized as fixed or mobile to comply with the FCC RF Exposure requirements. The antenna(s) used for this transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with the FCC multi-transmitter policy. OEM integrators must be provided with antenna installation instructions and end-users of the final host device must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. This device has 20 and 40 MHz BW modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application WxTWlphmTSaM0FM5qTBRlQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hirschmann Automation and Control GmbH Stuttgarter Str. 45-51 Neckartenzlingen, D-72654 Germany |
Date of Grant: 05/31/2016 Application Dated: 05/31/2016 |
| Attention: Martin Burkhardt |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U99EWLAN1 |
| Name of Grantee: | Hirschmann Automation and Control GmbH |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11abgn Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.044 |
| Class II Permissive Change updates filing to comply with new U-NII rules. This device must be professionally installed. Power listed is the maximum combined conducted output power as indicated in the filing. Approval is limited to OEM installation only, and the final host device into which this module is integrated should provide a stable 3.3 VDC power via PCI Express Interface, must be restricted to indoor use and categorized as fixed or mobile to comply with the FCC RF Exposure requirements. The antenna(s) used for this transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with the FCC multi-transmitter policy. OEM integrators must be provided with antenna installation instructions and end-users of the final host device must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. This device has 20 and 40 MHz BW modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 05/31/2016 Application Dated: 05/31/2016 |
| Hirschmann Automation and Control GmbH |
| Stuttgarter Str. 45-51 |
| Neckartenzlingen, D-72654 Germany |
| Attention: Martin Burkhardt |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U99EWLAN1 |
| Name of Grantee: | Hirschmann Automation and Control GmbH |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11abgn Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.02 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.087 |
| Class II Permissive Change updates filing to comply with new U-NII rules. This device must be professionally installed. Power listed is the maximum combined conducted output power as indicated in the filing. Approval is limited to OEM installation only, and the final host device into which this module is integrated should provide a stable 3.3 VDC power via PCI Express Interface, must be restricted to indoor use and categorized as fixed or mobile to comply with the FCC RF Exposure requirements. The antenna(s) used for this transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with the FCC multi-transmitter policy. OEM integrators must be provided with antenna installation instructions and end-users of the final host device must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. This device has 20 and 40 MHz BW modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application SpuWiJQFl5tB6q0GcxdvKg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hirschmann Automation and Control GmbH Stuttgarter Str. 45-51 Neckartenzlingen, D-72654 Germany |
Date of Grant: 05/31/2016 Application Dated: 05/31/2016 |
| Attention: Martin Burkhardt |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U99EWLAN1 |
| Name of Grantee: | Hirschmann Automation and Control GmbH |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11abgn Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.02 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.087 |
| Class II Permissive Change updates filing to comply with new U-NII rules. This device must be professionally installed. Power listed is the maximum combined conducted output power as indicated in the filing. Approval is limited to OEM installation only, and the final host device into which this module is integrated should provide a stable 3.3 VDC power via PCI Express Interface, must be restricted to indoor use and categorized as fixed or mobile to comply with the FCC RF Exposure requirements. The antenna(s) used for this transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with the FCC multi-transmitter policy. OEM integrators must be provided with antenna installation instructions and end-users of the final host device must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. This device has 20 and 40 MHz BW modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 09/25/2013 Application Dated: 09/25/2013 |
| Hirschmann Automation and Control GmbH |
| Stuttgarter Str. 45-51 |
| Neckartenzlingen, D-72654 Germany |
| Attention: Martin Burkhardt |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U99EWLAN1 |
| Name of Grantee: | Hirschmann Automation and Control GmbH |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11abgn Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.044 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.039 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.078 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.071 |
| This device must be professionally installed. Power listed is the maximum combined peak conducted output power as indicated in the filing. Approval is limited to OEM installation only, and the host in which this module is integrated should provide stable 3.3 VDC power via PCI Express Interface. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz and 5755 to 5795 MHz. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application oC7/eC9FGT5Vaom6pdzTvg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hirschmann Automation and Control GmbH Stuttgarter Str. 45-51 Neckartenzlingen, D-72654 Germany |
Date of Grant: 09/25/2013 Application Dated: 09/25/2013 |
| Attention: Martin Burkhardt |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U99EWLAN1 |
| Name of Grantee: | Hirschmann Automation and Control GmbH |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11abgn Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.044 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.039 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.078 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.071 |
| This device must be professionally installed. Power listed is the maximum combined peak conducted output power as indicated in the filing. Approval is limited to OEM installation only, and the host in which this module is integrated should provide stable 3.3 VDC power via PCI Express Interface. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz and 5755 to 5795 MHz. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 08/10/2020 Application Dated: 08/07/2020 |
| Hirschmann Automation and Control GmbH |
| Stuttgarter Str. 45-51 |
| Neckartenzlingen, D-72654 Germany |
| Attention: Martin Burkhardt |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U99EWLAN1 |
| Name of Grantee: | Hirschmann Automation and Control GmbH |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | 802.11abgn Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 90Y | 4940.0 - 4990.0 | 0.0513 | 5.2 % | 17M2F1D |
| Class II Permissive Change adds a new equipment class to the existing FCC ID as a result of a rule change. Class II Permissive Change updates filing to comply with new U-NII rules. This device must be professionally installed. Power listed is the maximum combined conducted output power as indicated in the filing. Approval is limited to OEM installation only, and the final host device into which this module is integrated should provide a stable 3.3 VDC power via PCI Express Interface, must be restricted to indoor use and categorized as fixed or mobile to comply with the FCC RF Exposure requirements. The antenna(s) used for this transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with the FCC multi-transmitter policy. OEM integrators must be provided with antenna installation instructions and end-users of the final host device must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. This device has 20 and 40 MHz BW modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application D8MoUxfq06zBv04sKLc61w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hirschmann Automation and Control GmbH Stuttgarter Str. 45-51 Neckartenzlingen, D-72654 Germany |
Date of Grant: 08/10/2020 Application Dated: 08/07/2020 |
| Attention: Martin Burkhardt |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U99EWLAN1 |
| Name of Grantee: | Hirschmann Automation and Control GmbH |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | 802.11abgn Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 90Y | 4940.0 - 4990.0 | 0.0513 | 5.2 % | 17M2F1D |
| Class II Permissive Change adds a new equipment class to the existing FCC ID as a result of a rule change. Class II Permissive Change updates filing to comply with new U-NII rules. This device must be professionally installed. Power listed is the maximum combined conducted output power as indicated in the filing. Approval is limited to OEM installation only, and the final host device into which this module is integrated should provide a stable 3.3 VDC power via PCI Express Interface, must be restricted to indoor use and categorized as fixed or mobile to comply with the FCC RF Exposure requirements. The antenna(s) used for this transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with the FCC multi-transmitter policy. OEM integrators must be provided with antenna installation instructions and end-users of the final host device must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. This device has 20 and 40 MHz BW modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 09/25/2013 Application Dated: 09/24/2013 |
| Hirschmann Automation and Control GmbH |
| Stuttgarter Str. 45-51 |
| Neckartenzlingen, D-72654 Germany |
| Attention: Martin Burkhardt |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U99EWLAN1 |
| Name of Grantee: | Hirschmann Automation and Control GmbH |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11abgn Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.015 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.015 |
| This device must be professionally installed. Power listed is the maximum combined average conducted output power as indicated in the filing. Approval is limited to OEM installation only, and the host in which this module is integrated should provide stable 3.3 VDC power via PCI Express Interface. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application CP7hq06k92AtgPJTqNw0LA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hirschmann Automation and Control GmbH Stuttgarter Str. 45-51 Neckartenzlingen, D-72654 Germany |
Date of Grant: 09/25/2013 Application Dated: 09/24/2013 |
| Attention: Martin Burkhardt |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U99EWLAN1 |
| Name of Grantee: | Hirschmann Automation and Control GmbH |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11abgn Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.015 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.015 |
| This device must be professionally installed. Power listed is the maximum combined average conducted output power as indicated in the filing. Approval is limited to OEM installation only, and the host in which this module is integrated should provide stable 3.3 VDC power via PCI Express Interface. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is operating in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |