FCC ID U9R-W2CBW0015
WLAN+Bluetooth Module
by Wi2Wi, Inc
Grantee Code: U9R Product Code: W2CBW0015
Latest application date: 2014-01-13
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2014-01-13 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2013-03-14 |
| 2402-2480 MHz | Original Equipment | 2012-10-05 |
| 2412-2462 MHz | Original Equipment | 2012-10-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2014-01-13 | PDF 1 MB |
| Users Manual | Users Manual | 2013-04-03 | PDF 1.1 MB |
| Regulatory sheet | Users Manual | 2013-03-14 | PDF 150 KB |
| Internal Photos | Internal Photos | 2013-04-03 | PDF 285.7 KB |
| External Photos | External Photos | 2014-01-13 | PDF 364.5 KB |
| External Photos | External Photos | 2013-04-03 | PDF 285.7 KB |
| External photos | External Photos | 2013-03-14 | PDF 324.3 KB |
| Label | ID Label/Location Info | 2014-01-13 | PDF 243.6 KB |
| FCC ID Label | ID Label/Location Info | 2012-10-05 | PDF 46.3 KB |
| Operational Description | Operational Description | 2014-01-13 | PDF 252.1 KB |
| Set Up Photos | Test Setup Photos | 2014-01-13 | PDF 367.2 KB |
| Test Setup Photos | Test Setup Photos | 2013-04-03 | PDF 429.2 KB |
| Test setup | Test Setup Photos | 2013-03-14 | PDF 361.3 KB |
| Test Report | Test Report | 2014-01-13 | PDF 141.2 KB |
| Part 15 module report | Test Report | 2013-03-14 | PDF 1.6 MB |
| Spurious emissions report | Test Report | 2013-03-14 | PDF 3.2 MB |
| Test Report | Test Report | 2012-10-05 | PDF 1.6 MB |
| Attestation letter | Attestation Statements | 2013-03-14 | PDF 201.9 KB |
| Cover Letter | Cover Letter(s) | 2014-01-13 | PDF 287.9 KB |
| no BT letter | Cover Letter(s) | 2014-01-13 | PDF 232.5 KB |
| Agents letter | Cover Letter(s) | 2013-03-14 | PDF 22.3 KB |
| C2PC letter | Cover Letter(s) | 2013-03-14 | PDF 42.1 KB |
| Permission letter | Cover Letter(s) | 2013-03-14 | PDF 34.1 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2012-10-05 | PDF 91.6 KB |
| Limited Module Approval Letter | Cover Letter(s) | 2012-10-05 | PDF 49.9 KB |
| POA | Cover Letter(s) | 2012-10-05 | PDF 88.9 KB |
| RF Safety | RF Exposure Info | 2014-01-13 | PDF 23.4 KB |
| MPE calculation | RF Exposure Info | 2013-03-14 | PDF 215.3 KB |
| RF Exposure | RF Exposure Info | 2012-10-05 | PDF 71.7 KB |
Application Information
| Application ID | 7kTNO8m+8ESPJAvvvTe1gw== |
|---|---|
| Final Action Date | 2014-01-13 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0016375586 |
| Model | -W2CBW0015 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WLAN+Bluetooth Module |
| Responsible Party | Tony Fardanesh, CTO/VP of Engineering, tony@wi2wi.com  , 408-416-4207 |
| Agent | Alan Alan Alan, Nemko USA, alan.laudani@nemko.com  |
| Test Firm | Jim Morris, Nemko USA, Inc. - San Diego EMC Division, Jim.Morris@nemko.com , 760-444-3401 |
| TCB Email | stuart.beck@nemko.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Except for the configuration described in this filing, separate approval is required for all other operating configurations, including portable configurations with respect to §2.1093. Class II Change: This Class II Change adds additional antennas as described in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 7kTNO8m+8ESPJAvvvTe1gw== | 2014-01-13 | Class II permissive change or modification of presently authorized equipment |
| bykPMp9+Ii/stTRqMNrkuQ== | 2013-03-14 | Class II permissive change or modification of presently authorized equipment |
| VLesH5k7HBfnTGjjESHbGQ== | 2012-10-05 | Original Equipment |
| TCDx9IMVOH3XKwl5LQvCJQ== | 2012-10-05 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application VLesH5k7HBfnTGjjESHbGQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 10/05/2012 Application Dated: 10/05/2012 |
| Wi2Wi, Inc |
| 2107 N. 1st Street, Suite 540 |
| San Jose, CA 95131 |
| Attention: Tony Fardanesh , CTO/VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U9R-W2CBW0015 |
| Name of Grantee: | Wi2Wi, Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN+Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0102 |
| Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Except for the configuration described in this filing, separate approval is required for all other operating configurations, including portable configurations with respect to §2.1093. |
EAS Grant - Application VLesH5k7HBfnTGjjESHbGQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Wi2Wi, Inc 2107 N. 1st Street, Suite 540 San Jose, CA 95131 United States |
Date of Grant: 10/05/2012 Application Dated: 10/05/2012 |
| Attention: Tony Fardanesh , CTO/VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U9R-W2CBW0015 |
| Name of Grantee: | Wi2Wi, Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN+Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0102 |
| Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Except for the configuration described in this filing, separate approval is required for all other operating configurations, including portable configurations with respect to §2.1093. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 10/05/2012 Application Dated: 10/05/2012 |
| Wi2Wi, Inc |
| 2107 N. 1st Street, Suite 540 |
| San Jose, CA 95131 |
| Attention: Tony Fardanesh , CTO/VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U9R-W2CBW0015 |
| Name of Grantee: | Wi2Wi, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN+Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0388 | |||
| 15C | 2422.0 - 2452.0 | 0.0218 |
| Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Except for the configuration described in this filing, separate approval is required for all other operating configurations, including portable configurations with respect to §2.1093. |
EAS Grant - Application TCDx9IMVOH3XKwl5LQvCJQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Wi2Wi, Inc 2107 N. 1st Street, Suite 540 San Jose, CA 95131 United States |
Date of Grant: 10/05/2012 Application Dated: 10/05/2012 |
| Attention: Tony Fardanesh , CTO/VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U9R-W2CBW0015 |
| Name of Grantee: | Wi2Wi, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN+Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0388 | |||
| 15C | 2422.0 - 2452.0 | 0.0218 |
| Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Except for the configuration described in this filing, separate approval is required for all other operating configurations, including portable configurations with respect to §2.1093. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD BABT Octagon House, Concorde Way, Segensworth North, Fareham, PO15 5RL United Kingdom |
Date of Grant: 03/14/2013 Application Dated: 03/08/2013 |
| Wi2Wi, Inc |
| 2107 N. 1st Street, Suite 540 |
| San Jose, CA 95131 |
| Attention: Tony Fardanesh , CTO/VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U9R-W2CBW0015 |
| Name of Grantee: | Wi2Wi, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN+Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0388 | |||
| 15C | 2422.0 - 2452.0 | 0.0218 |
| Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Except for the configuration described in this filing, separate approval is required for all other operating configurations, including portable configurations with respect to §2.1093. Class II Change: This Class II Change adds additional antennas as described in this filing. |
EAS Grant - Application bykPMp9+Ii/stTRqMNrkuQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Wi2Wi, Inc 2107 N. 1st Street, Suite 540 San Jose, CA 95131 United States |
Date of Grant: 03/14/2013 Application Dated: 03/08/2013 |
| Attention: Tony Fardanesh , CTO/VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U9R-W2CBW0015 |
| Name of Grantee: | Wi2Wi, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN+Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0388 | |||
| 15C | 2422.0 - 2452.0 | 0.0218 |
| Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Except for the configuration described in this filing, separate approval is required for all other operating configurations, including portable configurations with respect to §2.1093. Class II Change: This Class II Change adds additional antennas as described in this filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko Canada Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 01/13/2014 Application Dated: 01/10/2014 |
| Wi2Wi, Inc |
| 2107 N. 1st Street, Suite 540 |
| San Jose, CA 95131 |
| Attention: Tony Fardanesh , CTO/VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U9R-W2CBW0015 |
| Name of Grantee: | Wi2Wi, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN+Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0388 | |||
| 15C | 2422.0 - 2452.0 | 0.0218 |
| Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Except for the configuration described in this filing, separate approval is required for all other operating configurations, including portable configurations with respect to §2.1093. Class II Change: This Class II Change adds additional antennas as described in this filing. |
EAS Grant - Application 7kTNO8m+8ESPJAvvvTe1gw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Wi2Wi, Inc 2107 N. 1st Street, Suite 540 San Jose, CA 95131 United States |
Date of Grant: 01/13/2014 Application Dated: 01/10/2014 |
| Attention: Tony Fardanesh , CTO/VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U9R-W2CBW0015 |
| Name of Grantee: | Wi2Wi, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN+Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0388 | |||
| 15C | 2422.0 - 2452.0 | 0.0218 |
| Limited Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Except for the configuration described in this filing, separate approval is required for all other operating configurations, including portable configurations with respect to §2.1093. Class II Change: This Class II Change adds additional antennas as described in this filing. |
| Mail To: |