FCC ID U9R-W2SW0001
802.11b/g module
by Wi2Wi, Inc
Grantee Code: U9R Product Code: W2SW0001
Latest application date: 2011-11-08
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2011-11-08 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2011-10-20 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2010-11-29 |
| 2412-2462 MHz | Original Equipment | 2007-10-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2007-10-05 | PDF 132.4 KB |
| Internal Photos | Internal Photos | 2011-11-08 | PDF 434 KB |
| Internal Photos | Internal Photos | 2010-11-29 | PDF 147.1 KB |
| Internal Photos | Internal Photos | 2007-10-05 | PDF 134.5 KB |
| External Photos | External Photos | 2011-11-08 | PDF 340.3 KB |
| Host Tablet Photos | External Photos | 2011-10-20 | PDF 279.3 KB |
| External Photos | External Photos | 2010-11-29 | PDF 350.8 KB |
| External Photos | External Photos | 2007-10-05 | PDF 192.9 KB |
| ID Label | ID Label/Location Info | 2011-11-08 | PDF 412.9 KB |
| Host PC Label Info | ID Label/Location Info | 2011-10-20 | PDF 151.9 KB |
| FCC ID Label | ID Label/Location Info | 2007-10-05 | PDF 83.3 KB |
| Antenna Info | Operational Description | 2011-11-08 | PDF 415.7 KB |
| Test Setup Photos | Test Setup Photos | 2010-11-29 | PDF 391.8 KB |
| Test Setup Photos | Test Setup Photos | 2007-10-05 | PDF 444.2 KB |
| Test Report | Test Report | 2010-11-29 | PDF 253.4 KB |
| Test Report | Test Report | 2007-10-05 | PDF 905.3 KB |
| Agent Authorization letter | Cover Letter(s) | 2011-11-08 | PDF 30 KB |
| Compliance Opinion | Cover Letter(s) | 2011-11-08 | PDF 15.5 KB |
| Cover letter | Cover Letter(s) | 2011-11-08 | PDF 402.5 KB |
| Letter requesting exhibit be superseded | Cover Letter(s) | 2011-11-08 | PDF 6.6 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2011-10-20 | PDF 89.5 KB |
| Class II Permissive Change Request Letter | Cover Letter(s) | 2010-11-29 | PDF 21.3 KB |
| Confidential Request Letter | Cover Letter(s) | 2007-10-05 | PDF 205.6 KB |
| Modular Approval Request | Cover Letter(s) | 2007-10-05 | PDF 1.4 MB |
| MPE Report updated 11-8-11 | RF Exposure Info | 2011-11-08 | PDF 231.6 KB |
| SAR Report | RF Exposure Info | 2011-10-20 | PDF 2.9 MB |
| Antenna Information | Parts List/Tune Up Info | 2010-11-29 | PDF 536.7 KB |
| RF Exposure Info | RF Exposure Info | 2007-10-05 | PDF 29.5 KB |
Application Information
| Application ID | gd5da4xiZlcCPNpYQg/zYw== |
|---|---|
| Final Action Date | 2011-11-08 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0016375586 |
| Model | -W2SW0001 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11b/g module |
| Responsible Party | Tony Fardanesh, CTO/VP of Engineering, tony@wi2wi.com  , 408-416-4207 |
| Test Firm | John Chan, Bay Area Compliance Laboratory, bacl.regulatory@baclcorp.com  , 408-732-9162 |
| TCB Email | dghizzone@nwemc.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. Class II Permissive Change described in this filing. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| gd5da4xiZlcCPNpYQg/zYw== | 2011-11-08 | Class II permissive change or modification of presently authorized equipment |
| 0zgPuQUb9jJbzZUtKCEF0A== | 2011-10-20 | Class II permissive change or modification of presently authorized equipment |
| lLVfz25SGUs6hu23qCK4Gg== | 2010-11-29 | Class II permissive change or modification of presently authorized equipment |
| rgFZhluwhkPnIdyIteu1RA== | 2007-10-05 | Original Equipment |
Grants
TCB Grant - Application rgFZhluwhkPnIdyIteu1RA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 10/05/2007 Application Dated: 10/05/2007 |
| Wi2Wi, Inc |
| 2107 N. 1st Street, Suite 540 |
| San Jose, CA 95131 |
| Attention: Tony Fardanesh , CTO/VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U9R-W2SW0001 |
| Name of Grantee: | Wi2Wi, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.03 | |||
| 15C | 2412.0 - 2462.0 | 0.017 |
| Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. |
EAS Grant - Application rgFZhluwhkPnIdyIteu1RA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Wi2Wi, Inc 2107 N. 1st Street, Suite 540 San Jose, CA 95131 United States |
Date of Grant: 10/05/2007 Application Dated: 10/05/2007 |
| Attention: Tony Fardanesh , CTO/VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U9R-W2SW0001 |
| Name of Grantee: | Wi2Wi, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.03 | |||
| 15C | 2412.0 - 2462.0 | 0.017 |
| Power listed is conducted. Modular Approval limited to devices where the antennas are located at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 11/29/2010 Application Dated: 11/29/2010 |
| Wi2Wi, Inc |
| 2107 N. 1st Street, Suite 540 |
| San Jose, CA 95131 |
| Attention: Tony Fardanesh , CTO/VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U9R-W2SW0001 |
| Name of Grantee: | Wi2Wi, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.03 | |||
| 15C | 2412.0 - 2462.0 | 0.017 |
| Power listed is conducted. Class II Permissive Change described in this filing. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. |
EAS Grant - Application lLVfz25SGUs6hu23qCK4Gg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Wi2Wi, Inc 2107 N. 1st Street, Suite 540 San Jose, CA 95131 United States |
Date of Grant: 11/29/2010 Application Dated: 11/29/2010 |
| Attention: Tony Fardanesh , CTO/VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U9R-W2SW0001 |
| Name of Grantee: | Wi2Wi, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.03 | |||
| 15C | 2412.0 - 2462.0 | 0.017 |
| Power listed is conducted. Class II Permissive Change described in this filing. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 11/08/2011 Application Dated: 11/08/2011 |
| Wi2Wi, Inc |
| 2107 N. 1st Street, Suite 540 |
| San Jose, CA 95131 |
| Attention: Tony Fardanesh , CTO/VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U9R-W2SW0001 |
| Name of Grantee: | Wi2Wi, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.03 | |||
| 15C | 2412.0 - 2462.0 | 0.017 |
| Power listed is conducted. Class II Permissive Change described in this filing. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. |
EAS Grant - Application gd5da4xiZlcCPNpYQg/zYw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Wi2Wi, Inc 2107 N. 1st Street, Suite 540 San Jose, CA 95131 United States |
Date of Grant: 11/08/2011 Application Dated: 11/08/2011 |
| Attention: Tony Fardanesh , CTO/VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U9R-W2SW0001 |
| Name of Grantee: | Wi2Wi, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.03 | |||
| 15C | 2412.0 - 2462.0 | 0.017 |
| Power listed is conducted. Class II Permissive Change described in this filing. Modular Approval limited to devices where the antennas are located at least 20 cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 10/20/2011 Application Dated: 10/20/2011 |
| Wi2Wi, Inc |
| 2107 N. 1st Street, Suite 540 |
| San Jose, CA 95131 |
| Attention: Tony Fardanesh , CTO/VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U9R-W2SW0001 |
| Name of Grantee: | Wi2Wi, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Module with Model 00015-0076-XX Tablet |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.03 | |||
| 15C | 2412.0 - 2462.0 | 0.017 |
| Class II permissive change by performing SAR evaluation in Video King Tablet as documented in this filing. Output power listed is conducted. Modular Approval. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. For mobile RF exposure operation, the antenna(s) must be installed to provide a separation distance of at least 20 cm from all persons. For portable RF exposure operation, the highest body SAR reported in this filing is 0.11 W/Kg in 2.4 GHz. |
EAS Grant - Application 0zgPuQUb9jJbzZUtKCEF0A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Wi2Wi, Inc 2107 N. 1st Street, Suite 540 San Jose, CA 95131 United States |
Date of Grant: 10/20/2011 Application Dated: 10/20/2011 |
| Attention: Tony Fardanesh , CTO/VP of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | U9R-W2SW0001 |
| Name of Grantee: | Wi2Wi, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Module with Model 00015-0076-XX Tablet |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.03 | |||
| 15C | 2412.0 - 2462.0 | 0.017 |
| Class II permissive change by performing SAR evaluation in Video King Tablet as documented in this filing. Output power listed is conducted. Modular Approval. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. For mobile RF exposure operation, the antenna(s) must be installed to provide a separation distance of at least 20 cm from all persons. For portable RF exposure operation, the highest body SAR reported in this filing is 0.11 W/Kg in 2.4 GHz. |
| Mail To: |