FCC ID UAWRAIFU200691501
Frequency Hopping UHF Reader
by Jiangsu Raifu Intelligent Tech. Co., Ltd.
Grantee Code: UAW Product Code: RAIFU200691501
Latest application date: 2006-10-17
FCC ID Device Details
| FCC ID | UAWRAIFU200691501 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | UAW |
| Product Code | RAIFU200691501 |
| Applicant Business | Jiangsu Raifu Intelligent Tech. Co., Ltd. 🇨🇳 |
| Related Domains |  sample.com |
| Equipment Class | Frequency Hopping UHF Reader |
| Test Firm | EMC Compliance Management Group |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.6-927.4 MHz | Class II permissive change or modification of presently authorized equipment | 2006-10-17 |
| 902.6-927.4 MHz | Original Equipment | 2006-07-03 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| users manual | Users Manual | 2006-10-17 | PDF 771.9 KB |
| User Manual | Users Manual | 2006-07-03 | PDF 1.5 MB |
| internal photos | Internal Photos | 2006-10-17 | PDF 836.1 KB |
| Internal Photos | Internal Photos | 2006-07-03 | PDF 555.5 KB |
| external photos | External Photos | 2006-10-17 | PDF 121.3 KB |
| External Photos | External Photos | 2006-07-03 | PDF 96 KB |
| label location | ID Label/Location Info | 2006-10-17 | PDF 44.9 KB |
| label sample | ID Label/Location Info | 2006-10-17 | PDF 50.5 KB |
| Label Location | ID Label/Location Info | 2006-07-03 | PDF 52.8 KB |
| Label Sample | ID Label/Location Info | 2006-07-03 | PDF 48.7 KB |
| digital board description | Operational Description | 2006-10-17 | PDF 6.5 KB |
| Circuit Description | Operational Description | 2006-07-03 | PDF 8 KB |
| test setup photos | Test Setup Photos | 2006-10-17 | PDF 127.9 KB |
| Test Set Up Photos | Test Setup Photos | 2006-07-03 | PDF 269.6 KB |
| test report | Test Report | 2006-10-17 | PDF 1.6 MB |
| Test Report | Test Report | 2006-07-03 | PDF 3.8 MB |
| Professional installation letter | Attestation Statements | 2006-07-03 | PDF 14.8 KB |
| cover letter | Cover Letter(s) | 2006-10-17 | PDF 665.6 KB |
| request for confidentiality | Cover Letter(s) | 2006-10-17 | PDF 32.8 KB |
| Confidentiality Request letter | Cover Letter(s) | 2006-07-03 | PDF 51.4 KB |
| Letter explaining differences between models | Cover Letter(s) | 2006-07-03 | PDF 6.9 KB |
| RF Exposure | RF Exposure Info | 2006-07-03 | PDF 83.7 KB |
| Block Diagram Metadata only | Block Diagram | PDF 55.3 KB | |
| block diagram Metadata only | Block Diagram | PDF 47.4 KB | |
| Schematic Metadata only | Schematics | PDF 959.3 KB | |
| schematics 1 Metadata only | Schematics | PDF 60.3 KB | |
| schematics 2 Metadata only | Schematics | PDF 83 KB |
Application Information
| Application ID | /nlFypf4iZHeWqx3/BS3bQ== |
|---|---|
| Final Action Date | 2006-10-17 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0015096639 |
| Model | RAIFU200691501 |
| Frequency Range | 902.6-927.4 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Frequency Hopping UHF Reader |
| Responsible Party | Xinmin Zhang, General Manager, zhangxin@sample.com , 86-25-84356665 |
| Test Firm | Paul Chen, EMC Compliance Management Group, pfchen@emclab2000.com  , 6509880900 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not exceed 6dBi. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change: This Class II change incorporates provision for a RJ45 Ethernet port in lieu of the previous Serial Comm Port. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| /nlFypf4iZHeWqx3/BS3bQ== | 2006-10-17 | Class II permissive change or modification of presently authorized equipment |
| Y1brp/6KC9qcTk6PhbQ5FQ== | 2006-07-03 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.6-927.4 MHz | 0.9000000 | 15C |
Grants
TCB Grant - Application Y1brp/6KC9qcTk6PhbQ5FQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/03/2006 Application Dated: 07/03/2006 |
| Jiangsu Raifu Intelligent Tech. Co., Ltd. |
| Sanbao Technology Park, 1 Huangzhuang Road |
| Maqun Technology Park, Qixia District |
| Nanjing City, Jiangsu, 210049 China |
| Attention: Xinmin Zhang , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UAWRAIFU200691501 |
| Name of Grantee: | Jiangsu Raifu Intelligent Tech. Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | UHF READER |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.6 - 927.4 | 0.9 |
| Power listed is Conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not exceed 6dBi. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application Y1brp/6KC9qcTk6PhbQ5FQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Jiangsu Raifu Intelligent Tech. Co., Ltd. Sanbao Technology Park, 1 Huangzhuang Road Maqun Technology Park, Qixia District Nanjing City, Jiangsu, 210049 China |
Date of Grant: 07/03/2006 Application Dated: 07/03/2006 |
| Attention: Xinmin Zhang , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UAWRAIFU200691501 |
| Name of Grantee: | Jiangsu Raifu Intelligent Tech. Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | UHF READER |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.6 - 927.4 | 0.9 |
| Power listed is Conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not exceed 6dBi. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 10/17/2006 Application Dated: 10/16/2006 |
| Jiangsu Raifu Intelligent Tech. Co., Ltd. |
| Sanbao Technology Park, 1 Huangzhuang Road |
| Maqun Technology Park, Qixia District |
| Nanjing City, Jiangsu, 210049 China |
| Attention: Xinmin Zhang , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UAWRAIFU200691501 |
| Name of Grantee: | Jiangsu Raifu Intelligent Tech. Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Frequency Hopping UHF Reader |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.6 - 927.4 | 0.9 |
| Power listed is conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not exceed 6dBi. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change: This Class II change incorporates provision for a RJ45 Ethernet port in lieu of the previous Serial Comm Port. |
EAS Grant - Application /nlFypf4iZHeWqx3/BS3bQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Jiangsu Raifu Intelligent Tech. Co., Ltd. Sanbao Technology Park, 1 Huangzhuang Road Maqun Technology Park, Qixia District Nanjing City, Jiangsu, 210049 China |
Date of Grant: 10/17/2006 Application Dated: 10/16/2006 |
| Attention: Xinmin Zhang , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UAWRAIFU200691501 |
| Name of Grantee: | Jiangsu Raifu Intelligent Tech. Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Frequency Hopping UHF Reader |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.6 - 927.4 | 0.9 |
| Power listed is conducted. This device must be professionally installed. The antenna(s) used for this transmitter must be fixed-mounted on indoor or outdoor permanent structures with a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not exceed 6dBi. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change: This Class II change incorporates provision for a RJ45 Ethernet port in lieu of the previous Serial Comm Port. |
| Mail To: |