FCC ID UAY-MMC85PL
MC85 Mini Card 11b/g/a/n Radio Card
by Marvell Semiconductor, Inc.
Grantee Code: UAY Product Code: MMC85PL
Latest application date: 2006-07-20
FCC ID Device Details
| FCC ID | UAY-MMC85PL |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | UAY |
| Product Code | MMC85PL |
| Applicant Business | Marvell Semiconductor, Inc. 🇺🇸 |
| Related Domains |  marvell.com |
| Equipment Class | MC85 Mini Card 11b/g/a/n Radio Card |
| Test Firm | Compliance Certification Services |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: UAY-MMC85M Grant Date: 07/18/2006 | 2006-07-20 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: UAY-MMC85M Grant Date: 07/18/2006 | 2006-07-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2006-09-03 | PDF 235.6 KB |
| ID label format | ID Label/Location Info | 2006-07-20 | PDF 66.5 KB |
| ID label format and location | ID Label/Location Info | 2006-07-20 | PDF 66.5 KB |
| Agency Authorization Letter | Cover Letter(s) | 2006-07-20 | PDF 1.1 MB |
| Applicant request letter | Cover Letter(s) | 2006-07-20 | PDF 64 KB |
| Request letter | Cover Letter(s) | 2006-07-20 | PDF 64 KB |
| Short confidentiality letter | Cover Letter(s) | 2006-07-20 | PDF 2.2 MB |
Application Information
| Application ID | iimCXpVJKFWZlghAQ6K5fg== |
|---|---|
| Final Action Date | 2006-07-20 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: UAY-MMC85M Grant Date: 07/18/2006 |
| Applicant FRN | 0015112121 |
| Model | MMC85PL |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | MC85 Mini Card 11b/g/a/n Radio Card |
| Responsible Party | Ken Wu, kwu@marvell.com , 408-222-9417 |
| Test Firm | Barbara Judge, Compliance Certification Services, bjudge@ccsemc.com  , 510-771-1104 |
| TCB Email | mike.kuo@ccsemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Short-Term Confidentiality Date | 09/03/2006 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Moduar Approval. Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x3 Spatial Multiplexing MIMO configurations as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided withtransmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is restricted to indoor-only use for 5.15-5.25 GHz band. Operations in the 5.25-5.35GHz band are subject to Section 15.37(l) and FCC-05-43A1 transition period. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| iimCXpVJKFWZlghAQ6K5fg== | 2006-07-20 | Change in identification of presently authorized equipment. Original FCC ID: UAY-MMC85M Grant Date: 07/18/2006 |
| bkLDV4qKFzHj/3WaePujfA== | 2006-07-20 | Change in identification of presently authorized equipment. Original FCC ID: UAY-MMC85M Grant Date: 07/18/2006 |
Equipment Authorization
Grants
TCB Grant - Application iimCXpVJKFWZlghAQ6K5fg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 07/20/2006 Application Dated: 07/19/2006 |
| Marvell Semiconductor, Inc. |
| 5488 Marvell Lane |
| Santa Clara, CA 95054 |
| Attention: Ken Wu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UAY-MMC85PL |
| Name of Grantee: | Marvell Semiconductor, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | MC85 Mini Card 11b/g/a/n Radio Card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.031 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.039 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.052 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.094 |
| Moduar Approval. Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x3 Spatial Multiplexing MIMO configurations as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided withtransmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is restricted to indoor-only use for 5.15-5.25 GHz band. Operations in the 5.25-5.35GHz band are subject to Section 15.37(l) and FCC-05-43A1 transition period. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application iimCXpVJKFWZlghAQ6K5fg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Marvell Semiconductor, Inc. 5488 Marvell Lane Santa Clara, CA 95054 United States |
Date of Grant: 07/20/2006 Application Dated: 07/19/2006 |
| Attention: Ken Wu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UAY-MMC85PL |
| Name of Grantee: | Marvell Semiconductor, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | MC85 Mini Card 11b/g/a/n Radio Card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.031 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.039 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.052 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.094 |
| Moduar Approval. Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x3 Spatial Multiplexing MIMO configurations as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided withtransmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Device is restricted to indoor-only use for 5.15-5.25 GHz band. Operations in the 5.25-5.35GHz band are subject to Section 15.37(l) and FCC-05-43A1 transition period. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 07/20/2006 Application Dated: 07/20/2006 |
| Marvell Semiconductor, Inc. |
| 5488 Marvell Lane |
| Santa Clara, CA 95054 |
| Attention: Ken Wu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UAY-MMC85PL |
| Name of Grantee: | Marvell Semiconductor, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | MC85 Mini Card 11b/g/a/n Radio Card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.536 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.452 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.526 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.515 |
| Moduar Approval. Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x3 Spatial Multiplexing MIMO configurations as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided withtransmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application bkLDV4qKFzHj/3WaePujfA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Marvell Semiconductor, Inc. 5488 Marvell Lane Santa Clara, CA 95054 United States |
Date of Grant: 07/20/2006 Application Dated: 07/20/2006 |
| Attention: Ken Wu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UAY-MMC85PL |
| Name of Grantee: | Marvell Semiconductor, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | MC85 Mini Card 11b/g/a/n Radio Card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.536 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.452 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.526 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.515 |
| Moduar Approval. Power listed is the maximum combined peak conducted output power. Device is a PCI-E Mini Card operating in 2x3 Spatial Multiplexing MIMO configurations as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided withtransmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |