FCC ID UB8-DLB7000

DIGITAL TRANSMISSION SYSTEM

by Deliberant LLC

Grantee Code: UB8   Product Code: DLB7000
Latest application date: 2007-05-03

FCC ID Device Details

FCC IDUB8-DLB7000
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeUB8
Product CodeDLB7000
Applicant BusinessDeliberant LLC 🇺🇸
Related Domains function-g.com
Equipment ClassDIGITAL TRANSMISSION SYSTEM
Test FirmRogers Labs, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2007-05-03
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: RIW-ZW-2200 Grant Date: 12/21/20062007-01-15

Exhibits

DocumentTypeAvailableFile
USERS MANUALUsers Manual2007-05-03PDF 2.8 MB
EXTERNAL PHOTOSExternal Photos2007-05-03PDF 51.8 KB
external photosExternal Photos2007-01-15PDF 1.2 MB
labelID Label/Location Info2007-01-15PDF 64.9 KB
TEST REPORTTest Report2007-05-03PDF 279.2 KB
CLASS II CHANGE LETTERCover Letter(s)2007-05-03PDF 18.4 KB
cover letterCover Letter(s)2007-01-15PDF 59.7 KB
MPE CALCULATIONRF Exposure Info2007-05-03PDF 19.9 KB

Application Information

Application IDs8rpr5tjoTrRcNJfUt9IXA==
Final Action Date2007-05-03
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0015148661
Model-DLB7000
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionDIGITAL TRANSMISSION SYSTEM
Responsible PartySimon Chou, General Manager, simonchou@function-g.com , 8007429865
Test FirmScot Rogers, Rogers Labs, Inc., rogers@micoks.net , 913-837-3214
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. Professional installation is required. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. CLASS II CHANGE: This Class II Change adds alternate antenna.

Applications

Application IDDatePurpose
s8rpr5tjoTrRcNJfUt9IXA==2007-05-03Class II permissive change or modification of presently authorized equipment
YSDyT/5Ialpb1zHuOc+d0A==2007-01-15Change in identification of presently authorized equipment. Original FCC ID: RIW-ZW-2200 Grant Date: 12/21/2006

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.0944115C20, 28, 36
5745-5825 MHz0.0610915C20, 28, 36

Grants

TCB Grant - Application YSDyT/5Ialpb1zHuOc+d0A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 01/15/2007

Application Dated: 01/15/2007
Deliberant LLC
138 Mountain Brook Dr
Canton, GA 30115
 
Attention: Simon Chou , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UB8-DLB7000
Name of Grantee:  Deliberant LLC
Equipment Class: Digital Transmission System
Notes: DIGITAL TRANSMISSION SYSTEM
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 28 36 15C 2412.0  -  2462.0 0.09441  
20 28 36 15C 5745.0  -  5825.0 0.06109  

Output power listed is conducted. Professional installation is required. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.

EAS Grant - Application YSDyT/5Ialpb1zHuOc+d0A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Deliberant LLC
138 Mountain Brook Dr
Canton, GA 30115
United States
  Date of Grant: 01/15/2007

Application Dated: 01/15/2007
 
Attention: Simon Chou , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UB8-DLB7000
Name of Grantee:  Deliberant LLC
Equipment Class: Digital Transmission System
Notes: DIGITAL TRANSMISSION SYSTEM
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 28 36 15C 2412.0  -  2462.0 0.09441  
20 28 36 15C 5745.0  -  5825.0 0.06109  

Output power listed is conducted. Professional installation is required. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.

Mail To:


EA197439

TCB Grant - Application s8rpr5tjoTrRcNJfUt9IXA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 05/03/2007

Application Dated: 05/03/2007
Deliberant LLC
138 Mountain Brook Dr
Canton, GA 30115
 
Attention: Simon Chou , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UB8-DLB7000
Name of Grantee:  Deliberant LLC
Equipment Class: Digital Transmission System
Notes: DIGITAL TRANSMISSION SYSTEM
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 28 36 15C 2412.0  -  2462.0 0.09441  
20 28 36 15C 5745.0  -  5825.0 0.06109  

Output power listed is conducted. Professional installation is required. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CLASS II CHANGE: This Class II Change adds alternate antenna.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.

EAS Grant - Application s8rpr5tjoTrRcNJfUt9IXA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Deliberant LLC
138 Mountain Brook Dr
Canton, GA 30115
United States
  Date of Grant: 05/03/2007

Application Dated: 05/03/2007
 
Attention: Simon Chou , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UB8-DLB7000
Name of Grantee:  Deliberant LLC
Equipment Class: Digital Transmission System
Notes: DIGITAL TRANSMISSION SYSTEM
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 28 36 15C 2412.0  -  2462.0 0.09441  
20 28 36 15C 5745.0  -  5825.0 0.06109  

Output power listed is conducted. Professional installation is required. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CLASS II CHANGE: This Class II Change adds alternate antenna.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.

Mail To:


EA223695